Audigy NX / Win XP not detected as USB Device! Can't Inst

My NX which is under a month old all of a sudden is not being detected by Windows XP anymore. I plugged it in today (it was working fine a few days ago) and it was giving washed out music when playing a CD - like everything was muffled and the bass was dominating. I unplugged it, replugged it in but Windows detected the USB device as "Audigy NX" and tried to reinstall the hardware, but failed, and that was the end of it - It did not appear under my device manager profiles, nor could I get it to work anymore with my laptop. I removed all the Audigy NX software, unplugged everything, went into safe mode and uninstalled the drivers, reinstalled the drivers... what it comes down to is that Windows won't even detect the hardware when I pull the cable out and plug it in again. What do I do when all the drivers & problem solutions are dependant on Windows seeing my USB device. (I even uninstalled the USB roots on my computer and redetected them.. it only found my USB mouse, but no the Audigy NX.) I haven't made any hardware or software changes since I last used it - I have been operating Windows XP Home edition, SP2 with no problems with the NX up until now. Perhaps its a Windows thing, but maybe you can offer some help.
Thanks,
Echostorm

Echostorm
Try doing a Cleansweep for the sound card. This information can be found at the Knowledgebase.
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jason

Similar Messages

HT1529 MY DONGLE IS NOT DETECTING IN USB PORT

Sir,
1. My dongle is not detecting in USB port; what to do?
2. How I can go to My Computer (like Windows) so that I can see filing system memory status?
3. For extending warranty what is the process?
Regards,
Subrata Dey

Assuming yu have a PC try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty

USB 2.0 Stick not detected on USB 3.0 port

Hey, When I plug in an USB 2.0 Stick into the USB 3.0 port of my T550, it is not detected. USB 3.0 harddisk works. I am working with Windows 10 64 bit.BIOS is updarted to the newest version. Thanks!Nathan

Hello. This is Kimberly from the customer experience team at Lenovo. Sorry you are having an issue. The product manager for T Series suggested the following: We assume that the USB 2.0 drive you are trying to connect functions in another computer. It is probably a formatting issue or a USB Registry Key Conflict. If reformatting the USB drive doesn't work, search for USB registry cleaner tools online to remove any conflicts/corrupted USB registry keys. Also, Microsoft may have some support tools to clean the USB registry keys

HT201263 my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

Hello Alex_boi941,
Thanks for using Apple Support Communities.
I'm sorry to hear that your iPhone's power button is not functioning correctly. To be able to get full functionality of your phone, it would need to be repaired.
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Take care,
Alex H.

Creative Sound Blaster Audigy NX won't register as a USB device!

@Creative Sound Blaster Audigy NX won't register as a USB device!H I just moved my computer to another location across the room.
I didn't drop or beat or throw anything. I picked things up, moved them, and set them down carefully. I didn't abuse anything at all.
Now, my Sound Blaster Audigy NX doesn't work anymore.
I plug it into my USB hub, nothing. I plug it into a USB port in my laptop, and nothing, either. None of the USB ports in the hub or the laptop work, even after restarting. The light on the hub doesn't even light up to detect the device at all. I can't turn it on. It doesn't seem to matter if my speakers are actually on or off, or whether I have sound playing on the computer or not.
I've restarted countless times, too.
It worked before I moved it, and now, my expensi've sound card doesn't work. What's up, now?

joaolfb,
Audigy 2 NX will need to be connected with the power adaptor inorder to run. USB will not be enough to sustain the power consumption of the sound card.
Jason

"Adobe Captivate could not detect a recording device ..."

Adobe Captivate shows my Snowflake USB microphone but doesn't record sound from it. When I choose Calibrate I get "Adobe Captivate could not detect a recording device". However, I can record from the microphone in all my other apps (Rosetta Stone, Sony SoundForge, etc.), so I know it's not a hardware issue.
When I go to "Sound" in Vista Pro's "Sound" option on control panel the Microphone is chosen as the default recording device, and I see the bars moving up and down when I talk.
What can I do to get "Captivate" to see the Mic?
A temporary workaround I found is to plug the Microphone into my laptop, then select SPDIF in as the input source. Captivate still gives the "... could not detect a recording device..." error, but the sound records anyway. This is kludgy, however.

Hi there
You may well just be out of luck. I heard Captivate 2 and Vista Pro used together. I don't believe Captivate was fully compliant with Vista until version 3. So that may explain things.
Unless someone pops in with a better idea, you should be able to record the audio separately, save as WAV or MP3 and import into your slides.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Wndows did not detect any biometric devices on this computer..

I have an HP ProBook 4540s running Windows 7 Professional w/IE11. I had to do a clean install of Windows 7 Pro and since then I cannot get my fingerprint reader to work at all. In my Control panel, under Biometric Devices, I recieve the message "Windows did not detect any biometrics devices on this computer". However, under Computer , Properties, Device Manager, Biometric Devices, the is Validity Sensors (WBF) (PID=003d).
I have tried to update, uninstall, re-install HP Simplepass, drivers, etc from the HP website, but nothing is working. Also I cannot find exactly what fingerpriint reader hardware is installed on the computer even though it is physically there as part of the original configuration.
I appreciate any assistance in resolving this issue.
Mark

Hello Mark531,
Welcome at the HP forums,
Are you searching for the following driver?
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64338.exe
Winos.
The doors of wisdom are never shut. Benjamin Franklin
We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

Bluetooth did not detect any Bluetooth device even iPhone please help me

I have iPhone 4 my Bluetooth did not detect any Bluetooth
Device even iPhone so I can not transfer any data to other iPhone
Please help me

That is correct.
This has never been a feature of iphone.
Sorry.
Bluetooth is supported for stereo headsets/speakers, telephone headsets/handsfree devices, some keyboards, some peer-to-peer apps from the apps store, tethering where provided by the carrier.
Other than these, it will not connect to another phone/device/computer/etc.

LabVIEW 2013 13.01f2 64 bit appears not to release USB device

As I attempt to migrate to 64 bit version I have a problem where it appears (for a lack of a better word) LabVIEW does not release the USB device properly when I programatically turn the power off for the USB device I am using (a spectrometer). This software works fine on the 32 bit version. The ONLY way I can get my device to work is by exiting either the EXE or the LabVIEW development system. Upon "wakeup" that is powering up the device, the DLL calls partially work, don't report errors but the device will not function properly. This a bit of a gray area since the company who wrote the DLL does not support the LabVIEW part very well and their example code works, but they don't power cycle the device.
Wish there was some sort of purge or release function. I have looked at the Know issues and I also put in a service request with NI.
If I don't get a fix for this I will have to abandon the sleep mode code.
Any help would be appreciated.
LeMur Technology Services, LLC
President
[email protected]
Toll Free: 877-761-2916
Cell: 609-577-2628
Fax: 215-862-9816

GleMunyan wrote:
As I attempt to migrate to 64 bit version I have a problem where it appears (for a lack of a better word) LabVIEW does not release the USB device properly when I programatically turn the power off for the USB device I am using (a spectrometer). This software works fine on the 32 bit version. The ONLY way I can get my device to work is by exiting either the EXE or the LabVIEW development system. Upon "wakeup" that is powering up the device, the DLL calls partially work, don't report errors but the device will not function properly. This a bit of a gray area since the company who wrote the DLL does not support the LabVIEW part very well and their example code works, but they don't power cycle the device.
Wish there was some sort of purge or release function. I have looked at the Know issues and I also put in a service request with NI.
If I don't get a fix for this I will have to abandon the sleep mode code.
Any help would be appreciated.
Was there a compelling reason to migrate to LV 64-bit? Were you feeling constrained by the 4GB memory limit? That would be one reason I would switch. (The other is if the equipment I was controlling only had 64-bit dlls). LV 64-bit has only limited support compared to LV 32-bit.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

My iPod Nano is not recognising its USB device, cannot download my music from iTunes library, what to do??

Why would my iPod nano suddenly not recognise its USB device? What the???? Cannot sychronise or transfer my music from my PC, had a back up USB & does not recognise this either. Please can s'one advise?
Thank you

Have you tried restarting your computer?

My Mac book Air (late 2010) does not detect built-in camera, can anyone help?

My Mac book Air (late 2010) does not detect built-in camera, can anyone help?

Is the apple tv on the latest firmware? and also make sure it is on (white light is on). I know that sounds stupid, but it will go to sleep if you let it sit long enough and i have seen many cases where you cannot acces it via airplay if it is asleep.

Sony Shake 5 not supporting my usb device; HELP

My new Sony Shake 5 (LBTSH2000) does not support my usb device (ipod classic); please help! Dirk.

Is there any error message on the screen when you tried using your iPod classic? Have you tried using just a standard USB device and see if that works?

Cd rom not detected in boot device selection list on hp compaq 2230s

Cd rom not detected in boot device selection list on hp compaq 2230s
unable to install operating system please help

Hi,
If the CD/DVD drive is not showing as a bootable device, then it could well be a hardware failure of the drive itself. The first thing you could try is to reset the bios defaults, save the changes and see if this helps. Next, I would check the connection of the CD/DVD drive in case that is the problem.
On the link below is the service manual for your PC. Page 50 explains how to remove, and if necessary, replace the CD/DVD drive. It also has the parts numbers should you require a replacement.
http://h10032.www1.hp.com/ctg/Manual/c01601955.pdf
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MBP Does Not Recognize External USB Devices

MBP does not "see" external USB devices (such as Garmin Nuvi GPS) or any thumb drive. No external USB devices show up in Finder nor does Disk Utility see them. No cable issues. Have tried restarting several times, but to no avail. This MBP used to recognize these USB devices, but no longer do so.
I have seen this question posed several times in forum, but no suitable answer. Don't know if it is H/W or S/W problem.

Hi Terry Temple
Is there at least any power going to the USB ports? ( as in if for example you plug in a USB light, will it switch on? )
If there is power in the USB ports it might be a software problem.
Try resetting the SMC see link: http://support.apple.com/kb/HT1411
also try re-set the PRAM see link: http://support.apple.com/kb/HT1379
However if you do not have any power at all it probably is a hardware problem.
Is it still under warranty?
Regards,
Andrew
Message was edited by: iddrew

Hi, I want to sync my Ipad to my computer to copy some photos from my Ipad, but it doesn't appear in my windows and it says my MTB USB Device can't connect, but it appears on my ITunes. How to configure it?

I want to copy my photo from my Ipad to my computer, but it says that MTB USB device can't connect to my computer, but it can connect to my Itunes. Is there something that can be done?

Hello Kvhviali,
The following article provides some useful information and tips that can help get your iPad's photos and videos imported.
iOS: Unable to import photos to computer
http://support.apple.com/kb/TS3195
Cheers,
Allen

Audigy NX / Win XP not detected as USB Device! Can't Inst

Similar Messages

Maybe you are looking for