Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Similar Messages

Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Sound Blaster Audigy Platinum BIG Proble

I have sound blaster audigy platinum and in few weeks I have got this strange problem that I?ve hadn't before. If I use old drivers for it, windows gives me blue screen with "bad pool caller" very often when I play or just listen music. With new drivers it gives me "driver irql not less or equal". At the same time in linux it works fine. In windows I've checked viruses etc. reinstalled windows many times, used memtest and so on. Finally 2 days ago I took my Sound blaster off my computer and ever since I haven't got any problems. So it obviously is the problem. But I just don't know what to do anymore to get it work? Now I use the sound card that comes integrated with my motherboard but it's not as good. Btw I don't use integrated sound card same time with sound blaster. Please Help!

Hate29,
You might find something useful here.

Audigy 1 Spontaneously Uninstalling, Phantom PCI Modem Shows

I have a weird problem happening with my Audigy card (XP Home SP2, motherboard is an A7N8X-E Deluxe). The other day when I reboot the machine, I was prompted to install a PCI modem. This was news to me since my machine doesn't have one! Then I noticed the sound wasn't working.
When I checked Device Manager, I saw this:
http://img299.imageshack.us/img299/87/missing2tu5.png
Under "Other devices", there's a "PCI Modem" with a yellow exclaimation mark. Under SCSI and Raid controllers, the "Silicon Image SiI 32 SATARaid Controller" is also yellow (I don't use RAID). Under "Sound, Video and game controllers", both "Creative Game Port" and "Creative SB Audigy" show in yellow.
When I reboot, everything is fine:
http://img30.imageshack.us/img30/588/missing3gn0.png
Nothing shows with a yellow exclamation mark, and that mysterious PCI modem has vanished.
This has happened twice so far. Anyone have any idea what is going on?
P.

I have a weird problem happening with my Audigy card (XP Home SP2, motherboard is an A7N8X-E Deluxe). The other day when I reboot the machine, I was prompted to install a PCI modem. This was news to me since my machine doesn't have one! Then I noticed the sound wasn't working.
When I checked Device Manager, I saw this:
http://img299.imageshack.us/img299/87/missing2tu5.png
Under "Other devices", there's a "PCI Modem" with a yellow exclaimation mark. Under SCSI and Raid controllers, the "Silicon Image SiI 32 SATARaid Controller" is also yellow (I don't use RAID). Under "Sound, Video and game controllers", both "Creative Game Port" and "Creative SB Audigy" show in yellow.
When I reboot, everything is fine:
http://img30.imageshack.us/img30/588/missing3gn0.png
Nothing shows with a yellow exclamation mark, and that mysterious PCI modem has vanished.
This has happened twice so far. Anyone have any idea what is going on?
P.

K8n NEO4 bios update to 1D: audigy + pci modem = no start (not even video signal

I updated my old 1.4 bios (alredy updated once) to 1D. The system was running fine but i was preparing for dual core update.
After bios update the neo4 was like dead. Not even video signal.
I removed both SB audigy and pci adsl modem and it started as usual.
If i add 1 pci card only (audigy OR PCI modem) the system works, while if i add BOTH the cards it is dead.
Changing slots did not solve the problem.
System is running with defaults values.
Any bios setting? do i have to go back to 1.4, 1.5 or 1.6 bios to use an athlon 64 X2 4800+?
Thx

Modded bios doesn't add cpu id code .
murdoK has a mod of 7125 here : http://msi-forum.de/thread.php?threadid=24337
4800 X2 supported since 1D according to this :
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=637&kind=1

Audigy 2 ZS Platinum and Stereo PCM

#Audigy 2 ZS Platinum and Stereo PCM? Hi,
Have an Audigy 2 ZS Platinum here and I'm having issues with having no audio when inputting Stereo PCM over Optical Toslink. I tried using both default and internal decoder, but no audio at all. It only works when using passthru/bypass mode. Tried a bunch of stereo inputs and had no audio at all. Is Stereo PCM not supported or what here? The test input streams were PCM two channel 48khz 6bit and 20bit. And Dolby Pro Logic is listed in the decoder tab with Auto, On, or Off. But maybe that isn't the same as Dolby Pro Logic II and that is why there is no audio. Only seems to work with Passthru mode only.
Message Edited by Seraphic on 04-7-2009 03:07 PMMessage Edited by Seraphic on 04-8-2009 0:44 PM

Hi, is anyone able to offe some help? Thanks

Audigy 1 Platinum and Prince of Persia:Warrior Wit

Ok, I have an Audigy Platinum. I recently updated to the latest drivers and everything. I usually don't like updating the drivers for this card, but i recently had to due to PowerDVD6 sound not working correctly in 5.. Well I fixed the PowerDVD6 problem, and now have a new problem. I recently installed Prince of Persia :Warrior Within, and once passed the UBI soft logo, the sound shuts off, and I'm left without sound. I also noticed that when I ALT-TAB back to the desktop, I go to my AUDIO HQ, and check the EAX Control panel, and its empty, no presets, or environments.. All I wanna know is, WHAT DO I DO?!!!!
I would hate to have to purchase a new Card, even I understand this is an older card..
Please Help!!:angry:

I have the same problem, is there some way to change the language settings?
Edit:: press the i (info button) then press twice the first button, you can choose languages by clicking the right flag
Message was edited by: Emiel187

Audigy 2 zs platinum and cubase sx prob

I bought a creative audigy 2 zs platinum and use cubase vst 2.02.
I chose creative asio in the vst multitrack window (devices menu).
the problem is the wave volume level in the creative mixer is not working when i use cubase. with other applications it works fine.
is "creative asio" the best choice to get low latency?
any suggestion is welcome_________amd duron ,60 GHz GB RAMXP professional splatest creative driversaudigy 2 zs platinum

Hi, is anyone able to offe some help? Thanks

Audigy platinum ex questions and advice - dual ouput or dual card - motherboard audio op has died

Hi all.
im new to the forums and would like some advice please.
i use my pc for mixing music and DJ'ing, but the problem that i have is that the onboard sound output has died. i need 2 intendant / separate sound outputs, one for preview, and one for main/live output.
Now, is it possible to configure a audigy platinum ex to provide the required outputs, and if so, how.
if this is not possible, can i use a soundblaster live card in the same pc to provide the required outputs, or as i suspect the answer is no to this due to shared file names within the drivers and such, is there a recommended card that i can use in conjunction with the audigy, or will any generic sound card do the job (for preview output).
i dont want to replace the motherboard and reinstall all the software at the moment, and i use mixmiester, fruityloops, reason and such for mixing/creating, and either mixmiester, tracktor, or pcdj fx for dj'ing.
many thanks in advance for your help and advice.
Adrian

mikiem ........... your a STAR.......
i didnt know that you could do that.....using the AISO driver allows access to all sorts of outputs..........when i have time im going to have to see what they all do, and what else is available, but the biggest thing is that it has sorted out some of my immediate problems......
i will need to go through all the software to see if i can get access to these outputs from it all, but it definitely works with mixmiester, so i dont need to re plot all the files.
just so that people know, i set the audigy speaker config to 4.0/4.1 in THX setup, and then looked in the advanced audio output section of mixmiester (under output config) and presto....2 independent audio outputs.
dont suppose that anyone knows where to get a complete and detailed manual for what all the software and hardware does and how to configure it all........
HUGE thanks mikiem........

Audigy Platinum Ex and XP and M

Have taken new PC back and got rid of Vista and had XP installed in the hope it would play an external Audigy Platinum Ex. The shop did not instal the game port. The midi I/O are on the front of?the box but the evolution MK-25 keyboard?won't make any sound - the MIDI device options listed are only?SB Audigy MIDI Port (DCOO). I've tried the XP control panel advice but the devices listed are different from those shown on mine. HELP.

am I right in thinking that if I am using the external box with a keyboard - not via the gameport - that BOTH THE midi in/out and midi/out in have to be connected ? The key board is an evolution Mk-25 and it only has a midi out ? As the game port is not installed - does this mean I am not able to use thanks ?

USB optical mouse suddenly stop working and PCI Modem driver

I have 2 Problems
1 . Driver not found for the PCI Modem -
2. Optical mouse stops working suddenly -QLX Mouse
i have reinstalled the XP before reinstalling i had no problem with mouse it working fine
PCI\VEN_8086&DEV_266D&SUBSYS_3080103C&REV_03\3&B1BFB68&0&F3
The drivers for this device are not installed. (Code 28)
Kindly sugest me the what to do

Hello rajeevkumar30
As I understand it you reinstalled Windows XP and now you have devices that are not being installed correctly? I would suggest that you visit the Compaq Presario V2000 CTO Notebook PC Drivers page and ensure that ALL your drivers and software are up to date. I would start with any BIOS and Firmware updates first than ensure your Drivers are up to date before moving on to your software.
As these are the drivers designed for your system this should resolve your issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Dolby Digital Live and Old Audigy Platinum Card

I have an now well aged Home Brew Computer based on an Asus P4PE MB, 2.4 Ghz P4, gig ram, SATA Raid 0, Plenty of HD free space. I went on a campaign to speed up the old beasty a little before I start thinking of a replacement some months down the road. I picked up a NOS (New Old Stock) Audigy Platinum Sound Card to lower the load on the processor and give me some more options like a digital input that my built in AC97 didn't have.
The SB Card worked pretty well at first. Hooked it up to an inexpensi've home theater I have in the room through its digital (front panel SPDIF) and we were off to the races. It all worked great. The sound was excellent, the system seemed to work better. The only problems were related to the usual issues with using a home theater with a computer digital output.
Along came the latest release of the driver and the Dolby Digital Li've. Now I seem to have the following issues:
Use DDL and you can't lock it into a 96K sample rate affecting sound quality
Many music files I was playing just fine now have what I guess could be termed "blanking." You get some very quick blank spots. Just an instant each time but enough to wreck the fun.
CTAIdSvc.exe is running all the time and eating processor resources. A quick check with the task manager sees it gyrating from 3 to about 3 percent continuously. This is at all times regardless of any use of sound.3% is bad enough. Running over 0% is no good.
Soooo, now I look to see if I can do a comparison between with and without DDL installed. Uhhhhhhhh, where is that part of the thing installed? Seems not to have anything in add\remove programs.
Also, what is with all the other stuff running related to this sound card. Licensing application? CT Helper, Ctsvccda, etc..
I'll probably try to remove the driver by re-running its install then try it with and without the Dolby thing. Maybe reinstalling the driver removes DDL

First of all it is not personal. I have nothing against you guys, your're not responsible for drivers development/testing. I'm fed up mostly with all those responsible for releasing buggy software without making proper checks if it will work. I know that you cannot say anything but I believe these guys are giving you headache as well; they don't have to listen complaints and deal with angry customers. First thing I would do is to get rid of your test manager . Releasing something without doing proper tests is just unacceptable; especially when product is suppose to reach thounsands of customers. Could you at least tell if driver developers were informed about this issue and trying to solve the problem? I'm buliding new machine and have to consider change of my soundcard; such information would very usefull. Cheers.

Audigy platinum. windows 7, problem with dts and dolby digital

HELP me!! a friend gave me his sound blaster audigy platinum...
all ok but when i test DTS or DOLBY DIGITAL in the windows7 menu they don't go!!
they go in spurts!
ps: sorry for bad english because i'm italian and i had translated by google!
plz help me!! thx a lot!!

Try copy those corrupted files and make sure you are using the same certificate and then re-encrypt the copied files and try decrypt them.
If possible, use the same account as you used for encryption.

SB Audigy Platinum SB0090 PlayCenter3_02_52 and SBAX_WBUP2_LB_2_09_0016 proble

I lost my original software CD's for my Audigy Platinum (SB0090.) I downloaded SBAX_WBUP2_LB_2_09_006 drivers and PlayCenter3_02_52 as per the SB download site. The drivers work correctly. When I try to load the PlayCenter3_02_52 it says it won't work with the drivers (SBAX_WBUP2_LB_2_09_006) and that it must have the newer Li've! drivers.
Frustrating to say the least. Incorrect files and a poor knowledge base make it so hard to install the devices. Can someone help with information on the product and files?
Thanks
Martin

Vielleicht habe ich das auch mit der Installation der Audigy verwechselt. Sorry.
Wenn ich derzeit die Treiber der X-Fi installiere, installiere ich immer die ben?tigten Anwendungen von der Original-CD. Erst danach mache ich die Updates von der Web-Seite drauf - allerdings immer manuell. Das Autoupdate habe ich leider noch nie probiert.
Bei der Audigy und 2 habe ich am Schluss auch immer nur die Treiber installiert, sonst nichts. Die Lautsprecher-Einstellungen habe ich dann einfach mit der Audio-Console vorgenommen. Lautst?rke, Bass, H?hen kann man ja genausogut mit den Standard-Windows-Programm vornehmen, den Sinn der zus?tzlichen Creatve-Programme ging mir zunehmend verloren. Bei der X-Fi kann ich leider nicht alles mit Board-Mitteln einstellen, deshalb installiere ich nun wieder die Software..
An Deiner Stelle w?rde ich alles mal deinstallieren. Dann Original-CD und die heruntergeladenen Updates installieren. So klappts bei der X-Fi wunderbar.
Gr?e
Charles

K7n2 delta, won't allow me to connect to the internet via pci modem

motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?

Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem.

Audigy Platinum and 56K PCI modem confl

Similar Messages

Maybe you are looking for