Audigy Platinum Ex and XP and M

Have taken new PC back and got rid of Vista and had XP installed in the hope it would play an external Audigy Platinum Ex. The shop did not instal the game port. The midi I/O are on the front of?the box but the evolution MK-25 keyboard?won't make any sound - the MIDI device options listed are only?SB Audigy MIDI Port (DCOO). I've tried the XP control panel advice but the devices listed are different from those shown on mine. HELP.

am I right in thinking that if I am using the external box with a keyboard - not via the gameport - that BOTH THE midi in/out and midi/out in have to be connected ? The key board is an evolution Mk-25 and it only has a midi out ? As the game port is not installed - does this mean I am not able to use thanks ?

Similar Messages

Help! audigy platinum

hi all, today i bought an audigy platinum pro, its installed and sounds great, but i have a couple of probs......i have just a 2. analogue set of speakers for now, connested to the card. but with the card i got an external box and remote control. but the box and remote arent working! the green power light is on, but thats it. i connected a mic up to it and opened up cubasis but there is no sound. its like its just dead......is this because i havent got digital speakers connected up, or have i done something wrong!? please help!!!

It sounds like you haven't configured the whole deal. You'll find information on how to do it in each of the program or software help files.

Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Audigy platinum ex questions and advice - dual ouput or dual card - motherboard audio op has died

Hi all.
im new to the forums and would like some advice please.
i use my pc for mixing music and DJ'ing, but the problem that i have is that the onboard sound output has died. i need 2 intendant / separate sound outputs, one for preview, and one for main/live output.
Now, is it possible to configure a audigy platinum ex to provide the required outputs, and if so, how.
if this is not possible, can i use a soundblaster live card in the same pc to provide the required outputs, or as i suspect the answer is no to this due to shared file names within the drivers and such, is there a recommended card that i can use in conjunction with the audigy, or will any generic sound card do the job (for preview output).
i dont want to replace the motherboard and reinstall all the software at the moment, and i use mixmiester, fruityloops, reason and such for mixing/creating, and either mixmiester, tracktor, or pcdj fx for dj'ing.
many thanks in advance for your help and advice.
Adrian

mikiem ........... your a STAR.......
i didnt know that you could do that.....using the AISO driver allows access to all sorts of outputs..........when i have time im going to have to see what they all do, and what else is available, but the biggest thing is that it has sorted out some of my immediate problems......
i will need to go through all the software to see if i can get access to these outputs from it all, but it definitely works with mixmiester, so i dont need to re plot all the files.
just so that people know, i set the audigy speaker config to 4.0/4.1 in THX setup, and then looked in the advanced audio output section of mixmiester (under output config) and presto....2 independent audio outputs.
dont suppose that anyone knows where to get a complete and detailed manual for what all the software and hardware does and how to configure it all........
HUGE thanks mikiem........

Dolby Digital Live and Old Audigy Platinum Card

I have an now well aged Home Brew Computer based on an Asus P4PE MB, 2.4 Ghz P4, gig ram, SATA Raid 0, Plenty of HD free space. I went on a campaign to speed up the old beasty a little before I start thinking of a replacement some months down the road. I picked up a NOS (New Old Stock) Audigy Platinum Sound Card to lower the load on the processor and give me some more options like a digital input that my built in AC97 didn't have.
The SB Card worked pretty well at first. Hooked it up to an inexpensi've home theater I have in the room through its digital (front panel SPDIF) and we were off to the races. It all worked great. The sound was excellent, the system seemed to work better. The only problems were related to the usual issues with using a home theater with a computer digital output.
Along came the latest release of the driver and the Dolby Digital Li've. Now I seem to have the following issues:
Use DDL and you can't lock it into a 96K sample rate affecting sound quality
Many music files I was playing just fine now have what I guess could be termed "blanking." You get some very quick blank spots. Just an instant each time but enough to wreck the fun.
CTAIdSvc.exe is running all the time and eating processor resources. A quick check with the task manager sees it gyrating from 3 to about 3 percent continuously. This is at all times regardless of any use of sound.3% is bad enough. Running over 0% is no good.
Soooo, now I look to see if I can do a comparison between with and without DDL installed. Uhhhhhhhh, where is that part of the thing installed? Seems not to have anything in add\remove programs.
Also, what is with all the other stuff running related to this sound card. Licensing application? CT Helper, Ctsvccda, etc..
I'll probably try to remove the driver by re-running its install then try it with and without the Dolby thing. Maybe reinstalling the driver removes DDL

First of all it is not personal. I have nothing against you guys, your're not responsible for drivers development/testing. I'm fed up mostly with all those responsible for releasing buggy software without making proper checks if it will work. I know that you cannot say anything but I believe these guys are giving you headache as well; they don't have to listen complaints and deal with angry customers. First thing I would do is to get rid of your test manager . Releasing something without doing proper tests is just unacceptable; especially when product is suppose to reach thounsands of customers. Could you at least tell if driver developers were informed about this issue and trying to solve the problem? I'm buliding new machine and have to consider change of my soundcard; such information would very usefull. Cheers.

Audigy platinum. windows 7, problem with dts and dolby digital

HELP me!! a friend gave me his sound blaster audigy platinum...
all ok but when i test DTS or DOLBY DIGITAL in the windows7 menu they don't go!!
they go in spurts!
ps: sorry for bad english because i'm italian and i had translated by google!
plz help me!! thx a lot!!

Try copy those corrupted files and make sure you are using the same certificate and then re-encrypt the copied files and try decrypt them.
If possible, use the same account as you used for encryption.

SB Audigy Platinum SB0090 PlayCenter3_02_52 and SBAX_WBUP2_LB_2_09_0016 proble

I lost my original software CD's for my Audigy Platinum (SB0090.) I downloaded SBAX_WBUP2_LB_2_09_006 drivers and PlayCenter3_02_52 as per the SB download site. The drivers work correctly. When I try to load the PlayCenter3_02_52 it says it won't work with the drivers (SBAX_WBUP2_LB_2_09_006) and that it must have the newer Li've! drivers.
Frustrating to say the least. Incorrect files and a poor knowledge base make it so hard to install the devices. Can someone help with information on the product and files?
Thanks
Martin

Vielleicht habe ich das auch mit der Installation der Audigy verwechselt. Sorry.
Wenn ich derzeit die Treiber der X-Fi installiere, installiere ich immer die ben?tigten Anwendungen von der Original-CD. Erst danach mache ich die Updates von der Web-Seite drauf - allerdings immer manuell. Das Autoupdate habe ich leider noch nie probiert.
Bei der Audigy und 2 habe ich am Schluss auch immer nur die Treiber installiert, sonst nichts. Die Lautsprecher-Einstellungen habe ich dann einfach mit der Audio-Console vorgenommen. Lautst?rke, Bass, H?hen kann man ja genausogut mit den Standard-Windows-Programm vornehmen, den Sinn der zus?tzlichen Creatve-Programme ging mir zunehmend verloren. Bei der X-Fi kann ich leider nicht alles mit Board-Mitteln einstellen, deshalb installiere ich nun wieder die Software..
An Deiner Stelle w?rde ich alles mal deinstallieren. Dann Original-CD und die heruntergeladenen Updates installieren. So klappts bei der X-Fi wunderbar.
Gr?e
Charles

Audigy Platinum Ex and Inspire Digital 5500 Speak

Having li'ved with my old Cambridge speakers now for about 3 years years I have recently noticed a sound similar to a distant rumble of thunder on the speakers, the longer they are left on the lounder and more frequent the rumble becomes. So, as they are getting on a bit I have decided to invest in a new set of speakers - Creative Inspire Digital 5500's, but they have yet to arri've.
Have I made a mistake in ordering these speakers? I have read several threads that intimate there may be a number of problems/incompatibility issues.
From what I can gather I either have to plug the speakers directly into the Audigy card outputs to retain the software advantages (5. speakers, base, treble and EAX) and then lose the manual ability to control the volume from the supplied Inspire Amp/mixer OR plug the speakers into the Amp/mixer and lose the software control.
My main use for the speakers is listening to music, not really interested in Dolby output or watching DVDs, screen and study too small, but I do occasionally watch a film or TV episode on the PC.
If anyone can either confirm or deny my percieved error in ordering these speakers it would be most appreciated.
Dave McCreath

Hi All
Answering my own question for others to find should they have any qualms.
New speakers arri'ved and installed. Connected to PC via coaxial input and work fine on both stereo (front left and right speakers only) and Dolby Pro Logic (all speakers - WOW!!).
Using Audio HQ, supplied with my Audigy software, I can test the speakers but only the front right and left work with the test. However, all work fine with the speaker test from the inspire 5500 remote - so verdict:
I am impressed with the quality, easy set up and sound manipulation. EAX also works fine!
Dave Mac

K8N Neo4 Platinum (PCB 1.0) and AMD 64 3800+ X2

Help!
I have a K8N Neo4 Platinum (PCB 1.0) and it had an AMD 64 3200+ single core CPU.
Now I've upgraded to an AMD 64 3800+ X2 dual core but the BIOS and MS Vista are seeing only the one core.
The BIOS is at the latest version - 1.D.
Whats' going on?
Hitch.

Quote from: hitchhiker on 20-April-07, 08:44:57
This motherboard does support the X2 CPU right?
It's listed as supported on the MSI website but has nayone else got both cores running on it?
Hitch.
Yes it does support X2
Did you clear cmos with power cable disconnected from psu?
Look at my signature for link to proper method.

CD playback distortion with Audigy 2NX after XP SP2 and Creative upda

I have an Audigy 2 NX attached to a Dell Inspiron 8600 running Windows XP Pro, Service Pack 2.
Sometime after I installed Service Pack 2, the Audigy stopped functioning completely. I cannot say when, exactly, it "broke," as I have not used it for a while, but I suspect the problem was related to SP2.
I uninstalled and reinstalled the Audigy software and then, using the "Software AutoUpdate" feature on your web site, installed the latest drivers, firmware and software. This process completed successfully.
The Audigy now "sort of" works. I am having problems playing CDs on the Inspiron's CD/DVD dri've. The output through the Audigy is distorted. This "distortion" is hard to describe. The Audigy seems to be "overloading," and the sound drops out briefly two or three times a second.
When I play MP3s through the Audigy, however, there is none of this overloading or distortion.
When I play CDs using the Inspiron's internal sound system, there is also no distortion.
I ran your diagnostics and no errors were reported.
Please let me know how I can go about fixing this problem as I would like to recover the Audigy's full capabilities.
With thanks,
Trip





Check your device manager IDE controller and ensure that DMA are enabled for the CD dri've.
Jason

Audigy 2 ZS Mixer/etc and X-Fi software in vista ultimate 32b

Hello there.
I currently have the Audigy 2 ZS sound card and i just upgrade to Windows Vista Ultimate 32bit.
I would like to find out if there is any planned software updates regarding the Audigy 2 zs. I installed the drivers but the creative mixer doesn't show up for me in Vista. I'am guessing this is due to the older drivers and software that was made for windows xp?
I also have a question about X-Fi Fatality series. Does the software included with it work properly in Windows Vista or are there problems just like with Audigy 2 zs?
Reason im asking is because i might upgrading to that soon as well

StormPetrel wrote:
A little bit off topic here, but 64bit does not mean more performance at all lol.
Sure, but there are in some cases drastic performence diferences. Under a fresh installed Vista X64 i have less CPU usage, as under 32 bit. But of course X64 uses more RAM (some tasks are double 32 and 64 bit).But the main reason I have more performence is, that the games I often play, get almost a boost. Dont ask me why, but under 64 bit EAW and FOC have the same FPS as under 32 bit. But under X64 I use a bit more Details and a higher resolution. (both are 32 bit games, so its a bit funy )?______________________?Sure there are other ways to install the drivers. But if some Setup dosent work, the first thing I try is to get it via Divice Management. And as this worked for me, I dont waste time to try other methods (Had bad experience, you can break the driver faster than install it *G*)?______________________?Some Questions I have left (after a few hours undr X64 with Creative Drivers):?Could it be, that the driver causes sometimes havy CPU usage?Could it also be, that the driver causes some lags, after you copy a file (the end sound, copy is finihed, but takes more time for "final finish", than without the drivers) - I know that Vista has some problems, on some PCs with copy, and that MS has an inoficial Patch (but dosent help for my PC so far)

Sound blaster Audigy LS, creative media center and creative playcenter wont install on

Hello. I have a sound blaster Audigy LS card in my computer, it came as a bundle in my Sony Vaio that I bought in october of last year. I wanted to download the creative media center, or the creative playcenter. I went through the process of downloads and support and tried to run them on my computer it either says Setup is unable to detect supported product on your system. Click retry button to redirect your device and continue the installation. I've tried clicking retry and and the same message comes up. I have Screenblast Sound Forge . for VAIO and Screenblast ACID 4.0 for VAIO and wonder if thos two audio programs (came with the computer also) are in conflict with installing creative products? The operating system i am using is windows xp media center edition version 2002. Thanks in advance for anyone that can help me.

Hi All,
I am pretty much in the same boat but with an Audigy 2 Value Sound Card.
Removed some old piece of rubbish card (6MB Aztech PCI 288 Q3D using a Trident 4DWave-NX Chip.... yes about 6 yrs old !) in my daughters pc and replaced it with the new one.
Same error message i.e. hardware not detected... ihave already posted as im trying to find and install the right drivers. I have also tried the PCI-slot hopping etc etc.
So what next people ?

SB Audigy 2NX USB - Sound distorted and interrupted after format

Salve,
due to some softwareproblems i had to format my hd, and reinstall my windows.
some specs first:
win xp prof, sp2, intel p4 2,2 desknote motherboard, sis vga, sis onboard sound
usb devices: ta 33 usb router, wacom intuos 3 and soundblaster audigy 2 nx
the funny thing is - before i formated, the sb worked well, i had no trouble.
then i got my graphic tablet - and it didn?t work properly - the pc chrashed every time i used the tablet. installing sp2 solved the prob, and sb and tablet worked well togehter.
i installed the system again, and first my onboard chips drivers were installed. i can't deaktivate them in the bios - so they are loaded, no matter if you want to or not.
then i connected the sb again, and the sound plays clean - but only on two speakers.
after installing the drivers, the sound was interrupted, or had some distortion.
i tried to deaktivate the onboar chip, but it didn?t solve the problem.
after installing my tablet - the sound got worse, and the mouse cursor often lagged or stucked. so i thought it could be a driver problem, or irq conflict. in installed sp2 again, but this time it did not fix anything.
i tried all i knew - deaktivate acpi, reinstall drivers, cleaning registry, re install and so on. then i calles the tech support - he gave me hints, i already tried, and gave me a alink for the webupdate drivers. i downed and istalled them - but still the same problems. i uninstalled my usb controllers, disconnected all other usb hardware, i even changed through all 4 ports - but the problem stayed. after 3 days i decided to format again - but - tadaaaa -it was useless. i still have the same problem - now one week is over and i?m fed up with this. i need my soundcard for making music, and playing dj sets....and i?m running out of time - so please - if anyone has an idea, i would be very glad.
i found out the distortion depends on cpu usage, but also changing the parameters of the hardwares, soundchip- and blasters accelaration did not help. dxdiag said it'ss all fine
with my system.
greetings,
psycho mantis,
germany

hi,
well i could fix the problem.
first i downloaded updates for my board and all the chips on it, and windows sp2 and so on...
but nothin worked. the problem was caused by the ir port. i disabled ir support in the bios, and then it worked fine. there was an interrupt channel conflict. now everything is fine

Headset no longer works with Audigy Platinum dr

I have a Logitech headset that plugs into the headphone and mic jacks on the Audigy Platinum dri've. On Saturday I had to do some work in my computer, so I disconnected the dri've from the card to get the data cable out of the way.
This may not be related (I hope not), but I plugged my floppy dri've in wrong and fried the floppy dri've and melted the wire to the PSU. I got a new floppy dri've and PSU. I don't believe the sound card or Platinum dri've were effected because they both work fine otherwise.
Anyway I no longer get any sound from my headphones when they're plugged into the dri've, but do get sound when they're plugged into the Creative Labs remote control for my speakers. I get no sound from my mic when it's plugged into the mic jack on the Platinum dri've either. I haven't tested it with another jack yet, but assume it'd work.
I also notice in my Windows mixer, that the option for Line In/Mic 2 is no longer there, either in the main part, or under Recording. Line In/Mic 2 is the mic jack on the Platinum Dri've.
The Platinum dri've works fine otherwise. I can use the firewire port on it and I know it's receiving power because I can see the red light in the optical connector. To be sure, I went back inside my computer and doublechecked the connections. It IS hooked up properly.
How can I get the jacks to work again, short of uninstalling/reinstalling the driver? I don't think this is necessary because the sound works otherwise. Thanks all!

The Audigy dri've works from three different cables. One is the power cable, one is the IEEE394 cable, and the last is the data cable. If the power cable and IEEE394 cables are connected, but the data cable is not fully seated, you will see power from the optical output and the 394 port will work, but the inputs and outputs will not work or be seen by the Windows mixer.
I would definitely try reseating that data cable. Also make sure that none of the pins are bent. If that doesn't work, you may want to try moving the card to different slots.

Audigy Platinum Ex and XP and M

Similar Messages

Maybe you are looking for