Audigy Player Driver, or compat iss

hello,
im a little confused on what driver i need as theres no reference to the audigy-player in driver menu,
im running win XP - SP2, dx9+ what file do i need?
weird thing is i ((was)) using the card on a .7 ghz perfectly even under heavy load no clipping at all now i have transferd card to a xeon dual .7ghz (3.4ghz) over a gig of ram, again xp-sp2 now the same song arrangments that was perfect on a single .7 are clipping badly. even near complete songs that are not useing any MIDI devices (internal or external) are doing the same, i was wondering is this a windows driver/dx9 etc , issue or is there a problem running audigy player on a dual system.
the driver that i installed was an old update i downloaded sometime ago pre sp 2, hence the request for newer driver, games dvds mp3s are perfect, only under song production clipping happens, cubase, fruity, are suffering only..
thanks

cheers bad boy,
i do have the original cd and the free game to, l give your one a go to,
i tryed a audigy driver yesterday on install it says selected components are not installed, sound properties shows sb d400, all drivices/software shows audigy. searching d400 on driver page finds nothing.
ok i know the card is pretty old now but i do like it, creative stuff inc my old gf2 graphic card are solid and stable only time i ever had probs is when i update direct x normaly required to run new software it would be a shame to upgarde something i like because of XP
cheers once again badboy , il head for the download now ,,, fingers crossed its a gooden

Similar Messages

  • LED setup on DTT3500 with Audigy Player card

    First off. I've connected my Audigy Player card to the control box of the DTT3500 speakers with a digital jack to DIN cable. I have the 9th light iluminated and the third. Is it okay to cycle through the different LED's, like when i want to play games and want to listen to music? Will i loose my digital output?
    Second, i have lost my Audigy driver CD, so I don't have Audio HQ etc. installed on my PC. Is there anywhere i can download them?
    Third, when i try to play DVD's in PowerDVD and set the sound output to Use SPDIF my input DIN light on the decoder starts flashing and i loose my sound. I can use it with 6 speakers/Dolby. What could be the problem here?
    Oh - and if i can't get Audio HQ how should i setup CTpanel?
    Message Edited by DildePer on 01-06-2005 12:38 PM
    Message Edited by DildePer on 01-06-2005 12:39 PM
    Message Edited by DildePer on 01-06-2005 04:23 PM

    I had the audigy zs platinum pro & DTT3500 set (connected via digital din) LED's set to....
    fourpoint/5.1 din & dolby digital DIN
    with just those the center speaker didnt really work, but it was the best setup i found for music/games/dvd's etc - so pretty much I was only using them as 4.1's but found it fine.

  • N73 and windows media player driver

    hi everyone,
    im having a problem installing the windows media player driver off the disc for the n73 it installs everything else but fails to install that anyone know where i can down load a copy.?
    ive got:
    pc suite 6.83
    windows xp service pack 2
    windows media player 11
    cheers

    I have the latest version of Windows Media Player 11. I have the same problem and will try to explain the steps in the best way I can.
    I connect the N73 to the laptop using a cable
    I select media player and press ok twice.
    Found New Hardware box appears and tells me "Windows needs to install driver software for your N73.
    I select the recommended option "Locate and install driver software"
    After a few moments I am then asked to insert the CD that came with the N73. It doesn't work as it is an old CD with old drivers from last year.
    I select I don't have CD option and I get "problems and reports caused by mobile phone" message etc.
    I have tried installing the latest CA-52 driver but I cannot install since I have the latest PC Suite. Windows Media Player is also set up to automatically download licenses required to play and synchronised tracks.

  • Audigy 2 driv

    i just reformatted my hard dri've and i lost the disk that came with sound card that has the drivers for it and this freaking website wont give me the drivers only updates that require the drivers already. so where the heck am i supposed to get the drivers from?

    i took my sound card out to see exactly what it is, model number SB0090 (with no M or G at the end)
    when i search the site by model number there is no SB0090, theres an SB0090M and SB0090G, both are some type of Audigy 2, but every time i download an audigy 2 driver, when i try to install it, it says"Setup could not detect any Sound Blaster Audigy 2/Sound Blaster Audigy on your system.
    Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
    Setup will now exit."
    and dont tell me that "its not in all the way" or anything like that i've taken it out and put it back in many times, i've tried it on 3 different slots on my mother board it keeps saying this and every time i turn on my computer it says windows detected new hardware so i know that it's being detected by windows so wtf is the problem? in the device manager its there under "Other Devices" as "Multimedia Audio Controller"
    when i do a search for drivers it comes up with nothing and when when i try to install any driver it doesnt work.

  • Qosmio F10 - Qosmio player driver

    How do I found out which version of Qosmio Player driver is installed ?

    Hi Christophe,
    I wonder how on earth you know my first name ^^
    Well, i had the same issue when i wanted to upgrade the QP on my E10.
    Actually, i didn't do anything at all to resize the partition and whatnot. I just burned the iso and installed from there and it works just fine.
    At first, it was locking up when booting the PC with the new Qosmio Player and i went half crazy trying to reburn the iso, reinstall etc..
    In fact, it was something wrong with my bios. I put it back to factory settings, installed the new QP and to my extreme happiness it was finally working.
    So if you have an issue with the new QP locking at start up (unable to change input sources when "i" is pressed), just reset the Bios to factory settings, then install QP.
    Let me know how it goes.
    Later,
    Alcahest

  • Audigy Player + DTT3500 prob

    Hi there
    Since this week i got a problem with my Audigy Player.
    Everytime i test my boxes with the Surround Mixer, i can hear the voice from the front boxes, but from the center and the rear boxes you can hear nothing...
    It seems to be a software problem, because all satellites working fine...
    I searched this forum and I fond one guy, who had exactly the same problem one year ago :
    -> http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=34383#M34 383
    But he didnt wrote, how to solve this problem...
    Thx for any help
    soul

    Hi Jason
    No, i saw this thread with the logitech webcam prob, but i have no logitech software installed, but yesterday i plugged out my headphones( they were connected to the Audigy-analog-inputs), and now it works fine again...
    I will wait a few days, maybe it turned back into this horrible situation
    bye
    soul

  • Soundblaster audigy player ret

    hello i got a audigy player retail sb0900 and when i go to the audighq and take i see sb audigy [D400] but i have installed my computer again and now i see sb audigy [FFE0] what can it be but i installed te drivers that came from my audigy card. and now i see that i am confused. i have never see that before never ever normaly when i reinstal my pc i don't have that problem

    The numbers and letters in brackets don't refer to the model of your card, so it's nothing to worry about. Those are related to the resources the card is using. It's not a problem, it's prefectly normal.
    Cat

  • Tecra A8-EZ8312 DVD Drive Replacement Compatability??

    Hi All..
    Working on a clients Tecra A8-EZ8312 to replace the dead DVD drive.
    For whatever reason Toshiba apparently is hardware specific?
    What's so special about the DVD Drives that the Bios wont recognize a basic DVD replacement Drive?
    Does anyone know what drives are compatable with the Tecra?
    Please don't answer with "Call Toshiba for a replacement drive".  There's a better answer out there.
    Anyone have experience with this?

    Tecra A8-EZ8312 (PTA83U-03202C)
    These two part numbers will for sure work.
       P000480110 & P000463850
    -Jerry

  • MSI-6580( 845 PE ) + Audigy Player-The End

    Sorry For My English
    I have mainboard MSI-845PE (MSI-6580)
    "My problem this Sound Blaster Audigy Player does not reproduce sound AC3 under Windows ME/XP/2000
    On different mainboard is OK! (gigabait,asus,abit,ecs)
    All is in system OK!
    Not conflicts!
    In playcenter it flies belt of reproduction but be not to hear sound.
    In Sourrond Mixer - AC3 is ON
    All Voices in mixer is ON
    All Audigy drivers and programs installed
    In BIOS - AC97 Audio is OFF"
    Problem is off ,i buy new motherboard Gigabite 845 (100euros), all is OK!!.
    Byebye MSI (no more mobo MSI , I was old fan mobo MSI ,
    I am disappointed )
    Intel Celeron 1.7GHz BOX
     :( MSI-845PE (MSI-6580 2.0) :(
     :D Gigabyte 845 :D
    MSI-8890 GForce MX4 /AGPx8/64MB DDR/TV OUT
    2 x DDR 256MB / 333MHz
    HDD WD Caviar 40GB / 7200
    CDROM Teac x40
    CD-RW Teac x24/x10/x40
    DVD Pioneer x16/x40
    FDD Teac 1.44MB
    Tuner Sat VisionPlus VP-1020
    Modem Zoltrix Spirit V90
    Sound Sound Blaster Audigy Player  
    Monitor AOC 17" Glr7
    Printer Epson SC 680 USB
    PicAsso - Poland

    :shocked:HI MAAAAAN
    MAKE SURE YOU HAVE THE RIGHT BIOS FOR THE RIGHT BOARD DOOD

  • Audigy Player and no Subwoofer for 5.1 So

    I use the Audigy Player with the newest updates. I have connected a Zalman 5. headphones ZM-RS6F on the SB-card. With sourround mixer and speaker and test only 5 speakers are tested without subwoofer. All speaker test for these 5 speakers are correct. But when I test with a test-DVD from www.dvd-discovery.de alle speakers are correct, but the subwoofer doesn't function.
    What must I configure for the subwoofer?

    I'm pretty sure the bass is just produced through the center channel. I have these headphones as well and I get the same thing, no sound for the Sub test. However if I listen to music with a lot of bass it comes out fine. Sounds awesome - great headphones... most of the time. I have some other quirks with them which I'm going to ask about somewhere else.
    - t00thPIKMessage Edited by t00thPIK on 04-28-2005 05:48 AM

  • SB Audigy 2 ZS and E-MU 1616M compatibility iss

    Hello,?I just purchased an E-MU 66M because I am fed up with the second rate recording features of my Audigy 2 ZS Platinum Pro. However, I still want to?use my Audigy because my XBox 360 is plugged into the breakout box and I bought some new 7. surround speakers today too. However, on installing my E-MU 66M I've come across a massi've compatibility error. Every time I install the drivers for one of the products, it installs them for the other product too. This is incredibly annoying, as it renders both of them unusable. My 66M is currently trying to run on Audigy 2 drivers (not going to happen) and having two different audio interfaces using the same driver causes CTHelper to crash and nothing works properly. I'm assuming this is because they are both Creative drivers and somewhere something is getting confused. Is there any workaround for this? I'm ****ed if I'm not using either of them, they cost me over ?400 combined. They both appear in Device Manager but I can't figure out a way of preventing this driver overlap from happening. Has anyone found a workaround for this? I'm using Vista with a fresh install of Daniel_k's drivers. Please assist, I'm at my wits' end!

    What is available right now besides the 'Audio Console' happiness, you'll find here:
    Start > Control Panel > Sound > Playback
    Start > Control Panel > Sound > Recording
    Select your options & preferences & 'Set Default' after checking availability, functionality & properties for the devices etc... Pray.
    Have Fun!

  • Audigy Gamer driver iss

    I cannot get the latest drivers for the Audigy Gamer (E400) to work correctly with my card no matter what I do. I'm running off a clean WinXP install with SP2. I installed AUD_EAX4DRV_0303.exe, then updated my AudioHQ, then installed AUD_WEBUP_PCWDRV_-84-40.exe. Upon installation I get sound, my mixer works, and AudioHQ works (EQ, ENV, FX presets all funciton). But when any game attempts to use EAX, I get no sound. If I alt-tab out of the game, and load AudioHQ, all of my ENV, EQ, and FX settings are blank. As soon as I exit the game, AudioHQ returns to normal and my sound returns. I've tried updating drivers every way possible, and nothing's changed. I have to use old drivers, and the old drivers produce very poor EAX effects, if any, but they are the only drivers that actually function fully.
    System Specs:
    MSI KT3 Ultra2 (Via KT333)
    AthlonXP 800+
    52 MB PC2700
    40 GB WD 7200RPM
    40 GB Maxtor 7200RPM
    Audigy Gamer (E400)
    MSI GeForce 3 Ti 200
    DirectX 9.0c
    Windows XP Professional w/SP2
    If there is anybody out there who has gotten this card to work correctly, i'd very much appreciate your guidance. The lack of driver support on this card is pathetic to say the least, and it does not give me any encouragement to ever purchase a Creative Labs card again. I know there are ways to use Audigy 2 drivers with this card, but i'd like to first hear if there are any real fixes for this card.
    Thanks for any help!

    Avenger55,
    The problem that you are dealing with here is that the original driver CD you have predates Windows XP. It is possible to get the CD install to work under XP by doing what we discussed earlier, however it appears there may be a third detail that is causing the trouble here. I noticed that you are running a VIA chipset, are you running the latest version of the Hyperion 4 in drivers? If not you should go to www.viaarena.com and get the update. The newest drivers should work with your system without trouble as long as the system is up to date.
    You might also consider ordering our latest install CD for the Audigy as it contains the latest drivers for the Audigy along with all of the updated software. You can order it from our Direct Sales department who can be contacted at -800-998-000 option #.
    Jeremy

  • Compatibility Between Audigy 2 Drive and Audigy 2 ZS GAMER C

    Greetings,
    I had a question about compatibility between an Audigy 2 Dri've and an Audigy 2 ZS Card.
    Specifically, the Sound Blaster Audigy 2 Platinum Sound Card and the Sound Blaster Audigy2 ZS GAMER Edition Sound Card (SB0350).
    Is the Audigy2 ZS GAMER Sound Card compatible with the Audigy 2 Platinum Dri've?
    If this particular question has already been addressed in another thread, my apologies.
    Thanks,
    Benwajones

    I searched (on "external" and "bay," but not "dri've" before I posted) but did not see this message. Is the reverse possible - that is a Audigy original dri've and an Audigy 2ZS sound card?

  • Audigy 4 Pro driver and MediaSource iss

    Just bought an Audigy 4 Pro card after getting seriously fed up with my old SBLi've 5. card, however I've got quite a few issues with it.
    I'm waiting on a response from Creative Support but figured I might check if anyone here can help.
    The bundled software with my card was the Audigy 2 ZS CD, and when I tried to install the drivers from that one it said it couldn't find an Audify 2 ZS card on my system and promptly quit.
    I tried a few ways to get around it but no luck, so eventually I downloaded the Audify 4 beta drivers (SBA4_BETADRV_US_2_05_0000.exe)from the Creative site.
    Those drivers installed and now my system show an Audigy 4 card installed with the following drivers: 5.2.3.00
    After installing the MediaSource from the Audigy 2 ZS CD I did not get any EAX control panel, Creative Mixer or Speaker setting though, so basically I'm stuck with nothing but my two front speakers making any sound at all.
    Creative MediaSource version: 2.02.06
    If anyone has a suggestion on how to solve this I'd be extremely grateful, because the current situation is quite annoying.

    The EAX Console, Speaker Settings and Mixer all came in the product CD. You must install them from the CD.

  • Digital output problem with new Audigy 2 driv

    I updated to the 02.08.0004 drivers today and everything seemed fine till after I calibrated my speakers within speaker settings. I have Z680s hooked up to a Audigy 2 PCI card using both digital out and analog. As with previous drivers I calibrated using 6 Channel direct input.
    Anyway, the problem is that when I use windows media player or any other media app, with the speakers set to Coax input (digital) I get the sound coming from the rear 2 speakers, instead of through the front 2 as it should. However, this only happens if I choose a speaker calibration under speaker settings.
    It's a bit annoying because I didn't have this problem before. Anyone else have this problem or a solution? Or is it a case of Rolling back to an old driver and hoping the problem doesn't stick?
    Thanks

    Anyone have any ideas?

Maybe you are looking for

  • I've downloaded an app. Will not open or show up anywhere.

    I've downloaded the Kreyos app. It does not show up. In the App store it show that I can "open" the app which does nothing. I've tried to sync with my map itunes. I know there are issues with the app at this time, but where is the app icon? 

  • SONY XDCAM LOG and TRANSFER CRASHING FCP

    I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin. the error message reads: The application Final Cut Pro quit unexpectedly after it was

  • No longer can use my account

    Hi, some weeks ago, my credit card provider informed me that several unusual transactions had been made in my account. As a result, they cancelled my old Visa which I used for auto recharge in the past. Despite deleting my credit card info and changi

  • RDR_FILE_SYSTEM Ksecdd.sys error BSOD

    After upgrading PC from Windows 8.1 then to 8.1 updated I receive a BSOD RDR_FILE_SYSTEM KSECDD.SYS only when I log onto Domain, I can Log onto the local PC OK and I can log on to the domain OK if I disconnect the network cable first, sign into domai

  • Import xml query

    hi gurus... what i m trying to 2 is to import a xml (query exported from production system) into test system, but this message is shown : bold Manually start the maintenance transaction for objects of type CWM Document bold has someone what the trans