Audigy Player + DTT3500 prob

Hi there
Since this week i got a problem with my Audigy Player.
Everytime i test my boxes with the Surround Mixer, i can hear the voice from the front boxes, but from the center and the rear boxes you can hear nothing...
It seems to be a software problem, because all satellites working fine...
I searched this forum and I fond one guy, who had exactly the same problem one year ago :
-> http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=34383#M34 383
But he didnt wrote, how to solve this problem...
Thx for any help
soul

Hi Jason
No, i saw this thread with the logitech webcam prob, but i have no logitech software installed, but yesterday i plugged out my headphones( they were connected to the Audigy-analog-inputs), and now it works fine again...
I will wait a few days, maybe it turned back into this horrible situation
bye
soul

Similar Messages

LED setup on DTT3500 with Audigy Player card

First off. I've connected my Audigy Player card to the control box of the DTT3500 speakers with a digital jack to DIN cable. I have the 9th light iluminated and the third. Is it okay to cycle through the different LED's, like when i want to play games and want to listen to music? Will i loose my digital output?
Second, i have lost my Audigy driver CD, so I don't have Audio HQ etc. installed on my PC. Is there anywhere i can download them?
Third, when i try to play DVD's in PowerDVD and set the sound output to Use SPDIF my input DIN light on the decoder starts flashing and i loose my sound. I can use it with 6 speakers/Dolby. What could be the problem here?
Oh - and if i can't get Audio HQ how should i setup CTpanel?
Message Edited by DildePer on 01-06-2005 12:38 PM
Message Edited by DildePer on 01-06-2005 12:39 PM
Message Edited by DildePer on 01-06-2005 04:23 PM

I had the audigy zs platinum pro & DTT3500 set (connected via digital din) LED's set to....
fourpoint/5.1 din & dolby digital DIN
with just those the center speaker didnt really work, but it was the best setup i found for music/games/dvd's etc - so pretty much I was only using them as 4.1's but found it fine.

Audigy Player Driver, or compat iss

hello,
im a little confused on what driver i need as theres no reference to the audigy-player in driver menu,
im running win XP - SP2, dx9+ what file do i need?
weird thing is i ((was)) using the card on a .7 ghz perfectly even under heavy load no clipping at all now i have transferd card to a xeon dual .7ghz (3.4ghz) over a gig of ram, again xp-sp2 now the same song arrangments that was perfect on a single .7 are clipping badly. even near complete songs that are not useing any MIDI devices (internal or external) are doing the same, i was wondering is this a windows driver/dx9 etc , issue or is there a problem running audigy player on a dual system.
the driver that i installed was an old update i downloaded sometime ago pre sp 2, hence the request for newer driver, games dvds mp3s are perfect, only under song production clipping happens, cubase, fruity, are suffering only..
thanks

cheers bad boy,
i do have the original cd and the free game to, l give your one a go to,
i tryed a audigy driver yesterday on install it says selected components are not installed, sound properties shows sb d400, all drivices/software shows audigy. searching d400 on driver page finds nothing.
ok i know the card is pretty old now but i do like it, creative stuff inc my old gf2 graphic card are solid and stable only time i ever had probs is when i update direct x normaly required to run new software it would be a shame to upgarde something i like because of XP
cheers once again badboy , il head for the download now ,,, fingers crossed its a gooden

Soundblaster audigy player ret

hello i got a audigy player retail sb0900 and when i go to the audighq and take i see sb audigy [D400] but i have installed my computer again and now i see sb audigy [FFE0] what can it be but i installed te drivers that came from my audigy card. and now i see that i am confused. i have never see that before never ever normaly when i reinstal my pc i don't have that problem

The numbers and letters in brackets don't refer to the model of your card, so it's nothing to worry about. Those are related to the resources the card is using. It's not a problem, it's prefectly normal.
Cat

MSI-6580( 845 PE ) + Audigy Player-The End

Sorry For My English
I have mainboard MSI-845PE (MSI-6580)
"My problem this Sound Blaster Audigy Player does not reproduce sound AC3 under Windows ME/XP/2000
On different mainboard is OK! (gigabait,asus,abit,ecs)
All is in system OK!
Not conflicts!
In playcenter it flies belt of reproduction but be not to hear sound.
In Sourrond Mixer - AC3 is ON
All Voices in mixer is ON
All Audigy drivers and programs installed
In BIOS - AC97 Audio is OFF"
Problem is off ,i buy new motherboard Gigabite 845 (100euros), all is OK!!.
Byebye MSI (no more mobo MSI , I was old fan mobo MSI ,
I am disappointed )
Intel Celeron 1.7GHz BOX
:( MSI-845PE (MSI-6580 2.0) :(
:D Gigabyte 845 :D
MSI-8890 GForce MX4 /AGPx8/64MB DDR/TV OUT
2 x DDR 256MB / 333MHz
HDD WD Caviar 40GB / 7200
CDROM Teac x40
CD-RW Teac x24/x10/x40
DVD Pioneer x16/x40
FDD Teac 1.44MB
Tuner Sat VisionPlus VP-1020
Modem Zoltrix Spirit V90
Sound Sound Blaster Audigy Player
Monitor AOC 17" Glr7
Printer Epson SC 680 USB
PicAsso - Poland

:shocked:HI MAAAAAN
MAKE SURE YOU HAVE THE RIGHT BIOS FOR THE RIGHT BOARD DOOD

Audigy Player and no Subwoofer for 5.1 So

I use the Audigy Player with the newest updates. I have connected a Zalman 5. headphones ZM-RS6F on the SB-card. With sourround mixer and speaker and test only 5 speakers are tested without subwoofer. All speaker test for these 5 speakers are correct. But when I test with a test-DVD from www.dvd-discovery.de alle speakers are correct, but the subwoofer doesn't function.
What must I configure for the subwoofer?

I'm pretty sure the bass is just produced through the center channel. I have these headphones as well and I get the same thing, no sound for the Sub test. However if I listen to music with a lot of bass it comes out fine. Sounds awesome - great headphones... most of the time. I have some other quirks with them which I'm going to ask about somewhere else.
- t00thPIKMessage Edited by t00thPIK on 04-28-2005 05:48 AM

Audigy 4 + DTT3500 doubts about how to conn

I have an Audigy 4 and an old DTT3500 Digital 5. (old but still very good, no reason to buy a new set, is also a Dolby Digital decoder). The DTT3500 accepts optical, coax, digital din and as 'line in' only front and rear (no center).
Ok, so previously I had a Audigy (and Audigy 2) and I both connected those using the digital din. With this, I got full 5. surround in games and when playing DVD the digital sound was send through the decoder and got decoded by the amplifier.
Now with the Audigy 4 I am confused. I have bought a new product but it seems I have _LESS_ features? As I understand it I have to connect the analog out's of my Audigy 4 to my DTT3500 for games (and miss the center channel because my DTT3500 doesn't have an analag-in for center). I also have to connect the digital out to my DTT3500 in case I want to play a DVD movie and use the DTT3500 decoder to get full 5. DVD sound.
It seems there is no way anymore that I can have 5. sound in games? So, I'm wondering if there is a way that I can make my own 'custom cable' which has a digital din on one end (for in my DTT3500) and at the other end is a combination of different outputs of the Audigy4. Is that possible?
Also, I don't like that now when I have to switch between headphone and speakers I have to unplug the front DTT3500 plug and switch it with my headphones. I very often change between headphones and speakers (for online gaming matches I use headphones, also at night, but for the rest I use my speakers).
Any advice for the most elegant solution? Or I'll just have to li've with it ... maybe switch my Audigy 4 back for an Audigy 2 (which is in an older computer that I still have).

dchandresh wrote:
yes it is Audigy 4 pro.and i want to buy that yamaha receiver for connecting it to NS P00.i want to connet through SPDIF on soundcard (there are 3). So i want to know is it compitable with the yanaha RXV 357.
thanks
It seems, you can connect Audigy 4 Pro to RXV least through coaxial.
You can download the manual for RXV-357 from Yamaha.
Here is also a picture of connectivity.
jutapa

Sound Blaster Audigy SE Driver Prob

I have a problem with Sound Blaster Audigy SE,
Im using newest from creative download site SBA_PCDRV_LB__04_006.exe drivers.
After I turn on a game like ut2004, fear combat, even dxdiag (sound test) or pause sound in music/movie player system stops reacting or process "System" uses 95-00% of my CPU.
After few tests I discovered with help of KrView (kernel view soft) that p7filt.sys uses such big ammount of cpu If in Speaker Settings, Bass Redirection and Subwoofer Gain (+5) is turned on. (5. speakers)
I installed a bit diffrent version of drivers (from cd and even later I tested SBSE7_XP_Jul2005 additional driver). But then Subwoofer Gain option isnt working at all
its written Subwoofer Gain (+0) and with sub gain +0 sound quality very poor like in AC97 audio.
Ive also checked friends sound card on my pc and also i've tested exactly same thing on other computer.
I have xp sp2 with updates, newest bios, directX, etc etc...
Pentium 4 2.4
MSI 845PE Max
Geforce 6600GT
536 DDR Ram
Windows XP SP2Message Edited by Efrin on 04-09-2007:38 AM

OK..first of all the Audigy SE lacks any form of hardware acceleration, so turning on features like bass boosting/sound post-processing etc. will take away a lot of CPU time. The file you mentioned just acts as a software real-time filter, although it should not go up to the point of bringing a 2.4 Ghz Pentium 4 to its knees.
The sound quality will be altered even with every "DSP" effect (quoted because there's no actual hardware DSP, it's just emulated in software) set to 0, as long as the "DSP is considered acti've.
That's because the sound output is first converted from the time domain to the frequency domain (in poor words, the continuous sound wave you hear is broken down in many different frequencies like in those 80s ghettoblasters spectrum analyzers) because it's easier to amplify bass/treble that way, and then converted back to time domain (in even poorer words, a continuous sound wave you can hear/record/playback).
It's obvious that doing that thing in real time has a CPU cost, and even more obvious that the procedure is lossy and the input will not be the same as the output even with no effect applied, as long as the this double conversion takes place.
If you really need bass boost, turn any sound processing on the card OFF, and use speakers which have it. Also, if the CPU usage is abnormally high, try updated or a specific older version of the drivers that has more reasonable CPU usage/doesn't have that bug.

Mediasource Dvd Audio Player Installation Prob

I couldn't install the software called "Mediasource Dvd Audio Player."As soon as I run the software,there is a message saying "Mediasource Dvd Audio Player unable to find compatible navigator" and software not be able to started. I have already update the driver package of Sb Audigy 2 ZS.What does that mean "compatible navigator"I tried to reinstall software 5 times.What do I have to do?
(OS : Win98se\DVD-Rom : Hitachi GD5000\ Megaworks 550 5.)
Regards

Hi,
I did perform clean sweep,tried latest updates,etc.Spent lot's of time.
Customer support told me :
"I am sorry to inform you that you are only able to install the MediaSource DVD Audio Player in Windows 2000 or Windows XP"
I have formatted my hard disk and it is running in Windows 98 SE?

Itunes player balance prob

my player is playin everythin i have on it off left of centre, yet my system sounds r fine.
plz email me wid help, as i dont have time te scan here. tyvm in advance.
[email protected]

try logging into itunes web site, look for the upgrade, right click the icon exe, save target to disk, close all apps, dbl clk the saved file,( you might get an error), itunes must not be running, task mgr would be able to close all itunes executables, then the program should run, try this but no guarantees.

Sound Blaster Audigy 2 Recording Prob

I recently re-installed my audigy, and for some reason I cannot get any sound when I plug my guitar into the Line-In on the front. I check the recording/playback setting, and everything seems to be ok. I'm wondering if it might be a problem with the hardware. Any thoughts?

Dee,
If the card came supplied with the PC, then you may need to contact Dell to get specific drivers or applications for it.
Is the card working correctly now? Is it listed in Device Manager, with no error messages? What did you use to reinstall, was it a CD, or a driver? If it was just a basic driver pack, then it's likely that doesn't include any extra applications.
Cat

Audigy 2 driver prob

Got this huge problem with the drivers for my audigy 2 card. Just formatted my dri've, clean WinXP install and threw in the latest drivers from this page (includes creative audio console). My problem, I get seriously crappy sound from my center speaker (really low, cant hear voices in movies), and neither can I install the surround mixer, EAX console or the Speaker setting program (which I wanna use to see if my fronter is working allright). I've had lots of trouble with the drivers before (subwoofer not sounding when I config my speakers, drivers just stopped working twice etc etc). I've run the automatic update tool here and it doesnt do me any good. Starting to piss me off, cant install the **bleep** tools, it says "Setup did not detect the required components." when I start the installer, and in that crappy "Audio Console" I cant do anything... Before when I was using Win2k (way better than xp, btw) I had this nice tool (blue window, could manage everything, surround mixer, speaker settings etc), the Audio Console just isnt ANYTHING like it. Using a set of Logitech Z-5300 if thats of any importance ... But even if its my speakers that are faulty, I should at least be able to install the tools to check! I've reinstalled the card several times, no luckMessage Edited by Wortex on 2-02-200606:48 PM
Message Edited by Wortex on 2-02-200606:49 PM

You need to install all software from Creative CD, bundled w/ your card.
If you don't have the CD, check, if BadBoy has this CD in his collection - http://badboy.filefront.com/
jutapa

Audigy Player: Strange problem w/ internal inp

Hello everybody!
Since I'm running WinXP Pro I've encountered a really strange problem with my internal inputs. I have a DVB-s card connected and cannot hear any sound. Currently I have to use the external output of the DVB-card and the external Line In of the Audigy - quite sloppy! The thing is, all worked fine using Win98. And - I can record sound from DVB but not listen to it simultaneously! This works (...) for all internal inputs, ie. CD, TAD, etc. I tried almost every driver I could get my hands on, but it didn't help.
Any help would be appreciated.
Greetings from Germany,
Lasse

Hello!!!!
I have the Ms-8348a ......is not big diference between them i think....for the beginig you need to know that this drive is the pourest cd-rom i ever see........The read of the cd's is the badest thing at this unit.......I recomend you to buy a separate cd-rom like Asus,Pioneer,Lg anyway one of the brands and no SONY (is not so good)......With the burning you will not have big problems it will work almost with all cd-blank brands....but with the reading of these cd's is other problem.....you will want to use this unit only for writting not for reading.....If you have WinXP you will have a problem with this unit with a limit speed of writing at 16x.....read my detailed post 'MS-8348a problems and SOLUTION!!!!'.......Here is the link with the latest firmware for the (MAKE SURE IS THE 'A' VERSION BEFORE FLASHING!!!!!!).........http://www.cdfreaks.com/drive/firmware/799...hope it help

Audigy 4 mic prob

I cannot get my Sennheiser PC50 mic to work with my audigy 4 sound card in games like CS: Source. No matter what plug I put the mic into it does not work with CS. I can record things in the the EAX console if I use line-in /MIC plug and I have to turn up the volume on the mic with the knob on the right side of the I/O hub. But cannot get it work in games. Anyone know what to do? This is driving me crazy because now I have an expensi've sound card that will not let me do simple things that onboard sound will let me do without any effort.

I beli've you mean this from Steampowerd.
Jason

Sb audigy 2 value prob

Im having trouble installing the software for this soundcard. Ive downloaded all the new software available but i get the same error when trying to install. "Setup could not detect any sound blaster audigy 2 on your system", however my system detects an audio device. How do i go about correcting this?

jt wrote:
I purchased it OEM so i dont even have the cd ...i just downloaded whatever was listed.
Could you explain what you mean by you purchased it OEM?
Did it come with another computer or you bought it pre-owned from someone else's branded PC?

Audigy Player + DTT3500 prob

Similar Messages

Maybe you are looking for