Audigy recognized as "multimedia audio device
System specs:
Msi k8t800 Neo-fsi2r
amd 64 3k+
nv 6800oc
gig ocz 3200
I also have a 3com nic card which is tested working fine
and... my soundblaster audigy gamer.
The card worked fine before, my mother board went sour so I bought another and now the card will not install. Windows detects it as a multimedia audio device with no other specific label. Windows also does not install the drivers, when I attempt to install automatically it does not find any compatible drivers.. I have attemped the drivers from the site. My card is retail. Does the ac97 onboard 5. conflict with these cards somehow? I would just use that but its garbage and doesn't work even half way. I have also tried other pci slots, nothing..
Note: When I got my new motherboard the nvram was not detecting, still isn't. May just be the battery but would this cause any problems with my card not being recognized?...
Enfurno
I have the same problem.
K8N Neo Platinum
Athlon64 3000+
52 Kingston DDR400
Soundblaster Audigy Platinum eX
I have disabled the AC97 Onboard Audio in the BIOS. I have tried all the remaining PCI slots on my MB. I keep getting the generic "multimedia audio device" and "PCI input device" notifications when I reboot. I have tried completely uninstalling all audio drivers.
When I try to install SBA2_EAX4DRV_0303 I get the following message:
"Setup could not detect any Sound Blaster Audigy 2 on your system.
Please ensure that your Sound Blaster hardware is properly
installed before running this Setup program.
Setup will now exit."
Could there be a problem with the onboard ID on the audio card itself? Is there any way to test for and/or remedy this?
Thanks in advance for any help... I've been messing with this for too long with no answers
-long time Creative customer losing faith.
Similar Messages
-
USB Audio Device Not Recognized by Stream 7 tablet
Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into. Why it is not recognized as an audio playback device is beyond me. I've tried all of the suggestions that I've been able to find on the net without any luck. Is therte some reason why this function has been disabled on the Strwea 7?
This question was solved.
View Solution.Problem Solved!
It turned out to be a combination of the usb cable and the OTG USB hub. On my desktop the iBaso was cable specific as to the device being recognized. When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual. But when I tried the cheap monoprice adapter it worked.
The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
The OTG hub works with a mouse and a mSata drive perfectly but not with the iBAso DAC.
Thanks to everyone who replied for keeping me trying. -
Win XP finds no audio device after installing Audigy 2
After installing Audigy 2 ZS, my Windows XP could no longer identify an audio device. Under Control Panel > Sounds and Audio Devices, clicking on the Audio tab, there is no Default Device for playback or whatsoever.
However, under the Hardware tab, Audigy 2 ZS is visible and seems to work fine. The only suspicious part I caught is that when I check for Properties of Audigy 2 ZS and go down to check Properties of Creative Audigy Audio Processor (WDM), the status shows "The di'ver is enabled but has not been started." I have no idea how this can be fixed.
The integrated sound card is turned off in the BIOS.
I've tried all possible ways to install, uninstall, install..., but just couldn't get XP to work properly. Any other possible solutions out there?
Many thanks!Solved after reinstalling Win XP. Wasted too much time on trying other possible solutions.
Hope other people may learn something out of it. -
Audigy 2 ZS and Realtek HD Audio device conflic
I just installed?an Audigy 2 ZS Sound Card into my computer and I would like to know if there would be any conflicts?between the Realtek HD Audio device that I also have installed in my computer. Should I unistall or disable the Realtek Audio Device or can my computer function normally with both devices? I?use Windows XP
jules96 wrote:
I just installed an Audigy 2 ZS Sound Card into my computer and I would like to know if there would be any conflicts between the Realtek HD Audio device that I also have installed in my computer. Should I unistall or disable the Realtek Audio Device or can my computer function normally with both devices? I use Windows XP
If you don't get any issues with that combination then why to disable.
jutapa -
Smart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"
LSmart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"nI've got Windows 7 Ultimate 64 bit and a Creative Audigy 2 ZS. They've worked fine together, but I recently tried to install the programs that come on the CD and I can't get Smart Recorder to work.
It has a message saying "There is no audio device available on the system. The application will now close."? I checked my control panel and it definitely shows a my Audigy 2.
I found an old post that suggested using the CTZAPXX.EXE on the CD, but it didn't do anything. I watched the CPU go to 50% usage, but nothing happened for minutes. (http://forums.creative.com/t5/Sound-Blaster/Speaker-settings/m-p/40229)
How can I fix this problem with Smart Recorder?
Thanks,
MikeIs it time to upgrade to X-Fi or another brand?
-
Audigy , Sound and Audio Devices Properties 'No Audio Device' appears
<p class="MsoNormal">Out of the blue, in the Sound and Audio Devices Properties, on the Volume tab ?No Audio Device? appears.
On the Sound tab of Sound and Audio Devices Properties, my Default Device says ?Modem # Line play back and is my only drop down choice. I made no configuration changes or installed any new software, it just stopped working.
I have searched for solutions, to no avail. I have an ?!? next to the Microsoft Kernel Audio Mixer in Device Manager that upon re-install displays a message that there was a problem installing this hardware(MEDIA) I/O operation has been aborted because of either a threadd exit or an application request(both installing from driver folder and recovery CD).
I don?t particularly care what sound device I have, just one that works again. I?ve uninstalled the sound devices and let them re-install on reboot and have checked the BIO settings (I don?t have any sound related settings there).
In Admin Tools > Services ?Windows Audio? is started and set to Automatic. When I manually try to play a windows sound in the Sounds tab I get an error message that says my sound card may be in use.
Under Sound and Audio Devices in Device Manager I currently have(when I ?Show Hidden?):
-Audio codecs
-Legacy Audio Drivers
-Legacy Video Capture Devices
-Media Control Devices
-Video codecs
Don't know what else to try. Any help would be appreciated.cesario85 wrote:
OK The sticky label says SB0240
Here's the screenshot:
[img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
Audigy shares IRQ with IDE controller and firewire controller. This is not good.
NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
NOTE: You may need to reinstall OS to get this done.
Also you may need to enable APIC mode on BIOS.
How To:
A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
.jtpMessage Edited by jutapa on 09--2005 0:23 PM -
Audigy 2ZS: "No Audio Device&qu
Some of the time, I get sound perfectly fine. At seemingly random times, however, I lose sound completely in most programs. The only place I can hear sound is using Winamp and the DirectSound mixer.
When I go to the sound control panel in Windows, it says "no audio device" and most options are greyed out. My sound card device is still listed in the hardware manager, however, and the drivers are updated and listed as running fine.
If I restart my computer, I get sound again until it randomly goes silent.
Here are my system specs:
Windows XP SP2 Media Center edition
Audigy 2 ZS
DFI Lanparty motherboard
AMD 3200+ dual core
ATI Radeon x950 ProMessage Edited by creiner on 0-2-200703:25 PM
Message Edited by creiner on 0-2-200703:26 PMMy wife has the same issue.
Might be related to the new install of a Logitech Quickcam Pro 500, or games download from "Real Arcade" service.
randomly, sound from certain applications goes dead.
PC is winXP SP 2
dxdiag (direct x is 9.0c) sound testing fails - you hear no sound, and the dxdiag then shows an error message.
In addition, some SB audigy applications now show certain sound devices missing.
Still trying to get to the bottom of this, will post details. -
Mini and osx no longer recognizing firewire audio device
i have an m-audio firewire solo hooked up to my mini, which is just a simple firewire instrument interface. i went to bed last night and everything was working fine. woke up this morning and the sounds is now coming from the internal speak, not my stereo. nothing is wrong with the firewire port because its still lighting up and running, but osx is telling me there is no m-audio device connected to the computer. i tried to reinstall the software but that did nothing. should i try to completely uninstalling the software and then reinstall? i also installed m-audios upgrade about a week ago but had no problems up until now. if none of this works, should i strat wondering about a potential virus and possibly formating the hard drive?
any help is certainly appreciatedI have a similar device. A fresh install of the device may help.
For my device the manual says to turn off all power saving settings. Do not let the computer go to sleep, not the screen, not the hard disc, not anything.
That is probobly unrelated to the computer not recognising it.
It's not a virus.
Make another user account in the System Preferences. Log out of your account and into the newly created one. Does it work?
If you still have no luck, run the apple hardware test with the discs that came with the computer. A simple search can tell you how to do it. -
Multimedia Audio Controller Er
For some reason after I formatted my hard dri've, the sound card isn't recognized. There is no little speaker in the system tray and no sound options at all. I don't have the driver cd. The model number is sb0220. It is a Sound Blaster Li've 5. Digital. What do i do to get rid of the error and have sound? Thank you.
I realize that this is an old post but hopefully someone can point me in the right direction... I was trying to clean up my add/remove programs and i had meant to hit the one above but some how i got rid of the Multimedia Audio Controller ... I have SoundBlaster Audigy 2. this card was installed because the computer had come with a sound card built in on the motherboard and kid broke off the end of the plug in the headset/speaker thingie.
I cannot find my disks (we moved since I instlaled and cant find a blessed thing). How do I get this device working again... Right now its showing up under other devices with big ? ... says Multimedia Audio Controller.
On my add/remove list it shows the CREATIVE MEDIASOURCE (which was RIGHT below the accidentally removed item) and then much further down I see that SOUND BLASET AUDIGY 2 is still installled. In my Device Manager I have listed the following (Somebelong to that sound card on the motherboard I am sure)
Audio Codecs
Intel(r)8280BA/BAM AC97 Controller
Legacy Audio Drivers
Legacy Videio Capture Devces
Media Control Devices
Unimodem Half-Duplex Audio Device
Video Codec
PLEASE tell me how to get this Multimedia Audio Controller reinstalled so I can again use my SB Audigy 2 card (since I cant use the other with that darn plug stuck inside). I have tried to upgrade the SB Audigy 2 drivers but that didnt seem to work.
I would be most grateful to whomever may be able to help me with this problem!
Susan Pomeroy -
"No audio device" in Windows 7 !
+ ?
Well, I use winXP-Pro in dual-boot with Win7-Build 700, both 32bits, and I get an Audigy SE that works great in XP.
Although, in Win 7? there?s no sound device, "No audio devices are installed" error, and no-sound icons in Device Manager.
Tried?the lastest ?"Win 7" drivers from www.soundblaster.com, but none find the Audigy.
How can I fix this ?/Re: "No audio device" in Windows 7 !? If you haven't give this a try,
http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-0-07-3-2009-AudigySE-Value-LS/td-p/53329
If that still doesn't work try to manually force the driver. This will only work (and not always) if the card is at least showing up in Device Manager; either by name, or as "unknown multimedia controller". First extract the above downloaded file, then open Device Manager and locate the card.
-right click on select update driver
-then select "browse my computer"
-next select "let me pick"
-next click on "have disk", then click on Browse and navigate to the "Drivers\vista" (or possibly Win7, not sure on this as I don't have the file) and point it to the P7. INF file.
that should get the driver to install. If it does then you should be able to re-run the above and get whatever apps from it you want installed. -
Help With Multimedia Audio Controller Driver For XP Pro
Hello,
Please help!!!
I am trying to locate the Multimedia Audio Controller Driver for XP Pro for an MSI 645 ULTRA (A6547MS) Motherboard. The audio device is integrated into the motherboard and Windows XP Pro is not recognizing the device.
I have tried looking at MSI Support Website but am unable to identify which is the correct driver package to use.
I would also like to know if there are any related WinXP Supplement driver package needed for this motherboard.Did you do a clean installation of XP or you only use the upgrade function?
I recommend you to do clean installation if you didn't. -
Hi,
I have a Windows XP SP3(32Bit) installed on a Desktop Computer with a PIII processor, and 512MB of RAM.
My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter installed. As a result, I would not be able to run the Intel Audio Card Reader a web-based applet that identifies my Audio Card and finds the latest audio
driver for my Audio adapter.
I have Multimedia Audio contrlloler driver installed improperly since an exclamation mark is shown in front of it in the device manager.
This is Hardware ID (PCI\VEN_8086&DEV_24D5&SUBSYS_97611849&REV_02).
I have tried to download the driver from
here:
However, I don't know which one of them I should download since there are
quite a lot of them, and there aren't classified as to 32-Bit, and 64-Bit versions of Windows Systems.
Thus, could you please help me to decied which one I could choose.
A man should convert his anger and sadness into strength to continue living in this life.Hi,
It seems to be a soundMAX card in which case this file should work for you - http://www.mediafire.com/download/lo5nyw2utm2/SoundMAX_Audio_V510X6480_XP.zip
** Note, this file has not been tested by me personally - Please ensure you scan with AV post and prior extracting the ZIP, If it does not look right, do not install **
Its next to impossible to find vendor sites with the original drivers for this age of hardware.
Regards,
M
If you find my information useful, please rate it. :-)
Thanks a lot,
Martin G. Evans.
According to the screen shots above, the Hardware ID is: PCI\VEN_8086&DEV_24D5..
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
I WAS EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, NEITHER YOU, NOE ME FOUND THE APPROPRIATE DRIVER.
I don't think that driver given is the appropriate driver since
I have tried downloading, and installing a soundMAX card driver. However, I found these things:
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio is installed well. As here:
The motherboard model is:
Belarc Advisor Computer Profile:
Operating System System Model
Windows XP Professional Service Pack 3 (build 2600)
Install Language: English (United States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16 ص
Boot Mode: BIOS (Secure Boot not supported) Enclosure Type: Desktop
Processor a Main Circuit Board b
3.00 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Hyper-threaded (2 total) Board: 775i65G.
Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00 03/20/2007
Drives Memory Modules c,d
39.99 Gigabytes Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive 0, rev 05.03E05, SMART Status: Healthy 504 Megabytes Usable Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) * 20.98 GB 14.16 GB free
d: (NTFS on drive 0) 19.01 GB 15.33 GB free
* Operating System is installed on c:
Network Drives
None discovered
Users (mouse over user name for details) Printers
local user accounts last logon
عايض لرضي 19/01/2015 10:59:17 م (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None discovered
Controllers Display
Standard floppy disk controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] None discovered
Bus Adapters Multimedia
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller - 24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD None discovered
Virus Protection [Back to Top] Group Policies
Norton AntiVirus Version 18.1.0.37
Virus Definitions Version Not Up To Date
Realtime File Scanning On
None discovered
Communications Other Devices
↓ Realtek RTL8139 Family PCI Fast Ethernet NIC
Status: Cable unplugged
Dhcp Server: none responded
Physical Address: 00:19:66:1F:F7:54
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days (mouse over last used for details) Hosted Virtual Machines (mouse over name for details)
Last Used
SanDisk Cruzer Blade, s/n 4C532000020502112303, rev 2.01 19/01/2015 09:32:57 م*
USB 2.0 USB Flash Drive, s/n 59309e92e21612, rev 0.00 09/01/2015 12:29:17 ص*
* Possibly used again before the reboot following this time. None discovered
See your entire network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life. -
How do I use 2 Core Audio devices at the same time in Logic w/out switching
Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
[email protected]THanks everyone! awsome article! Thanks for posting it, nh!
The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
This is the website where I purchased my audio driver :
http://www.usb-audio.com/
A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM Mac OS X (10.4.7)
Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM Mac OS X (10.4) -
MY "No Audio device detected" Solut
Before I begin, I would like to say if this doesn't help you out I am sorry. My goal is for this method to at least help out one person, if so I would feel content in passing on what had worked for me to this community. I would like to also mention my card worked fine on my Win XP setup but after i switched back to XP i started getting errors such as "...audio device supported not detected..." whenever i would try to use the mediasource applications or even do the driver update for my Audigy 2 ZS card. Here is the method that finally worked for me, because there is no way i was going to go through the minatinous job of having to test different pci slots to get this card to work.
. I did a cleansweep of my audio drivers, directions for different operating systems can be found at this url ( http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english,Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},VARSET=ws:http://us.creative.com,case=72 ) once you reboot your system after the end of the cleansweep it will locate your card automatically ignore the found new hardware prompts pertaining to your soundcard by pressing cancel on it (or them if you have more than one prompt) and go on to step 2.
2. After that i did a normal cd installation for my audigy 2 zs card installing both regular drivers and the mediasource applications (just to make sure). After the installation finalized I was asked to reboot again which should be done at this point.
3. Once windows loaded back up It located my soundcard and I was presented with the "Found New Hardware" prompts again. At this time for each prompt that came up I picked that I wanted to choose where to find the correct files which i believe is the Recommended choice by Windows which was one of two choices in this area. From there it takes you to another screen where there are checkboxes to choose where you want windows to search for the correct file(s). I chose for both of my found new hardware prompts (if you have more than one, they will show after you finish off the the first one...meaning you will do this procedure more than one time because they will only come up one at a time) for it to search my CD Dri've which still had my creative disc in it so it could search the CD for the correct files (and it should find them).
Then
I proceeded to do a manual install of the drivers as well (yes im installing over an installation, it sounds stupid i know..but it worked for me) by exploring the CD and running the program located in the Audio/Drivers folder called CTZAPXX.exe (CDDRIVE:\Audio\Drivers\CTZAPXX.exe). Make sure the Update Option selected is Driver Installation and the Driver Type is WDM Drivers and also i checked "Overwrite existing shared Creative audio driver files". Then just click OK and click through any warnings that may come up telling the program you want to proceed still. Once that is done it will ask you to reboot again, at this time you may do so.
4. After Windows loads up this time i have my driver update ready which is located here ( http://us.creative.com/support/downloads/ ) according to card type and operating system (since peoples configurations differ this is something that will have to be searched for independently). Normally when i would just click this file to update my drivers it would unpack and then give me the infamous "...audio device supported not detected..." error but after those steps i took, it actually worked for me and went into the installation. Then i believe it asks for another reboot i might be mistaken but after that good sign of it actually installing all my applications work without a problem now; and everything seems perfectly fine for the time being
Sorry for being long winded, but again if you are a person stuck in this rut or just now have encountered this problem and have tried almost everything, this could be worth a try. I am running win 2000 so there might be some discepancy but you never know until you try. If this doesnt help you all good luck in continuing to find answers hopefully something will come along.<div class="lia">ReCogNeYez,<div class="lia">Might be a little late, but this worked perfectly for me. You can now?rest safe in the knowledge that your advice has helped someone out. Now I can finally get back to watching Red Dwarf : )<div class="lia">Cheers mate!<div class="lia">George
-
Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
<sup>a</sup>
Main Circuit Board
<sup>b</sup>
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
<sup>c,d</sup>
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
<small>(mouse over user name for details)</small>
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection <small>[Back to Top]</small>
Group
Policies
Norton AntiVirus Version 18.1.0.37
Virus Definitions Version Not Up To Date
Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days<small>(mouse
over last used for details)</small>
Hosted Virtual Machines<small> (mouse over
name for details)</small>
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse
Maybe you are looking for
-
Macbook late 2008 13" RAM upgrade?
So I have this old Macbook from 2008 called "Macbook Ultimo 2008". The Macbook is not a pro model and the only aluminium from 2008. Here's a guide on how to upgrade the RAM on my Mac from Apple: http://support.apple.com/kb/HT1651#link2 . Officially t
-
Sharepoint Workflow - change URL Path for inside and mobile device email access
I have a workflow that work perfect when accessing from a desktop. An email is sent with a link to the item, [%Workflow Context:Current Item URL%]. The real address is http://sql/layouts/....... When the user tries to click on the link in the email
-
I selected iTunes as default player and now I can't hear anything playing
I've tried everything in the help menu and just can't get anything to re-set so that I can hear what it is that I am choosing to play. This is really frustrating. I would go back to Musicmatch, it seems like when I selected iTunes as the default play
-
How to Implement WSRM with OSB11g
Hi All, I have the below requirement. I want to built a WSDL based Webservice using OSB11g features. I need to implement WS-ReliableMessaging into it. So that when Client invokes the Webservice, the messages can be transferred between client & sever
-
Glossary missing in RoboHelp 7 output
I created and generated a glossary in RoboHelp 7 (Webhelp). When viewing the results, the Glossary tab displayed, but there are no entries listed in the glossary. Any ideas why the entries aren't displaying? Thank you!