Audigy SB0090 Original Installation

Where can I get such CD? I bought the card at a flea market, for $0, and the drivers on the Creative website are kind of sucky. I have tried to use the CD's probided by Badboy, but everytime I dowload the cd, it tells me that there is a CRC error on the ISO file when unzipping it. Any other suggestions or anyone that would be kind as to upload their cd, and I can get a copy of it's?Thank you. Stuserver

musicman53 wrote:
"it says "SB Audig Audio[A000]", this is in control panel (sound and audio devices) also. even in winamp."
That's what it is supposed to say.
Same on mine as well and everything here works ok.
What do you expect it to say?
If it's installed correctly, device manager should ID the card as Creative SB Audigy 2 ZS (WDM). If you have other listing like SB Audig Audio then it's most probably using Windows nati've driver and not Creative driver. I bet your other Creative application cannot be launch and would tell you that cannot detect the correct hardware and similar stuff.

Similar Messages

Is it possible to upgrade on a new HD without original installation disk?

My situation is a little complicated.
I've had my MacBook Pro for almost three years. For the past few months, I've been having some problems with a very loud droning, buzzing sound coming from the lower-right quadrant. I can only use my computer for a few hours to watch or edit videos before it starts making this noise and I have to shut it down. I posted about this a couple times before and the only response I got was that my hard drive probably needs to be replaced. So since I, nor anyone else, seems to know what the problem is, I'm probably just going to do that. This is where it gets complicated.
My original installation disk for Tiger is, presumably, at my parents' house 1500 miles away, if it still exists at all. I want to upgrade to Leopard anyways (so I can play Sims 3), but I think that it's pretty much impossible without the original disk for Tiger. I figured I would need to use my Tiger disk to set up the new hard drive, and then upgrade to Leopard straight away. Is there any possible way to install Leopard on a new hard drive without having to buy the full system (not just the upgrade)? I was thinking I could call Apple and beg and plead for a replacement Tiger disk, but I would probably just be wasting my time.
I'm starting to think that my situation here really is hopeless and my computer will never be able to be useful to me again.
Any help would be greatly appreciated.

Thank you for the speedy reply. That looks like just what I was looking for. I'm going to go buy that right now and I hope this is the end of my searching for a solution. Thanks so much.
I have one question though (it may be stupid, but I'm not very literate on Macs): will the program back up my whole operating system or just my files? Like, will I be able to install the OS from the backup?
Message was edited by: yosly

HT1553 DO I HAVE TO HAVE THE ORIGINAL INSTALLATION DISCS IF MY HARD DRIVE IS REPLACED BUT I MADE A BACK UP WITH TIME MACHINE TO AN EXTERNAL HARD DRIVE ?

I have an imac from late 2009 and received an email saying the seagate hard drive may fail and apple is going to replace it free of charge. I will back up using time machine to an external hard drive but do I absolutely have to have the original installation CD's or is there a way around this to restore the computer once they replace the hard drive??

Yes, you can partition your 2TB drive that way. In fact, I have an external hard drive with 3 partitions: one for a SuperDuper! clone of my Snow Leopard partition, one to clone my Lion partition, and one larger partition for Time Machine (which only backs up the Lion partition).
I would expect the authorized reseller to have a complete set of OS X disks.

How to downgrade from OSX 10.8.5 to Snow Leopard, on an Early 2011 MacBook Pro, without the original installer disk?

Hello! So here are the specs.
I have an Early 2011 MacBook Pro, which came with OSX 10.6.6 by default.
I've lost my installer disk so I though I'd buy a retail one from the online Apple Store, and version 10.6.3 is what they sent me.
Simply running the install OSX app won't work, I get a msg saying:
-- You can't use this version of the application "Install Mac OS X" with this version of OS X. You have "Install Mac OS X" 23.1.1. --
So, I've tried booting from the new disk hoping to erase my current drive and install Snow Leopard, but no can do, I get 3 beeps and have to force shutdown (not RAM related, see below). Laptop works fine when I spare it this maneuver.
After some research I understand 2 things:
1. Only the original installer disk will let me restore factory settings (and I don't have it).
2. I can only install the default OSX (10.6.6) or a later version (that 10.6.3 DVD may not have the correct drivers for my system).
Are these conclusions right? If so, would the Apple Store replace my disk for an updated 10.6.6. one? If not, then what are my options?
Thank you!
References:
http://manuals.info.apple.com/MANUALS/1000/MA1172/en_US/Snow_Leopard_Installatio n_Instructions.pdf
http://support.apple.com/kb/HT3910
http://support.apple.com/kb/ht2186
https://discussions.apple.com/message/19444837#19444837
https://discussions.apple.com/message/18085179#18085179
http://forums.macrumors.com/showthread.php?t=1163160

Phone AppleCare and order the computer's original disks.
(92307)

I normally dont need a login when I install new program, but I try to Install a new flash player im asked to write a login and I have no clue? when I search for help it suggest to put in the original installation cd but that doesnt work. Please help!

When Trying to install the newest Flash player, Im asked to fill in my login.
I have no clue what my login is. (It happened very rarely that I was asked to fill in this when installing a new program, and the login I have used before are not valid now.
When I search for help, I am suggested to put in the original installation Cd.. and press the "C" button when I hear the starting sound... but when I do this nothing is happening.
Please Help me If you have an idea for a solution to this problem!
/ Joel

You need the admin password you created when you first set up the machine. Just about every installer running under OS X will require you to authorize the installation by entering an administrator password - even software update requires this. You really should not forget your admin password, as it is required for many things in OS X since, unlike Windows, you often need to manually type in the admin password to proceed with an install or update (whereas Windows will take admin authority, if you are logged in as an admin, by simply clicking continue or yes).
If you cannot remember your admin password, you can reset it from the recovery CD that came with your mac - http://support.apple.com/kb/HT1274

I am trying to load "The Sims" for OS X 10.1 and higher; first time the game would lock up after the preview, now I can't even get the installer to load after sending the original installation to the trash. What could I be doing wrong??

I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party). I definitely installed them in the correct order. Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview.
I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install. Now, the initial Installer on The Sims primary CD will not respond. I have to force quit to unlock the install.
I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program? I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
Thanks,
Joe

For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

How do I re-install adobe premiere elements on the same computer? Original installation had error -

How do I re-install adobe premiere elements 11 on the same computer. Original installation had error - missing dll file.

What computer? What exact error? Details are everything...
Mylenium

Original Installation CD iMac G4

Hi ALL,
As the tittle of this topic already says, I'm looking for the Original Installation CD iMac G4
I called Apple support in Holland an Belgium an after I gave them the serial number from my iMac 01234 .....
I think that they misunderstood me. The guy was talking about version 10.2.7 that came with my iMac. I clearly said that I don't wont the OSX version that came out during I both my iMac.
But the installation CD's that is needed to install first with the basic system drivers etc ...
They ask for these CD's €80 to 90,- ??
Is this right or wrong ?? Now I'm afraid to order them.
Dimaxum

If you want to change just the Computer Name, then open Sharing preferences and change the name in the top field. No need for installer discs to change the Computer Name. You would need them to change the account password. Changing the short name used for your Home folder is another matter, but you don't need installer discs for that either. You would need the freeware utility, ChangeShortName - VersionTracker or MacUpdate. However, the current version requires Panther or later, so you would need to contact the author to get an earlier version that will work with Jaguar.

Cant Install Tiger From Original Installation Media After Hard Drive Failure.

I have this MacBook:
http://everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-black-13 -mid-2007-specs.html
Hard Drive failed (no boot, nasty clicking sound).
I installed a new hard drive. Tried to install Snow Leopard from a retail disk - it would boot from the disc and I would get partway through the installation before stalling.
After doing research, I realized I needed to install from the original installation media (tiger) and then upgrade to a newer OS.
I dont have the Original installation media, called up Apple - paid their fees, got the 4 installation discs and no pressing C while booting, or pressing the option key will get the computer to boot from that installation disc.
I just get a folder with a ?
I know the drive works fine, because it booted normally from the Snow Leopard disc.
I know the new disc Apple sent is good, because I put it in my other computer (iMac) and saw the installer and was able to open the PDF readme.
Now im stuck - cant reinstall the OS because I cant get it to boot off the disc!
When holding down the C button during boot, I can hear the disc drive making noise - but all i get this that blinking folder with a ?

I could not boot into time machine's external drive. I used my snow leopard disk to install and and then Mavericks from app store. Then migration assistant.
I am thinking about a backup to my backup.
thanks for the help.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Problem restoring original installation

I had a harddrive replacement on an Envy laptop and cannot restore the original configuration as Windows is telling me it cannot reinstall with the system configuration. What are my options?
This is an HP product and there was a recovery partition on the harddrive. I had no luck following HP instructions to recover the original installation from this partition. When I had bought the laptop in 2010 I also purchased HP windows 7recovery
disks When I used these disks, they supposedly reformatted the windows partition and reinstalled drivers and files necessary to run windows. However when windows boots the computer it progresses to a screen that says starting windows ->windows could not
complete the installation. To install windows restart the installation.
I have redone the whole thing and the initial message after both recovery discs have run is a choice of an HP web installation that allows a connection to my wifi but then if I stay with that, I can't get anywhere as I don't have a browser
installed and the choice to go to windows starts the loop I end up stuck in. the first error screen says that windows can't install because of a hardware problem which I am assuming is because of the different harddrive. I get the above message to restart
the computer and end up in a loop that gives me the same message again and again. I have all the information I could collect...my windows7 key, the product #, system board #,UUID #, PCID #, product ID #. I have run diagnostics on the memory and hard
drive and all are fine but the diagnostics just say 'no data' over and over.

You need to be very explicit about your situation:
is the replacement hard drive exactly the same capacity as the original?
what are you using to reinstall the system? Is it a backup image?
have you contacted the Envoy Technical Support for assistance?
Explicit details are required so the situation can be properly evaluated.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

The problem with Creative Audigy SB0090

Hello.
Installed Creative Audigy SB0090.
Switched off the built-AC97 in the BIOS.
Do not hear a sound. There is a hiss, and through him to hear the faint sound. Plug speakers SVEN IHOO 5.. Help to understand and [email protected]

A can not be compatibility problems with Behola TV 505 FM?
where you can download this version?

HT1338 With original installation cd missing, how do you reset OSX 10.6.8 (originally OSX 10.5) to factory settings??

With the original installation cd missing, how do you reset a computer (with OSX 10.5 upgraded to OSX 10.6.8) to its default settings?

benfromnv wrote:
With the original installation cd missing, how do you reset a computer (with OSX 10.5 upgraded to OSX 10.6.8) to its default settings?
The machine came with 10.5, those disks are not available anymore from Apple.
You use the $29 10.6.3 white retail disks you get from Apple store online or already have in your possession.
Yes you upgraded OS X 10.5 to 10.6.3 with them, it also contains the entire 10.6.3.
When you "upgraded" your Applications and User accounts folders remained while only OS X 10.5 folders was replaced with 10.6.3 folders.
So if you hold the c or option key down while booting from the 10.6.3 disks, you can use Disk Utility to erase the entire drive and reinstall 10.6.3 only, like a brand new machine.
How to erase and install Snow Leopard 10.6

Need original installation software for iQue 3600

Hello !
Can someone point me in the right direction to find the original installation software for the Garmin iQue 3600 handheld GPS.
I found the unit after I thought it was lost, the unit charges and operates in Palm and GPS modes and now I need to hotsync the unit so I can update and start using the hand held again.
Thanks in advance!
John
Post relates to: None

I basically did a Google search for your device and went on the Garmin site for the info. I provided.
It states in the manual that the unit can play MP3 files but it doesn't say how. I saw an audio Icon on the home screen of the unit in the user manual. That may be the application to use.
I read a review on a webpage that stated you need to use an SD card for the audio files. Typically with a Palm OS device, you create a folder on the SD card that is named Audio on the root directory of the card. You can then copy MP3 files to the card using a card reader on the PC.
Here is a link to the Palm website regarding: Getting Started With Photos, Music & Videos.
http://www.palm.com/us/support/handbooks/F03/Media_F03_ENG
There are several different media players for Palm OS that may work on your Garmin. The Core Pocket Media Player, realplayer, etc.
You may want to contact Garmin regarding this or browse their forums for a solution.

Audigy SB0090 Original Installation

Similar Messages

Maybe you are looking for