Audigy SE and Windows 2000

under windows 2000, so I download the driver and the other fluff from the Creative site,?or so I thought, the driver never installed, I downloaded the package again same result., What is up? I have bought many creative products in the past, never any problems, until now. My SB000 in now reinstalled in my system awaiting results of this message, it still works, gets funky on line in record, the record level goes up all by itself and trashes my recordings (this is why I bought the Audigy) but it plays great!.
Ryan?

Which driver are you using at the moment for the Audigy SE (name and driver version)?
Can the Windows 2000 Professional detects that there's a new hardware installed and ask you to install the drivers?
And what kind of motherboard (with onboard sound?) are you using (brand and model)?
For the time being try the following:
- disable the onboard sound on the motherboard via the bios menu (if you hasn't disabled it yet or if you indeed have an onboard sound);
- try the soundcard in other pci slots the one you are now using;?
- try the Audigy SE in an other computer if it's possible (a friend with a computer can help you out.
Good luck!?

Similar Messages

Acrobat 3D and Windows 2000

Everyone that has the Windows 2000 operating system has problems with the Acrobat 3D models. The models were created using Windows XP and were tested using Windows XP. I am assuming that Acrobat 3D and Windows 2000 are incompatible. Adobe states Windows 2000 compatibility. Does anyone know why users with Windows 2000 are having problems with my models?
Thanks

Yes, I have checked the version and they have Reader 7.0.8. I also checked that they have the latest version of DirectX. Of course there are a number of remote Windows2000 users, so I haven't the ability to check the service pack installations, graphics drivers, and so on. Many of these users are schedule to be upgraded to new laptops (with Windows XP installed).
I also have the most recent version of Acrobat 3D and have installed all the updates.
It seems the problems are different among different users, but everyone seems to have some type of problem when using Acrobat 3D and Win2000.

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Nokia 6085, PC Suite and Windows 2000

I can't find the PC Suite version that will work with my phone and Windows 2000. Can someone point me to where it is so I can download it please?

Active_Lad wrote:
I have a trusty 6600 (that neither slides nor folds!) but find that I can't use the normal PC Suite that is Win7 compatible; I must use a device-specific version. However, the device specific version doesn't support Windows 7. So I am stuck. Is there a workaround to either force the device-specific version to work on Win7 of get the 6600 to work with the normal PC Suite?
Sure you can. Install in XP compatibility mode as admin.
http://europe.nokia.com/support/product-support/nokia-6600/software/pc-suite#
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Audigy 4 and Windows 7

Audigy 4 and Windows 7xAm I basically SOL in waiting for a working driver for the Audigy 4 on Win7 x64. I have tried both official releases from Creative and several releases from DanielK as well, and none of them fix the crackling/popping noises from this sound card. The most recent driver from Creative lessened the popping a bit, but it became quite noticeable if I kept music playing while entering a game.
I ask because I am on the fence about cutting my losses and not dealing with Creative or their products ever again, or actually waiting for a working driver.
I have read over the thread about Nvidia and SLI, and while I do have an Nvidia 8800GTS, I do not have SLI.
If anyone could provide me an answer as to if this problem is still trying to be fixed or if Creative has just abandoned the Audigy cards altogether, it would be appreciated. Thanks

I suppose fi've days of silence answers my question. I'll try a different brand next time.

Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

Hi,
Yes, What you say is right.
"The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
Sun One Web Proxy Server is as same as iPlanet webproxy server.
May be in future relase of proxy server SSL will be supported in Win2000.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

Remote Control and Windows 2000 Server

Does anyone know if it is possible to use Zenworks for Desktops to remote
Contol on a Windows 2000/2003 server ?
Regards
Johann Folkestad

OK, thanks.
Johann F
"Marcus Breiden" <[email protected]> skrev i melding
news:19gl0uyoxzfhl$.[email protected]. .
> On Mon, 27 Sep 2004 08:43:58 GMT, Johann Folkestad wrote:
>
>> Does anyone know if it is possible to use Zenworks for Desktops to remote
>> Contol on a Windows 2000/2003 server ?
>
> ZFD will not support RM of a server... you need ZFS for that...
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Problems with JFileChooser and Windows 2000 (can't see mydocuments contents

Hi! I've an applet which has a JFileChooser component. In other Windows, I can select the MyDocuments folder and it goes there and list all the contents OK. But, in Windows 2000, when I go to MyDocuments, none of the contents is listed in the file chooser. I need to navigate through all the directories to get there (C:\documents and settings\user\my documents) and then, it shows its contents, but obviously, I don't want it to be this way because is difficult for the common user.
Any idea of why is going on this?
Thanks in advance!

Hello, You need to use something like o=isp as the
root DN, then o=yourorg.com goes beneath it.
i.e.
For the other questions on setup, just choose o=isp
as base DN when you set up the directory server. When
you run ims_dssetup.pl, choose o=internet as the DC
tree base, then choose o=isp as the user/groups base
suffix.
When you are installing messaging server it will ask
where to put the default organization, this is where
you would choose o=abc.com, o=isp
For more info on how this structure works please take
a look at this link and it will all fit into place:
http://docs.sun.com/source/816-6017-10/changes.htm#170
8Alright, I got ims_dssetup to run successfully. But now when the ims 5.2 installation is about 50% done, I get the message:
A serious problem occurred while installing the iPlanet Messaging Server Messaging SIE entry in LDAP (msg.cfgldap.sie.inf). It reported the following problem:
The server configuration for the Messaging SIE entry in LDAP (msg.cfgldap.sie.inf) cannot be created.

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Oracle 8.1.7 for Unix and Windows 2000 Active Directory

Is it possible to integrate the users and passwords of an Oracle Database running on Solaris with the users and passwords defined in a Windows 2000 Active Directory? What are the requirements and the necesary steps?
I've read the documentation and it shows how to do it if you install Oracle in a Windows 2000 Server, but it does not mention about installing it in any kind of Unix.

You should consider to base your firm security and central user repository on REALLY SECURE and ROBUST product technology. Not on Windows 2000 Active Directory. Win2K AD is known to be slow and insecure. If you have Oracle on Solaris your data is secure and next step is to move user accounts to real user repository. It may be one of well-known LDAP servers. Try to read some materials on CERT Coordination Center (http://www.cert.org) which describe LDAP servers. After this you can choose the server which best suite your needs.

Compatibility Issues with CS2 and Windows 2000 XP??? This is supposed to be THE one operating system CS2 DOES WORK ON? Can someone help - I really need my CS2 back! Thanks.

HELP! Years ago - SEVEN to be exact- I PURCHASED Adobe CS2 and used it extensively. Then I was in an accident that took five years to recover from. After my recovery I tried to get back to using my Adobe products only to find that Adobe was discouraging use of CS2 and since I OWN a LICENSE and that was the LAST version I used I wanted to begin again with a version I am familiar with. Many months later, apparently I wasn't the only one who wanted to KEEP USING CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT due to OS compatibility issues Adobe continues to discourage downloading and use. HERE'S THE THING: I have the SAME SYSTEM running the SAME OS as when I first PURCHASED IT. I have downloaded the EXACT SAME VERSION of CS2. It installs fine. But I cannot OPEN the application and the troubleshooter reports there are "COMPATIBILITY ISSUES". WHY?!?!?!?!?
I'm on a PC running Windows 2000 XP. I OWN a LICENSE for Adobe CS2 and it used to run on this very same machine. I had to re-format my system two years ago so it has much more free space but when I try to OPEN the application it won't run. When I run the Windows Troubleshooter it reports system compatibility issues?! Can anyone advise me what to try now??? Thank you.

Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
Can you advise anything else . . . anyone? Thank you!
Khrystle13

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Compatibility of windows xp with labview and windows 2000 with labview

I have a very weird situation that I am not sure even I can decribe it clearly. The thing is we have two set of equipments. One: windows 2000 with DAQ card, PCI card, the other is windows xp with same DAQ card and PCI card. All the labview software are the same version. All the program are the same. But the program on windows xp has a really weird problem. Sometimes, the signal is wiped out when I run the program and sometimes it doesn't. I am curious whether the two windows system have different order sequency. Is it clear? I am really sorry about the description since the problem is really strange. Thank you very much!

With more research, I think I probably find the problem but I don't know how to fix it. Here is how the program work. In Calibrate LC.vi, there are four buttons of "set". When you hit set button, the program will aquire 10 data points which will form the signal we need. But the problem is when I hit set button, no signal at all.So I am thinking the program didn't aquire any data in. I uploaded the Calibrate LC vi and also the Aquire Data vi. Does anyone can give a suggestion how on to fix the problem? Also, I double checked the PCI card. The interrupt request for PCI 6036E in windows2000 computer is 19, that in windows xp computer is 21. Will this be a problem too? Thanks!
Attachments:
Acquire LC Calibration Data.vi ‏34 KB
Calibrate LC.vi ‏108 KB

ITunes 7.4.3 and Windows 2000

My computer (running Windows 2000 SP4) locked up when attempting to run the latest iTunes update. After thay, iTunes was corrupted and would not run. I removed the application via the Control Panel, and downloaded iTunes 7.4.3. The installer gives me an error, stating that it is only for Windows XP and Vista. Clicking OK leads to a box where it explains there was an error, and to try again later. The only option at that point is to click on "Finish." I've tried this several times, and ended up reverting to an older version (7.1.1.5). I don't see anywhere that Win2K is no longer supported, so I'm mystified as to the problem. I'm running for now, but concerned that this situation will lead to long term issues. Up to this time iTunes has been fine, and I've encountered no difficulties. Any help will be appreciated.

I'm shocked that Apple would force all purchasers of ANY new iPod to have to go out and buy upgrades to their OS on the windows side!
This effectively makes a $149/$199 new iPod Nano actually cost the customer a minimum of $400 ($199 for the XP upgrade).
Guys--what were you thinking? At this point (and after reading the multiple posts from many sites from customers who DID upgrade to XP only to find BIGGER problems with their XP created from the attempts to use iTunes) it seems even spending another $200+ will only cause problems beyond just not getting into iTunes. I feel like I have no choice but to return my new Nano. I cannot afford to have my whole PC crash just because Apple didn't choose to support Win2k.
Again--I dont' get the thinking here.

Audigy SE and Windows 2000

Similar Messages

Maybe you are looking for