Audigy SE newest update 2/16/07 made my crackling/pop issue wo

im starting to have little faith in that creative is going to be able to fix all these problems with vista and their sound cards. the new driver update that came out yesterday made the crackling/pop issue worse, guess im gonna have to install the older drivers again and just wait for the next update.. sigh

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Similar Messages

  • Snap crackle pop issue....fixed - audigy 2 plat/

    My first post, Hope the title doesn't mislead/anger anyone, but i truly believe these solutions
    are uni'versal and can be applied with just about everyone.
    My card is almost 5 years old now or so... I've seen the frustration on this board about this
    nasty issue.... i felt SO bad for some of you guys that i just had to sign up and share my
    knowledge (or lack of!) for the multiple, possible 'fixes' to this. its not entirely CREATIVE's
    fault and there is ways to fix it, you just need a bit of Patience and the willingness to learn
    a bit more about your hardware if you arent too savy with tweaking it. this might of all been
    said before, but i really hope this helps some of you.
    Lets get the blahblahblah's outta the way just to be safe, shall we? Obviously, make sure your
    card isn't sharing an IRQ with a cd/dvd device, or any kind of hardware that transfers a lot of
    data constantly or uses a lot of power like a hard-dri've, maybe even certain gpu's. In my case,
    my bottom PCI-slot (3/3) only shares an irq with a USB port and as corny as it sounds it did
    improve the issue (i disabled that USB, but that isn't necessary its overkill/fail-safe
    precaution, probably doesn't even help at all, paranoia setting). download Si-Software Sandra to
    see exactly what belongs to where and what irq is being shared with what. Also before i forget,
    clean out your dri'ves with bleach/acid/napalm with a program such as Drivercleaner, just to be
    safe, right?
    If you have anything on your Motherboard that's VIA/raid related, its imperati've you upgrade the
    drivers for it, it could very well be your single solution, for example the latest via_hyperion
    pro_v5a.zip did it for me and my particular setup just recently after a small hardware upgrade.
    this fixed the MAJORITY of the pops in several different machines with these motherboards as well
    i might add. Also make sure the Cable is newer than 2 years old, dirty worn cables can
    cripple/weird out any piece of hardware, that goes for HD's, CD roms, ...anything that uses
    IDE/serial cables etc. lots of people toss their dvd/cd roms out thinking they've used its
    life-span, when a brand new ide cable is all it really needed. but... this VIA/raid driver
    problem seems to be a pretty common fix in my experiences.
    Gamers who suffer from "sudden" or "random" pops here and there while gaming......... with time
    will notice this occurs usually when the HD is seeking a lot of info and is under a decent amount
    of stress, OBLIVION is a good example of the HD being as important as ram/cpu/gpu IMO. that's
    why....... "it seems to do it more (pops/cracks) with certain games than others". ACOUSTIC
    MANAGEMENT is Often to blame for this in My opinion, and some maxtor dri'ves come with this
    enabled from the factory (why, why why?!! ...die die die!!!). Imagine setting the In-game HD
    cache setting Tweak for obilivion enabled to , + Acoustic managementenabled....it turns
    preformance into a bloody mess, and will (possibly, most likely?) crack annoyingly often whenever
    a new area is being loaded and sufficient data is being called, not to mention make a less
    experienced gamer think his machine is completely screwed for no reason. Acousitc Mangemtn
    enabled on a hard-dri've can be suicidal for certain games and will almost guarantee preformance
    issues, cracks, burns, bruises, broken bones, stab wounds.....and most likely the lovely POPS...
    the nasty loud firecracker ones...it can be so bad to the point where many of us will not even
    play anymore out of frustration, especially for you audiophiles... leaving us angry and desperate
    for a fix. Acoustic management CRIPPLES performance and destroys seek-time, that i AM sure of,
    so fix it anyway for your own good, unless you don't care for performance. Please, get rid of
    this nasty, possibly/commonly built in feature that turns a 7200rpm dri've into a 5400rpm (ouch),
    make SURE this is disabled for you maxtor/seagate HD owners who play games or just want better
    performance period. You'll have to google those instructions, I wouldnt dare say more.
    On a separate machine, "tad in" and "cd audio" had to be muted to stop a lot of it, as well as EAX
    effects (i know you love eax, but its worth the sacrifice) slider turned DOWN to 0% even when disabled.
    this may not be necessary for everyone, but a lot of us suffer from those soft "echoey crackles"
    and its a quick fix. im sure you've all read this "solution" 5 billion times, but it doesnt hurt
    to put it out there. that, or dxdiag or control panel audio properties the slider to Standard acceleration, better to lose eax IMO.
    there is no support or guarantee with this patch, and it supposedly doesn't support/work properly
    with XP Servicepack 2, however this worked on my dads machine and a friends' as well. GOOGLE
    "down vlatency", (not "download" vlatency) and click on the "georgebreese.com" link and try his
    vlatency_v020_beta2.exe. this simply overrides some BIOS settings that many of us cant access
    easily or at all, and boosts IDE latency and on a lot of different PC setups and gives more
    juice to the PCI bus by editing how much the CPU will control the pci bus for, or something like
    that. point is, its a redbull for your PC's pci related bandwidth/juice management and it cant
    hurt to try (lets hope not j/k).
    i don't recommend messing with IRQ assignments in bios or pci latency utilities unless you really
    know what you're doing and consider yourself a power user, just a personal opinion, 32 is fine
    and a lot of people end up regretting messing with these settings.
    there is also the "turbo off" setting (think there's a "patch" for that registry setting too),
    but i seriously doubt it will resolve a users problem who suffers Heavily from this syndrome, but
    i guess you could try it.
    Last but not least, another "ghetto" fix that could improve your issue is killing your CMSS
    feature. i have no idea why that setting always acts up (at least for my machine it does) and
    causes rice crispies to go off.
    Its 2am on a Friday, I've been writing for a while, and i really don't know if i was clear enough
    with what i said, but no way im going back to read/correct cause ill be here forever. if you've all tried this before with no luck, sorry. i'm just trying to help if
    i can, and if 2 single words out of this post can even spark an idea to help fix somebodies rig, its worth it, right?
    Remember to never trust anyone with anything (especially advice) or put your hopes and dreams
    into a randomer's advice (such as mine!), keep in mind I'm just an average guy with no
    qualifications or credentials that could be wrong about EVERY single thing i just said, i could
    be completely out of my mind for all we know, listening to me could very well make your PC
    explode and set your house on fire....be warned!! haha that's my surgeon generals warning for ya. GOOD NIGHT and good luck!

    Here's the link to the download:
    http://www.apple.com/support/downloads/audioupdate2007001.html
    Mac Pro 3.0   Mac OS X (10.4.10)   4GB RAM

  • IPhone 5 froze while uploading newest update (I believe ios 7.4?).

    iPhone 5 froze while uploading newest update (I believe ios 7.4?).  Plugged my phone into computer and clicked to update.  I left the phone to upload for a couple hours and returned to see the black screen with white apple logo, and also see that thin upload bar, which seems to have gone across the phone -- looks like the upload should be finished.  But the phone is frozen.
    I can't turn the phone off at all.  Tried holding on/off button down to turn the phone entirely off, but nothing happens.  I tried unplugging from computer and replugging it back into the computer.  Nothing happens.

    No, that didn't help.  I went over to the ATT store where I bought the phone.  They showed me how to do a "soft restart".  So now instead of seeing the apple logo on a black screen, I see the round blue logo with the music note in it, with a small font "iTunes" below that.  And below that I see what looks like the electric cable that plugs into the iPhone.
    The folks at ATT said that if I now plug it back into my computer itunes, it should reset my iPhone.  So I just tried it. Nope. The computer makes the sound as if it's recognized the iPhone plug in, but absolutely nothing comes up on my computer screen. 
    They also made an appointment for me at the Apple store, but that's not until Tuesday.
    Any other bright ideas out there?
    Thanks.

  • With the newest updating I lost all music I had bought or loaded from cd's

    Hi, I uploaded to Iphone 4 with the the newest update and all music disappeared both from my Macbook and iPhone. The icons are there but I can't play anything from the old material. I uploaded a new song which I can listen without problem? I use iCloud but don't know how to pick old files from there...if they are there anymore?
    Seppo

    I started having this issue yesterday too. I just downloaded the latest iOS update 7.0.4 hoping it would fix it, instead I'm left with a very very old version of the playlist when I access my iPhone directly, but iTunes still shows the newest playlist version even if the songs aren't playable. Plus the songs are located under Music, but aren't playable - I get an exclamation mark beside the song.
    When I export the playlist from my iPhone and try to import it back into iTunes, it tells me some of the songs could not be located, even though I went and re-added my entire music folder back into iTunes and I'm getting the exclamation mark next to new songs I know are in my folder.
    For the last year I haven't bothered making my playlist in iTunes, I generally just build the list right on my iPhone. Since I've changed computers in that time I don't have the source for some of these files, and my phone created a new backup before installing the 7.0.4 update.
    Ever since iTunes went from version 10 to 11, its been nothing but problem after problem. At this rate, I don't see the new iPhone in my future if this continues. At the moment, I'm ticked enough to cancel the iPad Mini 128GB order I made yesterday, if there's no fix coming.

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • I can't update the purchases I made with the old Apple I.D. How can I sync my old Apple I.D. with new one?

    I can't update the purchases I made with the old Apple I.D;
    how can I sync my old Apple I.D. with new one?

    Only the Apple ID used to buy an app can update an app. Apple does not merge Apple IDs and Apple does not transfer content biught with one ID to another ID.

  • Hey, i just updated my iPad 2 to the newest update and know my apps have gone and i can't re-download the paid app i bought :( no happy please help

    hey, i just updated my iPad 2 to the newest update and know my apps have gone and i can't re-download the paid app i bought no happy please help!!!!!!

    Are the apps in your iTunes library on your computer and did you select them to sync? Are you sure that you are syncing correctly?
    Read this.
    http://support.apple.com/kb/HT1386

  • I bought a 2nd hand ipod touch (no camera 1) and it says when i download apps need to update to 4.3 but the newest update is 4.2

    Hi i bought a 2nd hand ipod touch (it has no camera so don't know the generation). i have restored it to factory settings & did the update on the mac. but when i plug it to itunes it has update of 4.2.1 & says it has the newest updates. but when i try to download apps in the app store it says i need update 4.3 but my itunes wont do this. how do i get it to update etc or download apps (this was for my God-daughters 8th birthday)

    The 2G iPod can only go as high as iOS 4.2.1
    To help find compatible apps
    Old Apps
    VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
    apps for ios 4.2.1: Apple Support Communities
    Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
    HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
    apps for 4.2.1 (also works for 3.1.3)
    Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
    4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

  • Heey i bought an iphone 3gs about 2-3 months ago (used) today i blanked off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it :(

    heey i bought an iphone 3gs about 2-3 months ago (used) was in mint condition well taken care of not even a scratch as soon as i got home i tried syncing it to my computer but didnt work it didnt even sync or notice my iphone software .. so i went to my friends and synced it there it has been working for music but videos wont work? but i didnt care  and then the pop up that says update so we would click it wait and it wouldnt work ever since ive had it so i left it like that so i went to my friend today i blanked it off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it PLEASE HELP and cant get a new sim at the moment or take it into the apple store because i live about an hour and a half away from the city and rarley go to it please help me !!!!!!!!!!!!!!

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I have iPhone 4 with newest update and Mac laptop with Snow Leopard and current version of iTunes. When I hook the phone up via USB, iPhoto pops open and reads the pictures for import, but iTunes doesn't do anything. Not seeing the device as a USB, either

    Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
    Regards,
    Lindsey

    cynecasey wrote:
    ... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
    You have written a very long story, and I admit I have skipped most of it.  But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
    The fact that you chose not to update your hardware does not mean you could not update your software!
    OS X 10.5 is very old (about four years).  iTunes 11.1.5 (current version) requires at least OS X  10.6.8 to run.  Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
    You would start here:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

  • I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    Any numbers or other details on the mesages given?
    Did you try to connect in recovery mode again? iOS: Unable to update or restore
    In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • After the newest update, i can no longer type in traditional chinese ( pin yin), does anyone else have the same problem?

    after the newest update ( iso 7) , i can no longer type in traditional chinese ( pin yin), does anyone else have the same problem?

    I downloaded and tried EasyFind. It works but it took 30+ seconds to complete finding 3 files that are on One of my Five 25+ Gb partitions of my 130 Gb Seagate Cuda(Really 160 Gb, but my Sawtooth will only recognize 130) I figured that if I ever got a better box, I could reformat it to see the whole 160 Gb. So, as far as I can see, Spotlight's indexing scheme which finds the files instantly is probably preferable. Spot light allows you to rename your files from within it's app window. I've always thought that was pretty powerful. Could my doing so be causing me any issues? As i said it is the inability to Type in the Finder that seemed to be caused from changing file Extentions that were mis-written. Maybe it was a delayed reaction to my renaming files in the Spotlight app? I've done both on occasion.
    As for these .DS_Store files. Apparently you can NOT stop them from being written to any folder that you touch/open/view during a days session. But, as a function of the OS, are the essential to have in their respective folders Forever? I've looked at the .DS_Store terminator app briefly and assume that getting rid of these files won't hurt the regular operation of my OS. They will just be re-written if I ever have to go back to any particular folder again. But, apparently, some have said that if the plan on burning a CD or DVD of their data, they delete the .DS_Store files first and then do the burn.
    I'm thinking from your having suggested this tremination app that you suspect that my having all of these ,DS_Store files could be a situation where any of them could have become corrupted and terminating them regularly should be part of my regular maintenance.
    Does that sound like I'm understanding what I can do?
    TIA

  • I've just updated my Itunes to the newest update (iso7 I think) and now my itunes won't even open. It just jumps 2-3 times on my dock then doesn't open. I have no idea what to do , please help!

    I've just updated my Itunes to the newest update (iso7 I think) and now my itunes won't even open. It just jumps 2-3 times on my dock then doesn't open. I have no idea what to do , please help!

    Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.

  • I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

    I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
    Thank You in advance!!!

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • My newest update to iTunes wiped out ny playlists. How do I restore them using time Machine?

    My newest update to iTunes wiped out ny playlists. How do I restore them using time Machine?

    Dead in the water, sorry.

Maybe you are looking for

  • IPhone can't make calls, won't play voicemail

    I bought my iPhone in September, and it has been great up until today. Now, the phone doesn't ring (or vibrate), and when I try to make a call, I hear no dial tone, and the call fails after nothing happens for about 50 seconds. I can't hear my voice

  • XML File not fully downloaded Fully from Application Server.

    Hi, I am downloading an XML file from Application server. It's only downloading partially. Below is the Declaration for target Internal table. DATA: BEGIN OF infile OCCURS 0,         line(65535) TYPE c,       END OF infile. SAP does not allow more th

  • Issues with apple TV 1st Gen and iTunes (current)

    I'm having trouble getting my 1st generation AppleTV configured the way I want it... Here is my setup: I have iTunes Home Sharing turned on, and access a common iTunes library located on a networked drive. I use it's content from my macbook (not alwa

  • How to build a query based on(UNION) 3 vendor InfoObject

    Dear Experts: I have a requirement to build one query based on 3 vendor InfoObjct: 0VENDOR + 0VEN_COMPC + 0VEN_PURORG. I tried to build a multiprovider upon these 3 infoobjects, but when I Identify(Assign) the key for each InfoObject, supposely there

  • Nothing happens when connect iTouch to mac - is the cable already dead?

    Last week when I connected my (4 week old) touch to the right-side usb port, nothing happened, but then it connected fine to the left-sided port; bit funny I thought, but got on with my syncing etc. Today, nothing happens when I connect on either sid