Audigy Sound Blaster model number SB0240 HELP PLEASE

hello, my Toshiba laptop died a few weeks ago, so i borrowed my brothers desktop. well i had to format and do not have any of the drivers for the computer.
i went to the support center and found my card by the model number, but the link to my specific driver was no longer found.
a link to my card's driver would be more than appreciated.
please help
!!! >_<

dkeedy,
The SB0240 is an? Audigy 2 or Audigy 2 Platinum. Some variants, such as SB0249 and SB0245 are OEM, meaning that they came with the computer, and the commercial software might not work with them.

Similar Messages

  • Microfone problem with creative audigy sound blaster

    hello,
    ill explain my problem
    I just bought a creative audigy sound blaster SE and i installed everything
    first: problem: where do i have to put the cable of my microfone? in the blue or red bus?
    and if i have putted in the blue or red one, do i have to change something in my configurtation of my soundcard?
    plz help!

    I resolved my problem...
    "thanks"

  • HT4623 cant find software updates on my iphone4 model MC605J.Need help please..

    cant find the sofware update on my phone model MC60J
    Need help please..

    What happens when you connect the iPhone to the computer you
    usually sync with and use iTunes on that computer to update the
    iPhone?
    What version of iOS is currently on your iPhone?

  • HI,I AM THE NEW MEMBER OF I PHONE 4  FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD  MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

    HI,I AM THE NEW MEMBER OF I PHONE 4  FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD  MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

    Hi, I see I haven't had any responses but these problems haven't been fixed.
    I still haven't been able to transfer purchases from my phone to my comp so consequently have stopped purchasing on my phone.
    I bought a couple of albums recently via itunes on my comp, and tried to tranfer them to my phone via a playlist, but the sync often crashes. One album transferred except for one song, and the other hasn't at all. What happens is that when I autofill from a playlist it often hangs for ages on the first song and then I have to quit the application altogether as nothing happens for ages. Basically, the whole Itunes software freezes. 
    After this I find it hasn't transferred any songs, but they do appear greyed out on my phone, which means it has transferred some basic data such as the titles, but not the song itself. When I try to repeat the process to complete the transfer Itunes tells me that it can't transfer because the songs are already on the phone, but they are not!! I can't click or remove on the greyed out items, so now I have a couple of almost full albums on my computer that I can't tranfer or install on my phone, and a whole bunch of greyed out songs on my phone that I can't play or remove!
    The rest of the problems as above still stand. I downloaded the latest itunes OS updates but nothing's changed. I haven't done the very latest iphone update yet though because it says you need to make sure your stuff is backed up, and I don't want to lose the purchases I made on the phone that I can't transfer to my comp. I'm planning on uninstalling itunes completely and reinstalling but I have little faith that this will fix the issue.
    Can someone please help at all?? I'm so sick of this!

  • Every time I open one of my CS6 Products I have to re-enter my serial number.  Help Please.

    Every time I open Photoshop, Illustrator or any other CS6 product I have to re-enter my serial number.  Help Please!

    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Mylenium

  • I need drive sound blaster model ct4780

    ' i need dri've sound blaster (li've) model ct4780
    [url="http://vozforums.com/archi've/index.php/t-43367.html" rel="nofollow">Li've ch?p EMU0K-[/url]
    please help me.
    thanks you
    im vietnam so i can't type english good

    + That card is also known as the SB Li've Value and the drivers can be found here,
    http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=485 6&prodName=Sound%20Blaster%20Li've!%20Value&subCatName=Li've!&CatName=Sound+Blaster

  • Audigy Sound Blaster and Remotely controlled speake

    I own Sound Blaster Audigy card and I would like to purchase set of Dolby surround speakers that would work flawlessly with that card. I am thinking to buy Creative speakers since they also make this card, but I need a set that could be remotely controlled, either through wire or wirelessly. Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled? Any suggestions? I wrote an email with my question to Creative sales, but nobody responded yet.
    Thank you,

    If it is the very first Audigy model (Audigy ) then it a 5. soundcard. So any 5. speaker system or below would work nati'vely with your soundcard. If you choose a 6. or 7. system they usually have an upmix function to make 5. sounds play over all satellites.
    Also, most speaker sets (regardless of manufacturer) uses some kind of remote control (either through cable or IR).
    Your question is extremely hard to answer if you are looking for tips on which speaker set to buy, but easy to answer if we take the question "Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled?" at face value as everyone with any kind of speakers should have some kind of control pod or IR remote control to their speakers.
    Edit: I will try to answer your question: you can choose whatever speaker set you want as I think it is safe to say they all got either a cable remote control or an IR remote. The question then becomes what exactly you are looking for and in what price range.
    Message Edited by rico0 on 07-23-2005 08:43 PM

  • My iPod touch has no sound from music and videos help please

    My iPod touch has no sound at all, help please guys.

    - The restore from backup
    - If still problem restore to factory defaults/new iPod.
    - Last, make an appointment at the Genius Bar of an Apple store.

  • SB0680 (Sound Blaster 5.1) Driver Help on W7 64 Bit

    I can't seem to find how to install that driver. :S I have been searching and searching over the internet for that driver. Can this card be verified on W7 64 bit's If not, is there like a trick or something?
    Thanks in advance.

    What sort of sound blaster 5.
    I'm guessing you mean the sound blaster live
    Have a look in this thread and you find a link to drivers for....
    This pack Supports all Live! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
    - Live! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum- Live! 5. MP3+ / X-Gamer / Digital / Platinum
    Does NOT[/u] support the following OEM / Retail models:- Host / software-based cards including Live! 24-bit- any external Live! soundcardsThe full spec is here and the drivers are here.Note the 2 gig ram thing.
    Message Edited by split0 on 06-14-2008 05:54 AM

  • Sound Blaster model SB0

    installed a Sound Blaster Li've 5. Digital?SB0220 card, now computer will not boot up, what makes this happen? before install there was a Sound Blaster CT4780 installed with no problems. any help on this matter?

    it won`t work ... when i?click to install it says that it couldn`t detect any soundblaster product in my pc ... now that`s weird... pls help...omg i am trying for ages to make this sb0244 work :|

  • Sound blaster with creative mediasource help

    i have old versions of the above but still like using them. the creative mediasource part got infected so i need to reinstall it but i misplaced cd disc that dell gave me .the versions are like 1.00.6 and are for the players and organizer. if anyone out there has that disc,would you lend it to me so i can install it.
    richard26

    Hi,
    Did your sound blaster came preinstalled along with your Dell pc? If so, you might want to check with them for the earlier version. The version available in the download area may not work/install on your system.

  • Sound Blaster Z driver settings suggestions please

    Hello everyone! I'm new here, this is my first post (I've had this account since 2009.. wow.) Just had some questions that I'm hoping someone here will know the answers to. I am using the Sound Blaster Z sound card with an Astro A40 System headset that is hooked up to the sound card via S/PDIF. My product, both the headset and sound card work great but I have a few questions about the Creative Labs driver options. First off, what software setup do you guys (and girls) recommend?
    1.) Select Stereo Direct, disable all encoders (no encoder such as Dolby Digital Live or DTS) and make the S/PDIF audio device on the sound card the default audio playback device
    2.) Select Stereo Direct, enable the Dolby Digital Live encoder, and make the Speaker the default audio playback device, with the default format settings at 24-bit 192 kHz (192000 Hz)
    If you recommend option 1, what default format / bit-rate / bit-depth do you recommend? The Astro A40 system via S/PDIF accepts 16-bit and 24-bit up to 48 kHz (48000 Hz) I have the most stability and lowest latency using 16-bit 44.1 kHz and 16-bit 48 kHz but in some (rare) cases I've noticed 24-bit having better audio clarity.
    Secondly, can anyone explain to me in deeper technical detail the difference between using the speaker output with stereo direct and DDL (Dolby Digital Live) versus just having all audio go directly to the S/PDIF output? Also, if my audio receiver (my Astro A40 mixamp) only allows frequencies up to 48 kHz, how does using the speaker output set to 192 kHz still work over S/PDIF? I can still hear things with the 192 kHz audio option still selected. If you could explain these things to me that would be great! Thank you so much!
    Alec

    Bump
    I figured this would be a common question or at least something many of you would know the answers to.. In short:
    What is the difference between stereo direct + stereo output versus S/PDIF if audio still comes in either way?
    Secondly, 192 kHz audio signals shouldn't work via S/PDIF yet it does when you select speaker output. These drivers are a tad confusing.. Thanks!
    Alec

  • Windows 7 vs Sound Blaster Live! Digital - Support Please !!!!

    Hello, i recently installed windows 7 and love the new look, but new looks mean nothing when you got no sound lol!, i've had the sound Blaster Li've! Digital for a while and i've looked everywhere for a driver to get my sound card working on windows 7 and still have no luck with doing so ......
    If anyone could post a working driver for sound blaster li've!?digital? (windows 7 32 bit compatibility) I WOULD APPRECIATE IT
    Hopefully this could be sticked with a good solution for other people struggling with this anoying problem thx !!!

    I About the only thing you're going to find for drivers for that old card is this,
    http://forums.creative.com/creativel...hread.id=40948
    as Creative will never release Windows 7 drivers for it.

  • Cant re install sound blaster live 24 bit.HELP!!!!!!!

    i install my card 2 days ago it worked fine for a while but the my recording levels were low could not record i went in to my comp set up enable the onboard card and that worked so i fugure it was an exe. problem so i uninstall now i wana re install and it says no sound blaster 24 bit detected i change the sound card slots that did not work i exange the card still the same thing im runing windows xp compaq presario s300nx 256 meg of ram. any sujestion? it will be highly apreciated ty

    Taino,
    You may need to cleansweep and then try to reinstall the card. There is a chance that there are still files remaining from the original install that are preventing the detection of the card. Here are instructions on how to cleansweep:
    http://us.creative.com/support/kb/ar...asp?l=2&sid=72
    Jeremy

  • Help, X-Fi sound Blaster, Model SB1090

    Hello, my fellow users,
    Please give me a link to DOWNLOAD (DRIVER) for X-FI 5. SB090. the problem is only 2 fronts speaker and SUB are working, but if I test from the configuratio its all working. Please help me out to solve my problem. Thank you..

    Hi,
    Have you turned on CMSS? That should give you a virtual surround.

Maybe you are looking for