Audigy under Windows Server 2003

Hi!
I've installed Windows Server 2003 for a Project at work but I'm unable to get the audigy working. After insatlling Win XP Drivers I get the message 0x80070057 at the direct Sound Tab of direct X. When i disable hardware acceleration, the system says, there is no sound card. I've already started the service for sound in Windows and the system founds the line in and the MIDI processor, but no output device. I've also tested the KX audio-Dirver but the same problem appears.
Thx for help. And please hurry, it's urgent.
So und hier nochmal auf dutsch:
Ich hab f?r ein Projekt auf der Arbeit Windows Server 2003 installiert um zu schauen, wie es sich darauf spielen l?sst. Aber ich krieg die Audigy nicht zum laufen. Nach der Treiber installation bekomme ich die Meldung 0x80070057 im DirectSound-Tab von direct X. Wenn ich die Hardware beschleunigung deaktiviere, sagt er pl?tzlich, dass er gar keine soundkarte mehr finden kann. Ich hab auch schon den Dienst f?r die Sound-Wiedergabe gestartet und das System findet den Line in und den MIDI-processor aber kein Ausgabe Ger?t. Ich habe auch schon den KX-Treiber probiert, genau das selbe.
Danke f?r Hilfe, beeilt auch bitte, es ist wirklich wichtig und dringend f?r mich!!!

I have audigy 2 NX plugged into a windows 2003 server, ASUS S-Presso.
Although I respect that it is not supported, any help would be appreciated!
All the software installs correctly, once installed, diagnostics completes, etc and the remote control works. The only problem is that he machine will hang (and go 00% CPU) the moment it attempts to make a sound (the NX also goes to "mute").
Audigy sound card driver :- dated: 9/26/2003
The composite device that associates itself with the audigy is:Microsoft, 0//2002 - 5.2.3790.0
(I tried changing the composite device for the one on the audigy CD, and this does not help). I think the composite device it installs came with my wireless mouse/kwyboard from Microsoft?
I tried the standard creative updates, but they do not correct the problem.
I tested the NX on a normal XP laptop and it works fine.
Previously I had a Philips rhythmic edge, and this still works perfectly (.89 drivers). I did uninstall it's drivers and the card but this did not help.
I do have another USB audiodevice on the system. A Tiptel "cyberbox" 00 VOIP gateway. I am concerned about a comflict with this one.
I need windows 2003 because of a work application that requires it, but I would be willing to run w2003 in a VMware it if I was sure that going out and buying a XP home license would solve my problem.
help!

Similar Messages

9i R2 under Windows Server 2003

Hi all,
I installed 9i R2 under Windows Server 2003,
will there be any technical issues on this installation.
Since after the installation, I created a Database using
the Database Configuration Assistant, DB creation was
successfull, but was unable to connect to the DB immdtly.
I restarted the machine to get connected. I'm not a DBA
can anyone help me in understanding why this happened?
Is 9i R2 Compatible with window server 2003?
Thanks.

According to Metalink Certification matrix, Win 2003 requires at least 9.2.0.3 Patch set (also available 9.2.0.4, 9.2.0.5 and 9.2.0.6).

Orion under windows server 2003

Hi i posted a thread about running orion under windows server 2008, i got a response saying that it might not be compatible because orion for windows use an older version.
So now im trying orion under windows server 2003 and i still cant make it run.
orion just finish with no error but also without doing any test, and if i go to the event viewer i can see this error message:
Faulting application orion.exe, version 0.0.0.0, faulting module orion.exe, version 0.0.0.0, fault address 0x0004db7f.
I found another post asking the same question saying that this might be a problem with AMD processors, but it was posted in 2008 so i thought it would be a good idea to repost it and see if anyone know about some solution to this problem.
Thanks

Switched off NUMA support to get a similar problem to go away. Now up against:
SKGFR Returned Error -- Async. write failed on FILE: \\.\X:
OER 1: please look up error in Oracle documentation
rwbase_issue_req: lun_aiorq failed on write
rwbase_run_test: rwbase_issue_req failed
rwbase_run_process: rwbase_run_test failed
rwbase_rwluns: rwbase_run_process failed
orion_thread_main: rw_luns failed
Test error occurred
Orion exiting
Win 2008 Orion 10.2

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

MSI TV Card doesn't work in Windows Server 2003 !!!

Hi All,
I have bought a MSI TV Tuner (TV @nywhere series)
I Installed it on Windows XP and it works properly.
But I Installed it on Windows Server 2003 and noticed that it's not working at all !
It's TV Tuner , however, doesn't work good (It has a weak receiving power). I'm using it as a Radio (MSI Radio). But even the Radio is not working under Windows Server 2003.
I want to know what's the problem ? What Driver should I use ?
I have Installed the same driver in Windows 2003, Because there isn't any Windows 2003-specific driver included in the CD-ROM of this package.
Please guide me what should I do. I need Windows Server 2003 to be my OS. I want to know if this TV Tuner isn't supposed to work on Windows 2003 Server ? It's only desingated for Windows XP and prior ? What's the solution ?

Quote from: sma_soft on 27-August-06, 14:34:43
Hi
what a pitty !
You are a known company and you DON'T KNOW !! if your hardward can work in Windows Server 2003 or not (:|
Or maybe you don't assume Windows Server 2003 as an Operating System !
Also I checked the TV Tuner Driver Pages in your site, but I found that you don't have ANY driver for Windows Server 2003
It's exactly the driver I have on MSI CD-ROM. As you can see above, it's telling There's no support for Win2003 !!!
Your System OS Win9X/ME/2000/XP(22710KB)
Now you see ? Even in the manufactory you haven't tested and it was not important for this comany if their hardware can or cannot work on Win2003.
Maybe you have designed it especially for Windows XP and prior.
I JUST WANT TO KNOW THIS !!!
bye
OT:
@sma_soft,
Hi sma_soft! As the title of this site says: "MSI HQ User to User Forum". As I understand, we are all the same here. That we are all MSI product users and customers in this forums.
Read the article below that I got from here for you to be able to understand what I meant. You will see this article on the upper portion of every page of this forum. Just scroll upward.
"News: For your information, the MSI Forum Team is not paid by MSI.
The entire forum is run by volunteers that like yourself, enjoy MSI's products.
This forum is independent and not regulated by MSI, but the MSI Forum Team will try to assist you with any problems you have with MSI products.
Just remember, there are no MSI employees present here!"

Access Denied to report file on Windows Server 2003 Enterprise

Hi,
I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2. It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
It reports the following error:
Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
Access to report file denied. Another program may be using it.
I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice. Granting Full Control to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
Thanks.
Dan

What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Adding Windows 7 x64 drivers to Windows Server 2003 printserver

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Error installing 10g on Windows Server 2003

I am trying to install Oracle 10g on a Windows Server 2003 box. I'm following the instructions listed here: http://www.oracle.com/technology/obe/10gr2_db_single/install/wininst/wininst_otn.htm
Everything seems to go fine up until step 8. My Oracle Net Configuration Assistant fails. I get an error dialog titled "java.exe - Entry Point Not Found" the error message is "The procedure entry point longjmp could not be located in the dynnamik link library orauts.dll."
Does anyone have an idea what's wrong here?
Thanks,

The OUI 10.2.0.1 of the base release software distribution was used to install the new
component from the base release on top of the 10.2.0.2 Oracle Home.
The OUI 10.2.0.1 is not compatible with the 10.2.0.2 orauts.dll installed under the Oracle Home. OUI 10.2.0.1 and 10.2.0.2 are using different versions of orauts.dll. The OUI 10.2.0.2 located under %ORACLE_HOME%\oui\bin should be used for installing any new component (from the base release):
1. Run the setup.exe program located under %ORACLE_HOME%\oui\bin
2. Select the "products.xml" from the 10.2.0.1 DVD under database\stage or under the staging area
3. Select the component to be installed
4. After installing the additional component from the base release software distribution,
re-apply the current patchset, e.g. 10.2.0.2
~ Madrid.

NoSuchAlgorithmException under win server 2003, but not 2008

I have a strange error, I can reproduce but which I can't quite figure out the cause or solution to.
vitals: javamail 1.4.4, Windows Server 2003, JBoss.
So, I have a pretty large stack trace I won't include (yet), but it starts with a NoSuchAlgorithmException. This is tripped when I send an email to gmail servers using TLS or SSL encryption. Exact same EAR on Windows Server 2008, works fine.
Please read that again: using the same EAR & the same parameters to send the email under 2008, it gets where it needs fine. So, I'm pretty sure I have the ports/smtp server/etc nailed.
Have looked into a lot of possibilities, nothing has panned out.
Solution would be great, direction or thoughts would be enough.
Thanks in advance,
Colin

both machines do have the same jdk. our application installs everything it needs, and then uses that version.
and it definitely seems like either it's not trusting something it's getting from the gmail servers, or it's unable to understand what it's getting. snippet of stack trace below. why might that be happening in 2003 and not in 2008?
also, i've looked at a couple of questions on stackoverflow (http://stackoverflow.com/questions/6365209/java-and-ssl-java-security-nosuchalgorithmexception), and i confirmed the policy files are the unlimited strength versions. not much luck.
javax.mail.MessagingException: Could not convert socket to TLS;
nested exception is:
java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1880)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:648)
at javax.mail.Service.connect(Service.java:317)
at javax.mail.Service.connect(Service.java:176)
at javax.mail.Service.connect(Service.java:125)
at javax.mail.Transport.send0(Transport.java:194)
at javax.mail.Transport.send(Transport.java:124)
**** redacted ****
.. 14 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 257
at sun.security.x509.X509CertImpl.parse(Unknown Source)
at sun.security.x509.X509CertImpl.<init>(Unknown Source)
at sun.security.provider.X509Factory.engineGenerateCertificate(Unknown Source)
at java.security.cert.CertificateFactory.generateCertificate(Unknown Source)
at sun.security.provider.JavaKeyStore.engineLoad(Unknown Source)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.sun.net.ssl.internal.ssl.TrustManagerFactoryImpl.getCacertsKeyStore(Unknown Source)
at com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl.getDefaultTrustManager(Unknown Source)
at com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
... 21 more
---------------------------------

Tuxedo Memory Leak Issue (Tuxedo 8.1 - Windows Server 2003)

Hi
We are running tuxedo 8.1, 32 bit with patch level 258 in our windows server 2003 based production environment. We are currently facing an issue where the memory usage of machine slowly keeps on going higher and higher eventually resulting in “Memory Allocation Failure” to tuxedo servers. We then have to do a complete restart of tuxedo which stabilizes the system for other few days.
We have been analyzing the our source code in development/test environment using different tools like a customized Alzheimer tool and IBM purify but both tools reported no memory leaks. We then developed a test tuxedo server exposing a tuxedo service which simply allocates a memory to a response buffer and then returns the response buffer. I then configured tuxedo queue with same name “MEMTEST3” and configured a TMQForward server to call this “MEMTEST3” service every time a message is en-queued to the MEMTEST3 queue.
unsigned long _LIBENTRY ulTPAlloc(FBFR32 **ppc, long size)
unsigned long ulRes = MSG_SUCCESS_c;
ppc = (FBFR32 ) tpalloc("FML32", (char *) 0, size);
if (*ppc == (FBFR32 *) 0) {
vLogMessage(hGetLogHandle(), MSG_MEM_ALLOC_ERR_c, (char *) 0, (Event_t *) 0,
BM_NOSUPPRESS_c, size);
ulRes = MSG_MEM_ALLOC_ERR_c;
return (ulRes);
/*==============================================================================
Service MEMTEST2
==============================================================================*/
void MEMTEST3(TPSVCINFO *pRequest)
FBFR32 *pFmlResponse = NULL;
FBFR32 *pFml = NULL;
unsigned long ulRes = MSG_SUCCESS_c;
unsigned long ulActionCode = 0;
int iExitValue = 0;
long lTpurcode = 0;
FBFR32 *pFmlNULL = NULL;
userlog("Starting MEMTEST3 service.");
if (pRequest == NULL || pRequest->data == NULL)
vLogMessage(hGetLogHandle(), MSG_API_ARGS_ERR_c, NULL, NULL, BM_NOSUPPRESS_c);
ulRes = MSG_API_ARGS_ERR_c;
else
pFml = (FBFR32 *) pRequest->data;
userlog("MEMTEST3: GET THE MEM");
ulRes = ulTPAlloc(&pFmlResponse, 1024);
userlog("Ending MEMTEST3 service.");
tpreturn( iExitValue, lTpurcode, ( char * ) pFmlResponse , 0L, 0L );
While I was en-queuing the messages to the queue, I kept on monitoring the memory usage of the server hosting the service. What I observed was that I saw an initial hike in the usage of memory of the server followed by small jumps in memory increase. I kept on monitoring the server for a long time and the memory was never returned. What I suspect is that there is memory leak in tuxedo TMQforward process as it never released the memory allocated in the service.
Can anyone help how this situation can be avoided ?
Kind Regards,
Asim

Hi Todd,
Also as well as my previous question, I also found your reply to another user posting something similar at Re: Memory leaks in Tuxedo libraries
You mention that:
In general Tuxedo will free anything it allocates, although there are cases where memory is allocated and not freed because:
+1) it is one time or a fixed number of times allocations that will not continue to grow, and freeing up the memory just before exiting isn't of any benefit.+
+2) the memory is under Tuxedo's memory management functions where we manage our own look aside lists to provide better buffer allocation performance and again freeing these before process termination is of little benefit.+
Our code does only issue TPALLOC once and then a TPRETURN - could point (1) of your comment above also be something of concern to us, where we would observe a continuous growth of memory usage?
I know it may sound like a stupid question but do we need to run our code 20,000 times before memory gets freed?
Kind Regards,
Asim

Help:where can i download jdk1.4 amd64-bit for windows server 2003 version?

where can i download jdk1.4 amd64-bit for windows server 2003 version?

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?

Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Remotely login error on windows server 2003 using gemalto smart card

I am getting this error when trying to log on windows server 2003 remotely using smartcard. We have our own CA. We are able to successfully logon on windows server 2008 using same card.

Hi,
Base on my research, Event 537 indicates that a logon attempt was made and rejected for some reason other than those covered by explicit audit records in this category.
Would you please provide more details?
Are there any related warnings and errors under Application Logs or System Logs?
By remotely login, do you mean logon via RDP?
Here are some related links below for you references:
Event 537
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.0&EvtID=537&EvtSrc=Security&LCID=1033
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
Please get back to us with the necessary information at your earliest convenience.
Best Regards,
Amy Wang

Audigy under Windows Server 2003

Similar Messages

Maybe you are looking for