Audigy Value Delay Recording Prob

Hi, I just bought a new audigy value soundblaster. Here is my problem almost similar to the others here but my soundcard is just lower than them - audigy value:
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I tried it with Cakewalk and Adobe audition. What is the best khz of sound to save a recording to On my ASIO setting, it is set to Audition Windows Driver, which it's speed is set to 2048, the lowest i can get is at 52. When I tried 52, it's doing good except that there are some sec pause every 0 seconds on the track.

You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
jutapa

Similar Messages

Audigy Value Delay Recording Problem

Hi, I just bought a new audigy value soundblaster. Here is my problem almost similar to the others here but my soundcard is just lower than them - audigy value:
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I tried it with Cakewalk and Adobe audition. What is the best khz of sound to save a recording to? On my ASIO setting, it is set to Audition Windows Driver, which it's speed is set to 2048, the lowest i can get is at 512. When I tried 512, it's doing good except that there are some 1 sec pause every 10 seconds on the track.

You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
jutapa

SoundBlaster Audigy Value: Delay and echoing of sound output from head

I'm having problems with the sound output of my voice when chatting using a headset.. I can hear echoes and there are delays occasionally. I first thought the problem was with the headset, and so I changed it. However, the problem persists!
When I plugged my headset in my laptop instead of the desktop with the Audigy Value installed, I didn't encounter any problems at all with the sound. So I thought the problem is with the Audigy Value souncard.
What could be causing these problems?

You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
jutapa

Windows Vista vs. Sound Blaster Audigy Value = Problem

I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
I will be extremely thankful to you if you please provide a solution to these problems.
Thank You........

altho i tried this with audigy se u might wanna check this
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

Audigy Value: "Device Control" tool: what does it

Hello. Just bought an Audigy Value and I would like to try 24 bit sound. I found this tool that came with the drivers and tools named "Device Control". I can change from 6 bits to 24 bits and change from 48khz to 96khz there. But I don't know what is changing... recording, playback? I read the help file that came with the program but it does not help. Can you tell me where do I notice a change when I change the settings within the "Device Control" ? Thanks!

This error is because the order of your numerator is higher than the order of the denominator of your transfer function. This is an impossible physical situation and leads to a delta function and its derivatives in the output response. Physically realizable systems must have the order of the denominator in the transfer function greater than the order of the numerator.
Marc

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

How to print all values in record datatype?

Hello friends ,
I wrote one function which returned the departments record type.
when ever I called the function that returned departments record type and stored in department record type variable..I have to print all the values in record...
What can I do???
My code is like this...
set serveroutput on
declare
type depcur is ref cursor return departments%rowtype;
dep depcur;
rec departments%rowtype;
function ref_cur_demo(ref1 in depcur) return departments%rowtype
is
v_dep departments%rowtype;
begin
loop
fetch ref1 into v_dep;
exit when ref1%notfound;
end loop;
return v_dep;
end;
begin
open dep for select *from departments;
rec:=ref_cur_demo(dep);
--Here I have to print all the record variables;
end;

Hi Gopi,
You have to write the program in different way. In your case the function always returns only one value. You can see only one department detail as output.
To display a record type variable you need to use record type variable name .(dot) field name.
SQL> set serveroutput on
SQL> declare
2 type depcur is ref cursor return departments%rowtype;
3 dep depcur;
4 rec departments%rowtype;
5 function ref_cur_demo(ref1 in depcur) return departments%rowtype
6 is
7 v_dep departments%rowtype;
8 begin
9 loop
10 fetch ref1 into v_dep;
11 exit when ref1%notfound;
12 end loop;
13 return v_dep;
14 end;
15 begin
16 open dep for select *from departments;
17 rec:=ref_cur_demo(dep);
18 --Here I have to print all the record variables;
19 dbms_output.put_line(rec.department_id||' '|| rec.department_name||'    '|| rec.manager_id||'    '||rec.location_id);
20 end;
21 /
270 Payroll        1700
PL/SQL procedure successfully completed.
Here is the sample code which will demonstrates using ref cursors.
SQL> create or replace function get_dept_detail
2 return sys_refcursor
3 is
4
5     x_res sys_refcursor;
6
7 begin
8
9     open x_res for select * from departments;
10     return x_res;
11
12 end get_dept_detail;
13 /
Function created.
SQL>
SQL>
SQL> -- Execution
SQL>
SQL> declare
2
3      res sys_refcursor;
4      l_rec departments%rowtype;
5
6 begin
7
8     res := get_dept_detail;
9
10     loop
11        fetch res into l_rec;
12        exit when res%notfound;
13        dbms_output.put_line( l_rec.department_id||' '||l_rec.department_name);
14     end loop;
15
16 end;
17 /
10 Administration
20 Marketing
30 Purchasing
40 Human Resources
50 Shipping
60 IT
70 Public Relations
80 Sales
90 Executive
100 Finance
110 Accounting
120 Treasury
130 Corporate Tax
140 Control And Credit
150 Shareholder Services
160 Benefits
170 Manufacturing
180 Construction
190 Contracting
200 Operations
210 IT Support
220 NOC
230 IT Helpdesk
240 Government Sales
250 Retail Sales
260 Recruiting
270 Payroll
PL/SQL procedure successfully completed.
SQL>
SQL> -- In SQL*PLUS
SQL>
SQL> var res refcursor
SQL> execute :res := get_dept_detail;
PL/SQL procedure successfully completed.
SQL>
SQL> print res;
DEPARTMENT_ID DEPARTMENT_NAME                MANAGER_ID LOCATION_ID
           10 Administration                        200        1700
           20 Marketing                             201        1800
           30 Purchasing                            114        1700
           40 Human Resources                       203        2400
           50 Shipping                              121        1500
           60 IT                                    103        1400
           70 Public Relations                      204        2700
           80 Sales                                 145        2500
           90 Executive                             100        1700
          100 Finance                               108        1700
          110 Accounting                            205        1700
DEPARTMENT_ID DEPARTMENT_NAME                MANAGER_ID LOCATION_ID
          120 Treasury                                         1700
          130 Corporate Tax                                    1700
          140 Control And Credit                               1700
          150 Shareholder Services                             1700
          160 Benefits                                         1700
          170 Manufacturing                                    1700
          180 Construction                                     1700
          190 Contracting                                      1700
          200 Operations                                       1700
          210 IT Support                                       1700
          220 NOC                                              1700
DEPARTMENT_ID DEPARTMENT_NAME                MANAGER_ID LOCATION_ID
          230 IT Helpdesk                                      1700
          240 Government Sales                                 1700
          250 Retail Sales                                     1700
          260 Recruiting                                       1700
          270 Payroll                                          1700
27 rows selected.
SQL>
Cheers,
Suri ;-)

SB Audigy Value CMSS Successfully Enabled in Vista, if you call it CMSS

I've been trying to enable CMSS (at least hear sound from all of the 4 speakers) for a long time and finally successed but in a very strange way.
Steps written below are spesific to my system (SB Audigy Value, Onboard Realtek ALC 850) but can? work similar way on others i guess. For SB Audigy Value 6 Feb. Vista drivers are installed. U can use old XP drivers as explained in the forum too.
I've been using my onboard audio device (realtek ac97) since I can't enable cmss on SB Audigy Value, so Realtek AC97 audio drivers were installed on my system. You can download Realtek AC97 audio drivers? from [url=ftp://202.65.94.22/pc/audio/623_Vista_APO.zip">ftp://202.65.94.22/pc/audio/623_Vista_APO.zip[/url]
Download and install it (first enable the device from bios if you haven't)
After installing the drivers,
-) Open "Playback Devices/Speakers(Realtek A'97 Audio)/Properties" window and open "Enhancements" tab.
2-)There's a "Speaker Fill" effect there. U can take sound from all speakers if u enable it on Realtek AC97 device. And let's import this to our SB Audigy Value device. I say "Import" because i noticed that?"Enhancements" tab is actually a set of registry entries which points to some features from Realtek device. So,
3-) Open registry editor. Go to
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\MMDevices\Audio\Render\
Under the Render key the playback devices are listed as some numbers and letters like,
{50a7cf0-aad0-444c-a56b-ce655444d}
4-) U have to find your own device (realtek speakers) , for instance my device is represented by {50a7cf0-aad0-444c-a56b-ce655444d}.
(This is for Realtek ALC 850 model, may be different for other models?I guess)
5-) Under {50a7cf0-aad0-444c-a56b-ce655444d} key you can see "FxProperties" Key. Rightclick on it and export to a file. Save it as RealtekCMSS.reg for instance.
6-) Then find your SB Audigy Value Speakers device. (ES/LS whatever...)
Mine is {5ecbbccc-eca-446-aa2-a7390cf094f6}.
7-) Rightclick on it and select "Permissions"
Go to Advanced/Owner, and change the owner to administrators.
(Don't forget to select "Replace owner on subcontainers and objects)
8-) On "Permissions for {5ecbbccc-eca-446-aa2-a7390cf094f6}" window select "Administrators"
and select "Full Control" to allow. Then click OK.
9-)Close registry editor and open RealtekCMSS.reg in notepad.
0-) Replace {50a7cf0-aad0-444c-a56b-ce655444d}
????to {5ecbbccc-eca-446-aa2-a7390cf094f6} using replace function.
-)Save the file as SBAudigyCMSS.reg and execute it.
2-)Now go to
"Playback Devices/Speakers(SB Audigy)/Properties" and you'll see "Enhancements" tab.
3-)In "Enhancements" tab enable "Speaker Fill"
Open an mp3 and test your speakers. Other effects work too.
From now on you can disable your AC97 device from bios. But don't uninstall Realtek software.
Message Edited by atabrk on 04-26-200708:09 PM

The previous post is inaccurate:? CMSS includes many modes, which will work depending on the speaker configuration. This means that CMSS set?to ON on 5. speakers is not the same as CMSS on Headphones. The selection is done automatically, depending on your selected speaker configuration. For example CMSS on headphones uses HRTFs to produce the effect, while on multi-speaker systems it simply maps and pans the sound. From my experience, CMSS works?good on headphones, not only for games, but for music as well. It expands the soundfield, where on simple stereo and headphones you normally hear the sound inside your head. My opinion is, that CMSS sounds much better on headphones than on speaker systems.

Error while adding values to record

Hi, im trying to add values to a new record in a mdm qualified table, but im getting this error on the last line:
com.sap.mdm.internal.protocol.manual.ServerException: SQL error on UPDATE
on the last line.. could someone tell me whats wrong and how should be done please?
TableId requestLogTableId = repositorySchema.getTableId(Constants.TABLE_REQUEST_LOG_QUALIFIED);
FieldId dummyFieldId =     repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_DUMMY);
FieldId stepFieldId = repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_STEP);
FieldId actorFieldId = repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_ACTOR);
FieldId rollFieldId = repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_ROLL);
FieldId actionFieldId= repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_ACTION);
FieldId commentFieldId= repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_COMMENT);
FieldId dateFieldId = repositorySchema.getTableSchema(Constants.TABLE_REQUEST_LOG_QUALIFIED).getFieldId(Constants.FIELD_REQUEST_LOG_DATE);
//Create new record
RecordId recordIdRL = MdmCommandRecordDelegate.createRecord(conn, requestLogTableId);
//Manipulate record
Record recordRL = MdmCommandRecordDelegate.retrieveRecordById(
               conn, requestLogTableId, recordIdRL,
               new FieldId[]{dummyFieldId, stepFieldId, actorFieldId,
               rollFieldId, actionFieldId, commentFieldId, dateFieldId }, null);
//Set some dummy values
//recordRL.setFieldValue(dummyFieldId, new StringValue("Dummy 1"));
recordRL.setFieldValue(stepFieldId, new IntegerValue(1));
recordRL.setFieldValue(actorFieldId, new LookupValue(recordId)); // Previously created
recordRL.setFieldValue(rollFieldId, new QualifiedLookupValue()); //dummy
recordRL.setFieldValue(actionFieldId, new QualifiedLookupValue()); //dummy
recordRL.setFieldValue(commentFieldId, new StringValue("Test Comment")); //dummy
recordRL.setFieldValue(dateFieldId, new NullValue()); //How should a GMTime value be assigned??
//update values on record
MdmCommandRecordDelegate.modifyRecord(conn, recordRL);
I'll appreciate any help.
Regards
Julio Herrera

Hi,
I am facing problem in passing a value to a lookup field in main table while creating a new record.
Can you send me the code on how to search lookup table for a perticular record and pass the value to setFieldValue method.
Thanks
Vijay

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit

Hello all,
Im experiencing a severe sound jitter and random "clicks" in windows 7 when playing music and using the computer for browsing.
I didnt notice this problem before because i used to keep my computer idle while doing other stuff when playing music.
the sound plays as if it "slows down" or something when doing random activities on the computer
My setup is
Intel Core 2 Duo E6550
4GB DDR2 800 MHZ
Creative Sound Blaster Audigy Value/SE
Windows 7 64BIT
Gefore 8880GT
I use winamp for playback.
Im using the latest drivers from the creative site.
Is there anything I can do?
The sound so

Thanks for the reply jmacguire.
I'm using default values: 6 bit, 48000 hz (DVD Quality)
Which one do you recommend with the SB Audigy SE?
The sound distorts when listening music in youtube or other flash webpages, both in normal and in HQ settings.
I have tried almost everything. I think the drivers downoladed for Windows 7 works better.
Then the Autoupdate function downloaded some new drivers (version .0090 I think) and it screwed up the sound on the web.

SB Audigy Value card Conflict with Modem re-booting my

My PC using Intel D95GAV M/B, 3.2GHz with XpSP2. On-board sound ok. Recently installed SB Audigy Value card. It is working perfectly. But with that card I can't use any modem function, any time if I dial or connecting to Internet or Outlook my PC gets re-boots. I already disabled on-board audio. different PCI slot tried. Then I replaced the Audigy card. Replaced the Modem. Audigy Value card tried with another 3 PCs. all are facing the same problem.
Please Help me!
4S7MD

Unfortunately if you read the release notes for the Vista compatible driver it tells you not to use it on your particular sound card ;(?http://us.creative.com/support/downl...rtype=&x=2&y=7?Notes:
DO NOT?install this driver for Sound Blaster Li've! 24-bit, Sound Blaster Audigy LS, Sound Blaster Audigy SE, or Sound Blaster Audigy Value.<However when you tell the site you have an Audigy Value card it directs you to these incompatible drivers
go go Creative

Windows 7 can use Graphic Equalizer? (Audigy Value)

Hi, i'm new user?
now i use sound blaster audigy value but driver in cd driver not support windows 7 (Bluescreen)
and i want to use graphic equalizer, please help me?
Message Edited by materialise on 03-28-2009 05:03 [email protected]

Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.

Help on Audigy value soundc

Hi,
I just bought the Audigy value soundcard, but when I installed it using the drivers provided in the CD. My windows volume control is displaying chinese characters instead of english, also the creative surround mixer display ? instead of the proper words(guess it cannot decode the chinese wordings). Anybody knows how to fix this problem? thanks?[IMG"]http://i29.tinypic.com/2vbrbec.jpg[/IMG]?[IMG"]http://i28.tinypic.com/6ep7cp.jpg[/IMG]

int i = Integer.parseInt(x);
Will convert the String to an integer.The original poster was looking for a way to convert a single digit in a string to its numeric value, not to convert the whole string to an integer.
I forgot to mention that this is contained in the
java.text package, so you will need to
import java.text.*;Integer is in the java.lang package, so no import is necessary.

Audigy Value, 24-bit + 96kHz suppo

Hi, currently I am using Creative Audigy Value and Windows Vista Business. http://www.creative.com/products/pro...05&product=489As it said, it should support 24-bit / 96kHz. It work really well in Windows XP. However, no 96kHz option can be found in Windows Vista.
The driver that I used is downloaded from Windows Update.(Ver. 5.2..200, release on 2/4/2007)
Or ...should I update it via Creative web? Thanks~!
Ben

I reccomend using the ones from Creative's website, on my Audigy SE it allowed 96kHz capability.

Audigy Value Delay Recording Prob

Similar Messages

Maybe you are looking for