Audigy WORKING with 5.1 AND software(EAX, THX console, bass redirection) Vista 32
This has taken me a week of fiddling, but now on Vista Ultimate 32bit I have most things up and running...
EAX effects and environments from the control panel work, THX console works, surround mixer, speaker settings work..Also I'm getting proper surround output =]
This isn't a complete fix; EAX console and the EQ don't work, and also it only lets me set 6bit@96khz in the control panel, 24bit isn't there =[
I'm using an Audigy 4...
First, I installed creative official vista drivers. Then uninstalled the drivers but left audio console installed.
Install Pax-Apps 2.32sp2 http://www.youp-pax.org/viewthread.php?tid=443&extra=page%3D
Reboot...now my audigy was not working here but all the creative apps were installed. THe youp-pax drivers caused a BSOD after the reboot but after another reboot it went into windows just without the sound working.
Run the Pax installer again, select remove drivers and remove them but leave the software, reboot.
Install the official Creative windows XP drivers. This is the hard step, I had some problems and had to reboot and uninstall-reinstall about 0 times before I finally got it working...but now it works.
Still, I want my 24bit and my EAX console =[
I have this (well kinda) problem also. Sometimes my system (see below) will work fine, but then suddenly the channels will swap or the sub just won't give any bass.
Have tried contacting both Creative and Microsoft support for some insight but nothing apart from the standard stuff so far. I guess its a vista/4Gb RAM issue. Looking forward to using WaveRt drivers in case they give a difference.
Thanks,
Mith,
Gigabyte P35 Mobo
4Gb 800Mhz RAM
Vista Ultimate 64-bit (with SP RC)
Creative X-fi Xtreme Music
Core 2 Duo (6750 @ 3.2Ghz)
Message Edited by Mithias on 03-7-2008 04:4 AM
Similar Messages
-
Can't get Desktop Software configured properly to work with Outlook 2007 and Blackberry 8703E
I have a Blackberry 8703E and I have Outlook 2007 on my laptop. I keep trying to install the Desktop software but don't know what option to choose, how to configure it to recognize Outlook, etc. My goal is to be able to sync my contacts, appointments, tasks, etc. between the laptop and my Blackberry. I have no clue what I am doing or how to install and configure the software to work.
Also, I am going to uninstall the Desktop software and want to know what the link is to download the most current version that will work with my phone and my laptop (running Vista). I do not subscribe to the Blackberry service but only want to sync between my computer and the phone.
PLEASE HELP! I am not knowledgeable in this stuff and any detailed instructions would be greatly appreciated!
Thanks a bunch!
Wade RearicDon't know if you got your answer by now, but thought I'd try to help.
First, let me preface by saying I use Vista, not XP, but my Outlook is 2007.
Next, you need to be careful as to which versions of the software you use both (a) on your Blackberry desktop and (b) on your Blackberry itself. For example, I use the 8703e via Verizon, but so far the phone's software only goes up to 4.2, which is two iterations short of Blackberry's latest smartphone software. Why do they do this? Because they typically introduce the new software via a new phone via an "exclusive" with a certain carrier, leaving all other users to either salivate or switch to the "exclusive" carrier. Over time (6 months to a year) the "new" software may get rolled out to patient users with (by then) "older" phones, but they clearly want to incentivize consumers to just upgrade to new phones via special carriers.
As for the Desktop software, it is easy to get tripped up here, as Blackberry's download site in not very intuitive for this. Your problem could be that you downloaded and installed a Blackberry Desktop Software that is too advanced a version for your phone. (To add further confusion, the desktop software tends to have version numbers similar to the the phone software, such as "4.2.")
Bottom line: call your help number of your carrier to get the correct info for both sets of software for your phone.
Once all the right software/drivers are installed, the Desktop interface si fairly user-friendly. From a few choices you can backup your Blackberry data; synchronize it (if you are not already doing that wirelessly), etc.
Hope this helps. -
Working with AVCHD: Log and Transfer FAQs
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information. -
Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime
Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
AbbasHello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR -
How do I install OS X Mountain Lion in a machine that came with OS X Yosemite already?? I need to do it in order for me to keep working with some of my softwares with are very expensive and can't afford to buy new versions.
Parallels
VirtualBox
VM Fusion -
Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6
After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
ThanksBlue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the
Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.
-
Crystal Reports Version to Work With Vb 6 and VS 2008
Hi,
We have some legacy VB 6 applications which are too large to port over to Visual Studio which use Crystal 7.0
Recently at one site there have been problems with another application which uses a new version of Crystal. Either one or the other will work but not both. This might be solved by ugrading to Crystal XI R2 ( I believe that newer versions can run side by side). However, we also have new projects starting that are to be developed in VS 2008. As I understand it, Crystal XI R2 will not work with VS 2008 and CR 2008 will not work with VB 6.
We really donlt want to have to buy both versions !!
Anyone got any ideas ?
Many Thanks
PaulCR 7 did not support side-by-side installs. Likely what is happening is the your app and the other app is loading crpe32.dll from the \windows\system32 folder. Which obviously will not support each other. This is the only dll that is common among all versions of CR, see below for more info, and that due to it's location can cause issues like this. Newer versions from 8.5 do version checking and athough the dll's have the same name XI R2 will not load other versions, there are exceptions. The exceptions are UFL and some legacy database drivers that will work in any and all versions.
A few possible work arounds, in your app do version checking when loading crpe32.dll or specifically if crpe32 is residing in a memory space that some other app has loaded it and Windows will share, check the version of the dll and if in your case it's not 11.5.x.x. then pop up a message indicating they must close the other Crystal app before continuing.
Move all the runtime files into the applications startup folder, what's specified in the Icon on the your desktop or short cut. Moving them there may fix this, we start looking for our runtime where your EXE is located and then in the working Folder, then in the \system32 folder and finally down the PATH statement. We also have hard coded specific location in our load methods. In this case you may have to rename the \windows\crystal folder from the CR 7 install. But I don't recall if this will break the CR 7 app.
Also if you are moving the version 7 runtime or the other app it may break that application so make note what you did so you can restore it. Also highly suggested to back up everything and test this on a test machine before applying to the production PC's.
You can use tools like Filemon and modules from our site. You can get filemon from www.sysinternals.com.
Other than that it will not likely work due to 7 not supporting side-by-side and will load anything it finds. And of course, Don't support or install both versions of software on the same PC. -
ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work. How can i get this software in a downloadable format? is it actually free - I'm assuming it is... Hope someone knows the answer to these questions...
The download itself is free and is valid for 30 days only. After that, the software ceases to work.
CS4 is pretty old, no longer sold and no longer supported by Adobe. It's also not compatible with many modern OSes.
Why do you have to work with such an obsolete version of Photoshop?
What kind of "designer" uses it? -
my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
Does the 932C HP printer with 2 sided printing accessory work with window 7 and office word 2010?
(model#C6463A-double side, printing accessory), for the HP 923C printer? Is it real slow printing? Does it flip by itself or do I have to flip it? Also will the printer with the accessory work with windows 7 and office word 2010 to type 4 pages per sheet, like a book? Thanks and please help me!
Hi @Happyforhelp
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Deskjet 930/932c Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
HT1338 My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?
My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?
It's supported. Open System Preferences > Print and Scan, press + button and press your printer
-
Quite a few of my addons don't work with firefox 6, and I would prefer to keep them, but my pc crashed and I had to reformat. I don't want to have to go on a 3rd party site, since they could easily put a virus on my pc. I couldn't find anywhere to download it on the site.
Thanksftp://ftp.mozilla.org/pub/firefox/releases/4.0.1/
Just keep in mind that Firefox 5.0 was a security release for 4.0.1. -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.
Maybe you are looking for
-
hi
-
Can't access part of an external drive
Hi I have an external drive plugged into my Mac and, today, I've not been able to access just one folder with the drive. I ran Disk Utility and it told me the drive was damaged and could not be repaired without reformatting. I'm keen to recover the d
-
Hi, I am given below the list of fields related with Materials. TDID - Text ID TDSPRAS - Language Key TDFORMAT - Tag Column TDLINE - Text Line These fields I find the table LTX1_TMP. I need to know in which materila view these fields exist ? Thank
-
How to check agent in windows server
The database I am working on is running in windows remotely - I got the error that agent is NOT responding so rman job soandso_weekday suspended on agent unreachable. in unix - it was just a command - emctl status agent - after logging in server - I
-
How to make a simple image gallery with click through?
Hello, I'm wanting to make a webpage that showcases some images, very much like this one : http://www.steviedance.com/?page_id=3868#1 I want button where you can click to the next image, and have only the next image load, not the whole page like