Audigy2 NX USB on dual-core system - crackling + skipp
I have an Audigy 2 NX (USB) SoundBlaster which was working perfectly until I upgraded to a dual-core Athlon X2 4200+. Now I get not just crackling, but skipping - MP3s play at 2-3 times the normal speed, missing out big chunks. I'm using USB 2.0. It's definitely not a problem with the USB controller on the motherboard because I get the same if I plug it into an Adaptec PCI USB controller.
Some observations:
) Disabling USB 2.0 support in the BIOS (falling back to USB .) doesn't fix it.
2) The skipping only happens for applications using WinMM. DirectSound is fine. This suggests the USB is OK but the Audigy drivers are somehow confused by the multiprocessor setup. I tested this using WinAmp with waveOut / DirectSound output.
I'm guessing Creative needs to add multiprocessor support to their drivers.Message Edited by mjarga on -28-2005 08:46 AM
I did find a solution - but it sucks.
. Uninstall your Audigy NX drivers
2. Disable USB 2.0 support in your BIOS
3. Reinstall the drivers from the original CD (not the new ones from the website).
Creative tech support were not very helpful:
"What it sounds like is that you may be having a bus issue between
Windows and your Computer
What I suggest is trying the SID656 This should help with the issue."
Eventually found out that SID656 is a knowledge base article on tuning your PCI card's performance. Great.
Similar Messages
-
What brand DVD burner in G5 Dual Core
System tels me HL-DT-ST DVDI think that's made by LG.
-
hey guys,
Is there a way to enable dual core processing within java? I have got my hands on a dual core system and find that cpu intensive tasks use a maximum of 50% (im assuming its only using 1 processor). Is there a way to enable it to use both at the same time?
Thanks in advancepublic class Spin implements Runnable {
public static void main(String[] args) {
int threads = 2;
if (args.length > 0) {
threads = Integer.parseInt(args[0]);
for (int i=0; i<threads; i++) {
new Thread(new Spin(),"Spin " + i).start();
public void run() {
for(long i=0; i<10000000000L; i++) {
if (i % 10000000 == 0) {
System.out.println("Thread \"" + Thread.currentThread().getName() + "\" is on iteration " + i);
}Test your system with the above Java. Compile the above class and run it. By default it will use 2 threads. If you want to try more threads, pass the number of threads as an argument.
java -cp . Spin 4
After running the above, does it use all your cores? -
MSI NEO4 Platinum + DUAL CORE detection problem after soft reboot
I just build a new AMD dual core system (4800+) and it consistently fails to detect the second core after a soft reboot from windows Xp. The MSI NEO4 Platinum came pre-flashed with the latest bios version 1.B. If power off or use the reset button I can consistently get it to detect both processors. Anyone else having this problem? Or know of a solution?
Thanks.Hi, I did a upgrade from a 3200 venice to a Opty 165.[This is a different situation than your new build] I deleted the uniprocessor ACPI from the device manager before I removed the old cpu. It was a bit weird for me in that at first the bios saw it as a 165 dual core then the next time it would come up as single core. It went back and forth a few times between single and dual core in bios. I tinkered with a few things in the bios but not really sure if it helped but it eventualy stayed as dual core in bios and showes as dual core in windows. I have my MPS table version set to 1.4 in bios [ but it was this before change in cpu] also my IOAPIC is now greyed out [unable to change it, but it wasn't before] - both these are in Advanced bios features. In power management I have the ACPI standby state set to auto. Hope some of this might help you.
-
Dual Core Center working in Vista but not XP on a dual boot system?
Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.have you try to update/install the dual core driver from amd?
-
USB Memory Stick won't work on my Dual Core Intel Mac...
Just bought a 4gb memory stick a few days ago - it doesn't seem to like my Dual Core Intel Tower at all. I am plugging it into the USB slot at the front and trying to copy a load of files onto it.
It's got around 1gb on it now and I can't seem to copy another single file onto it. I was copying folders of files, but just trying to copy a single file the finder seems to hang and I can't cancel the copy process - I have to hold the power on button to regain control of my Mac - is this normal??
The stick works perfectly on a PC...
Disk Utility reports no problems, and reformats OK.Be sure that the memory device is not NTFS formatted. You need to use FAT32 else MacOS Extended for it to work.
-
My Mac has Operative System MAC OS X Version 10.6.8,processor 2x2.66Ghz Dual core Intel Xeon. Is this compatible with Photoshop 5.5 or 5 and how can I get it in Bogotá, Colombia or can I download it ?
CS5 and CS5.5 are no longer sold. You can either buy CS6 or the subscription to CC. System requirements | Photoshop
Benjamin -
What operating system can I upgrade my 2006 MacBook Pro 17" inch to if it has a 2.16Gh Intel dual core and 2G ram?
A Core Solo or Core Duo Mac can go to Mac OS X 10.6.8. A Core 2 Duo or better can go to Mac OS X 10.7.2.
(63169) -
What is the operating system available for Macbook Dual core Intel processor system
what is the operating system available for Macbook Dual core Intel processor system
Exactly what model? Do you really mean the old MacBook with the dual core processor or do you mean one using a Core 2 Duo processor?
The last OS X that runs on a dual core Mac would be:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply. -
I have tried to install 10.6 and when install is complete it says restart. The computer restarts but keeps coming to a gray screen with a small black box that says to restart. The processor is 2 x 2.66 GHz Dual Core Intel Xeon with 2 GB of memory. This should be more than adequate. Any ideas? Has anyone encountered this before? I had to restore 10.5 from Time Machine.
Your sig line says iMac, but TMK no iMacs were ever made with 2x2.66 GHz processors. Is this a Mac Pro you are installing on? Are you using a retail Snow Leopaard DVD?
-
I want run 2 2.7GHz Dual-Core Intel Core i7
8GB 1333MHz DDR3 SDRAM - 2x4GB
750GB Serial ATA Drive @ 7200 rpm
Would it be worth while or better to get a full spec i7 quad core serverJust go for the > Mac Pro - Apple Store (U.S.) instead.
-
Dual Core, but just one recognized [SOLVED]
In the last days I had problems with my computer just going off randomly after some time... As I found out the CPU fan was too loose... Now I somehow fastened it so it seems to work normally now.
Today I noticed (I'm not sure whether it's now the first time or I just didn't see it) that on booting I see just one Arch logo, although I have a Dual Core processor and normally there are 2 logos... I checked whether GRUB has the option nosmp set which was not the case. cat /proc/cpuinfo gave me just one core.. Then I tried to boot the arch live cd (the 2008.06) and cpuinfo had both there!
The BIOS says that there are still 2 as well... so my first idea, that one core is broken because of overheating seems to be wrong, it's impossible that just one core breaks, doesn't it?
So my question is - how do I get my core to be recognized again? I have the new 2.6.29 kernel.. could this be the problem?
My second question is - the information about launching daemons on booting appears AFTER showing the login prompt (I login via tty) [EDIT: This had to do with the OpenNTPD daemon...]
Last edited by icetonic (2009-04-16 15:46:27)Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffc0000 (usable)
modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
modified: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff24000 - 7ffafb9e
Allocated new RAMDISK: 00011000 - 0009cb9e
Move RAMDISK from 000000007ff24000 - 000000007ffafb9d to 00011000 - 0009cb9d
ACPI: RSDP 000FB800, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP 9000706 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFC05C0, 659A (r1 A0904 A0904000 0 INTL 20051117)
ACPI: FACS 7FFCE000, 0040
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97)
ACPI: SLIC 7FFC0440, 0176 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97)
ACPI: HPET 7FFC6B60, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97)
ACPI: SSDT 7FFC6BA0, 0206 (r1 A_M_I_ POWERNOW 1 AMD 1)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 005ac000 - 005b2f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a8584] TEXT DATA BSS ==> [0000100000 - 00005a8584]
#4 [00005a9000 - 00005ac000] INIT_PG_TABLE ==> [00005a9000 - 00005ac000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000009cb9e] NEW RAMDISK ==> [0000011000 - 000009cb9e]
#8 [00005ac000 - 00005b3000] BOOTMAP ==> [00005ac000 - 00005b3000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c0431600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015
Kernel command line: root=/dev/disk/by-uuid/206cc51d-0ece-4693-a6cc-156428ba637f resume=/dev/sda5 ro vga=792 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2109.362 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073012k/2096896k available (2369k kernel code, 22620k reserved, 1056k data, 356k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045f000 - 0xc04b8000 ( 356 kB)
.data : 0xc03507cf - 0xc0458a88 (1056 kB)
.text : 0xc0100000 - 0xc03507cf (2369 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.50 BogoMIPS (lpj=7031206)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI Error (dswload-0239): Invalid type (Alias) for target of Scope operator [\._P] (Cannot override) [20081204]
ACPI Exception (psloop-0227): AE_AML_OPERAND_TYPE, During name lookup/catalog [20081204]
ACPI: setting ELCR to 0200 (from 8c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4220.50 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 08, should be 03 [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0xa30-0xa37 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f could not be reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x2000-0x207f has been reserved
system 00:06: ioport range 0x2080-0x20ff has been reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb80000-0xffffffff has been reserved
system 00:06: iomem range 0xff300000-0xff3fffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x230-0x23f has been reserved
system 00:0b: ioport range 0x290-0x29f has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xe000-0xefff
pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 558k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1239902785.206:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 18 for MSI/MSI-X
vesafb: framebuffer at 0xdd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b470
vesafb: pmi: set display start = c00cb4d3, set palette = c00cb52e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 15
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 15
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
loop: module loaded
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdbfff000
Driver 'sr' needs updating - please use bus_type methods
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:07.0: setting latency timer to 64
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.103
usb 1-4: new high speed USB device using ehci_hcd and address 2
input: PC Speaker as /devices/platform/pcspkr/input/input4
lp0: using parport0 (interrupt-driven).
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:fc:c3:29
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
usb 1-5: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
Error: Driver 'pcspkr' is already registered, aborting...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
HDA Intel 0000:00:05.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64<6>wlan0 (rt73usb): not using net_device_ops yet
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usb 1-4.3: new high speed USB device using ehci_hcd and address 5
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
usb 1-4.3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:0334)
input: USB Video Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3919820k swap on /dev/sda5. Priority:-1 extents:1 across:3919820k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
rt73usb 1-4.1:1.0: firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:14:7f:83:b1:bb
wlan0: authenticated
wlan0: associate with AP 00:14:7f:83:b1:bb
wlan0: RX AssocResp from 00:14:7f:83:b1:bb (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
IRQ 11/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs -
PCIe Slot Speeds - G5 Dual Core 2.0
Hi Gang
I've been in touch with FirmTek support about a possible conflict - irregularity with regard to a SeriTek/2ME4-E installed in slot number 3.
They're claiming;
"The PowerMac G5 Dual Core PCIe slots 2 and 3 share bandwidth. If you install a fast card in slot 3 and a slower FireWire/USB card in slot 2, the bandwidth of both slots is reduced to the speed of the slowest card. This improper configuration could easily cause the issues you are experiencing."
Unless I'm missing something, according to this diagram, I believe slots 2 & 4 share the same bandwidth? Or it would appear that the MIDDLE PCIe slot is the faster of the two others - yes?
http://www.locationstudio.net/PCIe%20Speeds%20G5%20Dual%20Core.jpg
And here's what I have installed;
http://www.locationstudio.net/Slot-3-PCLe.jpg
I'm still leaning on replacing the SeriTek/2ME4-E with a Multi-Port FW800 card, since my other drives are all connected via FW800. Can't take the chance of having additional data corrupted or deleted.
Thanx for your thoughts
MikeAnother consideration:
The Firmtek controller can accommodate (max with no allowance for overhead) 384 MB/s bandwidth, but a FW800 controller can only accommodate max with no allowance for overhead) 98 MB/s.
As well, with a bit of research on the HyperTransport link which connects the Mid Bridge to the North bridge, I found an interesting comment in a HyperTransport Technology Consortium document which suggests that I/O devices of high latencies (slow) can have a dramatically adverse effect on the overall performance of the bus
A problem relative to...the presence in a system of a very slow I/O device that is the target of posted requests. This situation can cause other registers in the system to experience *large and unpredictable latencies*.
This seems to support the, albeit poorly phrased, claim by Firmtek that the combination of the devices may be the source of the issue.
This is interesting stuff (says the geek in me). More reading.......
Further reading of this document continues to peak my interest and provide further support to the claim from the Firmtek rep:
http://www.hypertransport.org/docs/twgdocs/HTC20031125-0035-0009.pdf
A Ha! Firmtek specs stipulate that the card is PCIe 4x:
http://www.firmtek.com/seritek/seritek-2me4-e/spec/
If I suggested otherwise, my apologies!
Message was edited by: japamac
Message was edited by: japamac -
Hey guys.
Seems I have the same problem as the OP. Everything on the system says that dual core should be working, ACPI multi installed etc but only 1 core in task manager. Im going to try roll back the bios because the dual core was working before I flashed it. Thing is I only have the MSI download version of 7252v31, which apparantly needs to be used from a dos enviroment, hence needing a boot floppy to construct a ramdrive etc..(I have no floppy drive).
The 7252 v3.60 latest driver has a little MSI install program to let you install through windows (MSISetup.exe). Is there a way of installing 7252v31 through windows, or can i just use it through a dos window in XP.
If anyone can maybe link me to a windows installable version of the last bios update before 3.60 (which is possibly the update that has caused this problem) I would be most grateful.
Also, will I have to go in and reset the CMOS manually?, or should the update program clear it for me (as it appeared to do when I installed 3.60 with the MSI exe).
Thanks very much for any help this is driving me nuts.
PS: Yes I am a very bad person for flashing my BIOS when i didnt need to. Lesson learnt.
K9NGM Mainboard
AMD 64 X2 Dual Core 4200+
Windows XP SP3You can find it here:
ftp://duser:[email protected]/MB%20BIOS/7252v3x
You can use >>Use the MSI HQ Forum USB flasher<<
P.S: Next time please open new own topic. Topic split-ed. -
AMD dual core 64 X2 and Opteron 1**; what motherboard.
Hi to everybody, my name is Mauro and I am Italian. I have had for many years a lot of mobos MSI that are shown always reliable and with really excellent utility. An example the LiveUpdate that unlike utility of other brand is very comfortable and reliable. Currently I have a system AMD 64 X2 3800+ stepE4 with Asus A8N SLI Premium and memory RAM G.Skill PC4000 (chip Samsung UCCC) F1-4000USU2-2GBHZ PC4000. I have many problems of stability and I would want to return to the brand MSI. I use the PC as Workstation I am not interested to the SLI and I would want soon to pass to the CPU Opteron 1 * * dual core. The customer care G.Skill has reported that the brands of reference for the development of the forms are the MSI and few others. You would know me to suggest a complete mainboard in the endowments, silent and compatible with the CPU from me you quote. How VGA I have both chip ATI X700 Silent Pipes 256Mb or NVIDIA 6600 always silent pipes 256Mb. I am not interested to overclock. I am observing with attention the RD480Neo2 and other mobo with chipset NForce Ultra K8N Neo4 Platinum. Thanks for your share and suggestions.
MauroQuote from: Steve F. on 11-January-06, 03:04:05
Skippy, that's changing fast. Probably most major manufacturers are now explicitly supporting the Opteron.
Even MSI is getting there: K8N Diamond Plus
Hi,
To a careful study I have discovered that perhaps my Asus A8NSLIPremium has a problem that Asus is resolving. However I have asked to one friend of mine to make a will the MSI K8N Diamond Plus; in Germany it is already available some exemplary. The fact that the development has been made really with the Ram DDR that I have purchased (the G.Skill PC4000) it is a very important factor for the stability of a system. You introduces then with a good section of feeding to 4 phases it is very important. Certainly I am not interested to the characteristics of overclock but a Ferrari is not purchased only for racing. I have not told you that in so many years I have almost always had 2 brands that have always guaranteed me reliability: Abit and MSI. Objectively now that have tried also a lot of Asuses (5) I are not fully satisfied. For instance the Utility: LiveUpdate2 gave me reliability in the update of the bios (operation that finishes in DOS); the utility AsusUpdate because of a bug in the summer '05 are cost me 3 MB (update that departs in auto and it finishes in Windows). Resulted not could remain without MB I have had to purchase other identical MB. And treating itself of corruption of bios no guarantee. I have also discarded Tyan because it accepts only certified RAM DDR and their support it doesn't guarantee the operation with my DDR G.SKILL. Now that are in game I don't sell certain the DDR!
Mauro
Maybe you are looking for
-
Problem with transient attribute attach to standard vo from the controller
Hi all, I attached two transient attributes to the standard vo through controller. Then i passed values to these fields from controller based on another field in the standard vo. I created two columns in the table without given the view instance and
-
Hi everybody I want to create some text box on my form dependent on selected option from my combobox . what should i do ?
-
A web page I frequent uses this player and plays every darn time I visit the web page and it drives me nuts. How do I get rid of the player short of not visiting the web site.
-
Hi, I´m using I´m using BPEL Process Manager 10.1.2 Beta-3. I´m running my bpel process and in some point have the next exception: [2005/07/31 14:40:56] "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown. Less <bindingFault x
-
IOS5.0.1 still no fix for podcasts
Despite probably several reports from myself and others to Apple feedback, nothing seems to have been done do address the problems that have been created since Apple decided to change the format of the music player on the iPad in iOS5 as far as podca