Audigy2 Value_Can't execute driver service or load AsmiHwIo.

When I installed?my Audigy 2 Value sound card I got these two messages at desktop:
Can't Execute Driver Service
Cant Load AsmiHwIo.dll
I then updated the driver with SBAX_PCDRV_LB_2_8_000.exe
It seems to be working from what I can tell.
? Jim

Thanks for the reply.
I found out that the Asus Probe was the main culprit in reguards to my specific problem but I
do intend to remove the old drivers and reinstall the new ones to resolve some other issues.
? Jimato

Similar Messages

  • Audigy2 ZS with Beta Driver (11 Aug 20060) in Windows Vista RC1 does not w

    I recently updated my Windows Vista to RC build 5600 (32 bit) and although my driver seems to load properly, windows does not recognize my Audigy2 ZS sound card. I had Vista build 5536 and everything worked perfect...clear sounds, no errors, etc, but with Vista RC, the sound card does not work at all. I have dual boot, and when I boot back to XP, my sound card works good.
    I've tried loading the drivers in safe mode.
    Any suggestions, or will Creative be releasing a new beta build?
    I know that as part of beta testing, these issues come up, but if anyone has gotten their drivers or Audigy2 ZS to work, I could use some guidance and suggestions.
    Thanks,
    Mike

    Hi to all,
    I want to make some corrections about the test with BF2. I noticed that even with hardware as the only solution Ultra or less I have only 2. speaker sounds. I played the demo Flight Simulator X and worked well. I have 2. sounds on the speakers when I set up to 7.. When I changed to 5., I did have 5. sounds on the speakers. BF2 graphics are good. However, it sounds that the current Creative drivers are not fully compatible with BF2. It seems to be ok with Flight Simulator X demo. This game is made for Vista. I think that can be one of the reasons. I have not checked any other games. As Creative said, the drivers are not good for 6. or better. I think by January 2007, they will be all right. It would be worse no sound at all.
    Take care all,
    Medico

  • Apple mobile device DRIVER does not load/ is not installed

    this is what my itunes diagonstic says concerning connectivity tests
    Microsoft Windows 7 x64 Ultimate Edition (Build 7100)
    Hewlett-Packard HP Pavilion dv2700 Notebook PC
    iTunes 8.1.1.10
    QuickTime 7.6
    FairPlay 1.3.6
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    *Apple Mobile Device 2.4.1.7*
    *Apple Mobile Device Driver not found.*
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 88107370E6DED672
    Current user is not an administrator.
    The current local date and time is 2009-05-16 00:21:13.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.1.1.10 is currently running.
    iTunesHelper 8.1.1.10 is currently running.
    Apple Mobile Device service 2.12.36.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number:
    i found it out that the apple mobile device is running yet there is no driver that is loading so that it can recognize my iphone
    any suggestions on how to get the computer automatically to search the driver in the system32/drivers folder?
    i already tried downloading the driver and copying into the folder and doing restart
    i've also tried to reinstalling itunes and i used winrar to extract the applemobiledevice support and repaired but it didn't do anything
    are there any other suggestions?

    Sorry, I should have qualified that: in the past I have given dump/debug/log details to people in the 'Windows' world to try to solve problems that I've thought have needed immense details to resolve but since owning a Mac I have discovered that if I am thinking at that level of detail then I have lost the real plot and my pulling back and looking at things simply again has been an eye-opener, hence my suggestion in response to your question to simply 'get a Mac'.
    Part of the 'issue' with Windows seems to be its varieties and variants (Windows 7 x64 Ultimate Edition (Build 7100), for example) and the range of various and variable hardware on which it can run, too often with random and non-deterministic results, not to mention the almost limitless and unnecessary combinations of user-configuration options and requirements!
    Seriously, get a Mac if you are into the Apple world, even on the periphery, if you want an easier life (in my experience).
    Good luck with your 'issue'.

  • Error while executing the service - The service method not defined error

    Hi,
    I am using Oracle UCM Content server 11g. I have created a custom service using component wizard. I have provided class name and method correct in the service declarations. The method should return manipulated Revision Label value. I am executing the service as a direct service and not subservice from a resource file using the following command.
    <$executeService("servicename")$>
    The serice is getting called but I am getting the following error log
    Event generated by user 'weblogic' at host 'localhost:16200'. Unable to execute service Edit_Revision_Label and function generateRevLabelInfo.
    The service method 'generateRevLabelInfo' is not defined. [ Details ]
    An error has occurred. The stack trace below shows more information.
    !csUserEventMessage,weblogic,localhost:16200!$!csServiceDataException,Edit_Revision_Label,generateRevLabelInfo!$!csMethodNotDefined,generateRevLabelInfo
    intradoc.common.ServiceException: !csServiceDataException,Edit_Revision_Label,generateRevLabelInfo!$
    *ScriptStack Edit_Revision_Label
    Edit_Revision_Label,dDocName=3:generateRevLabelInfo,dDocName=
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
    at intradoc.server.Service.buildServiceException(Service.java:2260)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
    at intradoc.server.Service.createServiceException(Service.java:2249)
    at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1766)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1716)
    at intradoc.server.Service.doAction(Service.java:477)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
    at intradoc.server.Service.doActions(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3866)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
    at intradoc.server.Service.executeServiceEx(Service.java:3861)
    at intradoc.server.ServiceRequestImplementor.executeSafeServiceInNewContext(ServiceRequestImplementor.java:1231)
    at intradoc.server.Service.executeSafeServiceInNewContext(Service.java:3856)
    at intradoc.server.script.ServiceScriptExtensions.evaluateFunction(ServiceScriptExtensions.java:269)
    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
    at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)
    at intradoc.server.Service.buildResponsePage(Service.java:1267)
    at intradoc.server.Service.doResponse(Service.java:2076)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
    at intradoc.server.Service.doRequest(Service.java:1890)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
    at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
    at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
    at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
    at sun.reflect.GeneratedMethodAccessor1173.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
    at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
    at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: intradoc.data.DataException: !csMethodNotDefined,generateRevLabelInfo
    at intradoc.server.Service.doCodeEx(Service.java:561)
    at intradoc.server.Service.doCode(Service.java:505)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
    at intradoc.server.Service.doAction(Service.java:477)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
    at intradoc.server.Service.doActions(Service.java:473)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1323)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3867)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
    at intradoc.server.Service.executeServiceEx(Service.java:3862)
    at intradoc.server.ServiceRequestImplementor.executeSafeServiceInNewContext(ServiceRequestImplementor.java:1231)
    at intradoc.server.Service.executeSafeServiceInNewContext(Service.java:3857)
    at intradoc.server.script.ServiceScriptExtensions.evaluateFunction(ServiceScriptExtensions.java:269)
    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1227)
    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
    at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)
    at intradoc.server.Service.buildResponsePage(Service.java:1267)
    at intradoc.server.Service.doResponse(Service.java:2076)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
    at intradoc.server.Service.doRequest(Service.java:1890)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
    at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1346)
    at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
    at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
    at sun.reflect.GeneratedMethodAccessor1173.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
    at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
    at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Please let me know the suggestions and the resolution on the above issue
    Thanks in advance,
    Sarang

    Hirva wrote:
    Trying to get access to the sun convergence we get this error
    "Error while executing the service request : : Login to Mail Service failed " after a look around we found out that the problem was that some one had deleted the msg-admin-server user from the ldap.What else was "accidentally" deleted? Do you have audit logging enabled for Directory Server?
    but still doesnt work? where else should we look?Messaging Server also creates a msg-admin group ("cn=Messaging End User Administrators Group") which is used for Directory Server ACI purposes. You can see the entries that Messaging Server added during initial configuration by reviewing the *.ldif files under the following directory (MS7.0 32bit):
    /var/opt/sun/comms/messaging/install/Regards,
    Shane.

  • Hard-Drive not Detected load sata drivers

    Hi everyone I have a G6-1189sa notebook, I had a faulty harddrive so replaced it with the exact same drive 750GB WD, Thing is I could not save anything from the original drive ? so no recovery partitions are anything I even lost all my family photos and software.
    Ok so I done a straight swap over and went ahead installing my fresh Windows 7 x64 disk, then I got an error message saying no device detected please install driver etc etc.
    I know I need to install the sata driver for the harddrive to be detected, so I extracted the HP sata control driver to a USB pen the tried to load the driver, with the load driver option on the install disk.
    Error message saying driver is not signed !!!!   So after some reading on google I learned I had to disable the naitive sata option in the bios settings for the harddrive to be detected.
    Thing is there is not a option for this in my bios ?  unless Im missing something like an advanced bios setting.
    I even went to the Intel site and tried some of there drivers but I get the same error message driver not signed.
    So my question is ? how can I disable the native sata option if Its possible , If not how can I load the HP sata driver if its not signed.
    Its very anyoing someone even said I have to slip the drivers in and make a new home made W7 disk myself to get my pc working again what the hell, where would I start.
    Maybe I should put the laptop in the post and send it back, Ive never had so much trouble before making simple memory and harddrive exchanges.
    Any advice please people Im at my wits end, my laptop is only a few month old and its now a door stopper lol

    Hi,
    Boot into the bios and be sure that the hard drive is detected. 
    Sata drivers are included in Windows 7.
    Return the bios to its default settings and use the HP Recovery Disks.  If you don't have the Recovery Disks then order them from HP. Order HP recovery Disks.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • [Solved]can't get systemd to work, syslog.service not loaded

    So, i've been trying to use systemd today, after "Create systemd configuration files." step and reboot, i always got this:
    Any Help would be appreciated..
    Last edited by veroke12 (2012-08-25 07:31:06)

    eldragon wrote:remove quiet from your kernel boot parameters. post some more useful stuff like the dmesg (obtained from the recovery console)
    that did the trick, but can't login (i use startx)..
    and get an error mounting:
    mnt-windows.mount - /mnt/windows
    Loaded: loaded (/etc/fstab)
    Active: failed (Result: exit-code) since Sat, 25 Aug 2012 13:03:57 +0700; 3min 26s ago
    Where: /mnt/windows
    What: /dev/sdb
    Process: 367 ExecMount=/bin/mount /dev/sdb /mnt/windows -t ntfs-3g -o gid=users,fmask=113,dmask=002 (code=exited, status=12)
    CGroup: name=systemd:/system/mnt-windows.mount
    Aug 25 13:03:57 myhost mount[367]: NTFS signature is missing.
    Aug 25 13:03:57 myhost mount[367]: Failed to mount '/dev/sdb': Invalid argument
    Aug 25 13:03:57 myhost mount[367]: The device '/dev/sdb' doesn't seem to ha...S.
    Aug 25 13:03:57 myhost mount[367]: Maybe the wrong device is used? Or the w... a
    Aug 25 13:03:57 myhost mount[367]: partition (e.g. /dev/sda, not /dev/sda1)...d?
    dmesg:
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e1d5602b-de83-46e0-8ed8-4366a319b49b ro init=/bin/systemd
    [ 0.709226] systemd-udevd[41]: starting version 188
    [ 2.936891] systemd[1]: systemd 188 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.170230] systemd[1]: Inserted module 'autofs4'
    [ 3.199718] systemd[1]: Set hostname to <myhost>.
    [ 4.267502] systemd[1]: [/usr/lib/systemd/system/rc-local.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
    [ 4.445331] systemd[1]: [/usr/lib/systemd/system/rc-local-shutdown.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
    [ 4.503987] systemd[1]: Cannot add dependency job for unit dkms.service, ignoring: Unit dkms.service failed to load: No such file or directory. See system logs and 'systemctl status dkms.service' for details.
    [ 4.504023] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 4.504291] systemd[1]: Socket service syslog.service not loaded, refusing.
    [ 5.060568] systemd-udevd[125]: starting version 188
    [ 5.760783] systemd-journald[132]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
    [ 5.760833] systemd-journald[132]: Reserving 33009 entries in hash table.
    [ 5.761588] systemd-journald[132]: Vacuuming...
    [ 61.730597] systemd[1]: Job systemd-tmpfiles-clean.timer/start failed with result 'dependency'.
    [ 61.730612] systemd[1]: Job dbus.socket/start failed with result 'dependency'.
    [ 61.730719] systemd[1]: Unit mnt-windows.mount entered failed state.
    [ 61.734921] systemd-journald[132]: Received SIGTERM
    [ 61.810451] systemd[1]: Startup finished in 3s 223ms 841us (kernel) + 58s 586ms 503us (userspace) = 1min 1s 810ms 344us.
    [ 61.839330] systemd-journald[379]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
    [ 61.839678] systemd-journald[379]: Vacuuming...
    [ 61.893807] systemd-journald[379]: Received SIGUSR1
    Last edited by veroke12 (2012-08-25 06:31:18)

  • Execute UCM Service in custom component

    Hi ,
    I was looking for information how to execute the UCM service in custom component and found a couple of blogs regarding the same :
    http://jonathanhult.com/blog/2012/06/execute-a-service-from-a-java-filter/
    http://jonathanhult.com/blog/2012/10/who-created-that-site-studio-section/
    http://www.redstonecontentsolutions.com/5/post/2012/05/executing-a-service-from-aservicehandler.html#sthash.X31M6ZCS.tvlE83Km.dpbs
    I am new to webcenter content and couldn't understand above blog stuff properly. Queries :
    1. We may need to call the UCM service in filter, Service or ServiceHandler. Is there any difference in code required to execute a service ?
    2. What is the correct code to execute the UCM service ?

    Ad 1) the reason why the same service might be executed slightly differently from e.g. a filter or another service/service handler is that classes Service, ServiceHandler, and the interface FilterImplementor provide slightly different attributes. Note that you may also execute a service from iDocScript (via the executeService command - see http://docs.oracle.com/cd/E23943_01/doc.1111/e10726/c08_config_ref.htm#i1078100)
    Ad 2) There is no 'correct' or 'incorrect' way/ Simply, from a filter you will do it this way, and from a service that way. I think you should ask, what is the correct way to implement my custom service - should it be a filter? Or rather a service handler? Will I need Java, or is iDocScript enough? Unfortunately, you have not shared anything about what your component should do.

  • SoundMax audio driver did not load after returning from StandBy.

    After my computer returns from StandBy, it shows me this message. "The SoundMax audio driver did not load. You may need to reinstall SoundMAX". I have downloaded and installed the latest driver that was supposed to fix this issue on Windows XP T61. Is there another solution?

    Hi,
    I wanted to confirm, that this issue occurs also to me, and started happening recently. Also the driver sometimes does not start when simply booting clean (not returning from StandBy). I'm not sure,  but I think this started happening after some driver update (I do upgrade my drivers when lenovo updates them hoping they'll fix some of the annoying glitches, but this is what I usually get...).
    My machine is: lenovo t61 7664-19G
    And I also have: windows XP
    If someone more tech-able would like to investigate this, I would be happy to supply all the details.

  • Driver won't load

    I created a new boot cd with the BroadCom 57xx driver on it but the driver
    won't load. When I type the command in to load the driver it says that the
    file doesn't exist. If I change to the path it says it is getting the file
    from and load the file from there it loads. Is there anything I can do to
    get it to load at boot from the CD without having to load in manually?

    Aaron,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Where to execute the services? i.e., SICF or SE80

    Hi friends,
    Can anybody tell me the difference between services created in SICF and the services in SE80.From where i have to execute the services?
    I have created a screen-based service in se80 and published the service.
    In SICF i have created the sub-element for the same service created in se80.I have done all the settings.and activated the service and tested that service here itself.
    But my doubt is once the service is activated in SICF , from where this service should be excuted? ie., either from SICF or from SE80?
    Am confusing at this step.please help me out.
    Thanks in advance.
    Regards
    sireesha

    Hi,
          Kindly go through this webBlog,this wil answer ur Question.
    Service Enable Your SAP Application Component
    Plz reward Points,if helpful
    Thanks and Regards
    Santos Saraf

  • How to execute IDC services from command line

    Hey Guys,
    is there some way we can execute IDC Services from command prompt.
    your any pointers will be highly appriciated.
    regards,
    sapan
    Edited by: sapan on Mar 9, 2009 7:26 AM

    Hey sapan,
    You can use IdcCommand to execute services from the command line. The process is as follows:
    1. Create a text file with the services calls you want to make, the definitions are in hda format:
    @Properties LocalData
    IdcService=UPDATE_DOCINFO
    dID=1
    dDocName=000001
    dDocType=MyType
    dSecurityGroup=Public
    dRevLabel=1
    dDocAuthor=sysadmin
    dDocTitle=My Title
    @end
    <<EOD>>
    (Note: for multiple entries in the file <<EOD>> is very important)
    2. Execute IdcCommand from the <content server install>/bin directory:
    IdcCommand -f image_update.hda -u sysadmin -l c:\idccommand.log
    Options:
    -f = file with service definitions
    -u = user to run as
    -l (lowercase L) = location for log of execution
    More detailed documentation can be found in the Idc Command Reference (idc_command_reference_10en.pdf).
    Hope that helps,
    Andy Weaver - Software Consultant
    Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw >

  • Sidetrack driver does not load

    Hi,
    I've installed the latest version of sidetrack. but when i open sidetrack a message window pops up saying:
    'The SideTrack driver is not loaded.
    Please restart your computer to load the driver.'
    I have done exactly as the readme file says.
    When i got my mac i did a custom install so i did'nt fill up my hard drive with language packs etc. i do not need. do i need to install something else that would otherwise be in osx for this to work?

    I have tried restarting several times aswell as uninstalling, reinstalling and downloading the program again.
    When i right click the sidetrack app. in the startup folder and select get info it says that the application is a unix executible file.
    I can only find one other person on the forum with this problem but it was not answered.
    Thank you

  • HT1752 IMac G5 Intel.  Disk drive will not load data, music or video disks.  What is this indication of?  Can it be fixed?

    If my disk drive is NOT loading cds, dvds, etc., what fix is suggested?

    PS - your Mac is Intel. G5 is the previous processer, it can't be both

  • USB CDC-ECM driver failed to load on 10.5 & 10.6

    Hi,
    I'm using a device with ECM.
    On 10.7 and up the AppleUSBCDCECM driver loads automatically and I have tethering.
    But on 10.5 & 10.6 the driver fails to load and the tetheing doesn't work.
    Someone have an idea?
    Thanks,
    Yaniv

    Hmmm, in 10.5.8 PPC Mac I have version 3.2.13 of /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBCDCECMData .kext
    And the same version of /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBCDCECMCont rol.kext
    Is that what you have in 10.5?
    Open console in Applications>Utilities, check the system log for the date/time of the last problem  & the Startup right after that for clues.

  • Ipod driver will not load???

    Just got a new 30gb video ipod to replace my 4gb nano that didn't work. I am having the same problem, the driver won't load. I've tried everything posted. What else can I do? Is there something wrong with my computer (HP pavilion)?
    HELP!!!

    This device is not configured correctly. (Code 1)
    okay, let's try running through Mark's driver reinstall instructions again:
    MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device"
    could you make notes on what's happening on your PC at each step of the way? let us know what happens.
    (this might help with identifying other possibilities.)
    love, b

Maybe you are looking for