Audigy2 ZS Pro Platinum - Windows sound scheme, wav fi

Installed Audigy2 ZS Pro Platinum card. Windows sound scheme no longer works nor does a timer program I use that plays WAV files to signal alarm. Control Panel "Sounds and Audio" shows individual sounds greyed out.
Windows Media Player will play the wav files thorough the player however. I see this problem without a solution in other places in the forum - maybe someone knows now??Thomas?

tbradnc,
In Control Panel, under Administrati've Tools, Services, make sure that Windows Audio is started and set to automatic.

Similar Messages

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds it will only give me the option to choose wav?

Windows 7 uses .wav (wave) files for the sound events. The default folder that Windows 7 uses to store the sound files in is located at C:\Windows\Media.
You cannot use a MP3 file but there are lots of (WAV to MP3 converters) available on internet which can help you to convert MP3 to wav serving your purpose of changing system sound.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Record audio file in a wav file format using QuickTime 7 Pro for Windows?

Is it possible to record audio file in a wav file format using QuickTime 7 Pro for Windows? The system I want to upload audio files that I record to requires they be in a wav file format / PCM - 112025kh / 8 bit mono / 11.05khz
Something tells me no...and I bought this upgrade for nothing...GRRRRRRR

QuickTime Pro for Windows allows you to make audio recordings from some input devices.
You can then "export" these new files to .wav format at any setting you choose.

No windows sound on boo

i installed my xfi platinum all fine, the sound is fantastic with music games etc. the only problem is i no longer have any windows sound when i boot up or log off. i have checked sounds and audio devices and have chosen windows default in sound scheme in the sound tab. it doesnt give me the option to hear the sound tho if i choose one in program events.
i have checked for softwaqre updates, but my software is the same as the update software

I Have been casually chasing the exact same problem myself for six months or so. All the above suggestions have been tried to no avail. P4, XP Pro sp2, Audigy Sound Blaster 2 Platinum. Altec Lansing 2. speaker system. All the .wavs play through the windows sound control panel, default sound scheme is selected and all the wavs are where they should be. Could it be that sound won't play THROUGH the Audigy card and make it to the external speakers until the Audigy drivers all load - AFTER the logon sound gets its chance to shine?Your thoughts and suggestions are all appreciated! (well... except for the "be happy it doesn't play" comments, lol.)?TonyTexas?Message Edited by tonio647 on 03-2-200703:27 PM

Punch Home Pro Platinum

I am using Punch Home Pro Platinum software. It allows the
architectural design of homes. When I click on Live view it turns
the 2-D version of my blueprint into a 3-D version. You then can
either walk around the design or click on the fly around button and
you can hover around the design in a helicopter. I want to capture
the fly around for a movie ad i am making for a client and can't
seem to figure out what settings to use. I am using the demo trial
version of Captivate if that helps.
Here's what I do:
Click on record or create a new project.
Click on software simu;ation.
Click on custom size. OK.
Choose the Punch window.
Choose full motion recording.
Click record.
I then hear a camera shutter sound and my cursor turns to an
hourglass.
An icon in the sytem tray starts flashing and then it seems
to lock up.
If I choose recording mode/s I can get it to take a "photo"
of the screeen each time I click the mouse but no movie.
HELP!!!
Ron

Hi Ron and welcome to our community
If Captivate fails to record in full motion (which can happen
because of an incompatibility between it and your other
application) you may need to use other software. Perhaps try Fraps.
(It's often used to capture video games being played).
http://www.fraps.com/
You should also report this to Adobe as a possible bug. You
may do this by
clicking
here and completing the form.
Cheers... Rick

Windows Aero Scheme in Boot Camp

How do i get Windows Aero scheme( Vista Ultimate) to function on my Macbook Pro. Is this at all possible in Bootcamp?

Hi Ronald and welcome (back) to Discussions,
normally Aero is enabled by going to Personalize (right click on desktop or control panel) > Window Colour and Appearance and selecting aero from the list.
Aero should work on your MBP, but it is neccessary that you have used the OSX Leopard DVD (the one that came with your MBP) while in Vista to install the needed BootCamp Drivers.
And if you have done that already, you should use the BC Update for Vista provided by Apple to update the drivers. http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista32.html
Hope it helps
Stefan

Migrating to Mac Pro from Windows intensive GIS modelling only in WinXP..

Hi all,
I have some cash for a new workstation and have been pondering moving to a Mac as I am frustrated with Windows for som many reasons. I am a scientist who does a lot of modelling, luckily software such as R is available on Mac so I am happy with that. However, I am stuck with some windows dependency due to ArcGIS which is windows only.
I have several questions:
1. I have a couple of existing machines that have cheapo PCI-E Sil3132 RAID cards that run RAID 0 on two 1TB disks as swap. It should be possible to use this in Bootcamp no problems as Windows has drivers for it, but could I access this array through OSX and importantly, through Parallels so I could use the Mac and Windows at the same time?
2. I have several external arrays that use the ESATA connection from some RAID cards, however, these are all in NTFS format. Can I read/write to these disks in OSX? I am confused by an abundance of posts which say yes, no but yes in Snow Leopard..
3. Reading people's comments, it is widely accepted to steer clear of the Mac RAID card as it is overpriced. Is it also not compatible with Windows?
4. Do you guys think it is worth it to move? I could just go down the PC route again and get a similar spec machine as to the Mac Pro, but I can't tell you how much Windows upsets me sometimes.
Any advice at all is appreciated.
Thanks,
A

Dual boot though makes things more complex and doesn't sound like running Windows programs in a VM is going to help.
Therefore a lot to convert, consider, and limitations.
Don't know how well if at all Parallels 6 will work with your arrays.
Swap. Put your system on an SSD, be sure to have enough RAM, because Mac OS and users avoid swapping and pageouts like the plague.
A Mac Pro can be a fine Windows only system, suitable almost, and similar to others that use Xeon processor.
Burn out hits everyone, but maybe if you could get past that and build a new system from ground up that meets your needs and expectations, that would be easier.
NTFS write ability is not hard to add, but is not native to OS X either.
Disclaimer: I run my Mac Pro as Windows 99% and have played around with some PC controller cards and Mac controller cards, and there is always trouble with cross platform.
As for Mac Pro, $4k+ for 3.33GHz 6-core 3 x 8GB RAM buys a lot of hardware, and in PC realm something that can be clocked much higher and more RAM...

Premiere Pro CS6: No sound importing .mts files

Hey,
My Setup:
- Adobe Premiere Pro CS6
- Windows 7 x64
My Problem:
I bought a DLSM (Panasonic Lumix G6H) and recorded five hours of footage using AVCHD 50p. I imported the .mts files into Premiere and got no sound at all. Whenever I open the .mts with VLC or WMP there is sound.
I spent numerous hours trying to find a solution for this problem, but unfortunately none of them worked for me.
At this point I'm quite frustrated, I NEVER create accounts to ask questions, because usually they are answered - but this time i couldnt manage to overcome this issue.
I already tried:
1) Copy the entire folder structure - didnt work
2) Rename the .mts to .m2ts - didnt work
3) Using the Media-Browser when importing the files - didnt work
4) Rename it to .avi - didnt work
5) Downloaded "Any Video Converter" as my last resort.. there is no option for 50p .m2ts (which might work) - not satisfying

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Are you allowing time for conforming?
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693

SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
Please any help because i dont know what to do any more..
My best regards

Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

Problems with Premiere Pro 2.0: sound lost after clip pasting

To integrate small projects to one bigger Project, it used to work well with Premiere Pro 1.5 in the following way: import small projects into the main sequence of the new project and, in parallel, copy the clips from the timeline of the small projects and past them into the timeline of the new project. However, I am encountering the following problems while trying to do the same thing with Premiere Pro 2.0:
·        Video and sound of every pasted clip becomes unlinked.
·        Although the sound was there (also shows in the wave view) right after the pasting and it can be rendered, but the audio Information gets lost as soon as I exit the new project (saved beforehand). If I re-open this new project, although the timeline shows all the pasted sound clips, but there is information in them - no sound (the wave views show only straight lines).
·        As well, some of the video and audio effect settings get lost (e.g. cross fading), but the effects such as brightness and contrast settings always remain.
·        At least one thing seems to be sure: the imported files themselves are ok. Newly created clips in the timeline from those imported files (dragged into the timeline) are fine - no information lost.
All tips are great helps. Thanks in advance.

I got it!
Though not described in the English HELP, but in the German HELP: I have to press the Shift and T Keys. It works in my case with the following steps:
1.     Mark the corresponding audio and video tracks
2.     Put CTI over the clip
3.     Press shift + T
4.     Double click the clip
5.     Eventually I have to repeat and press the keys shift +T again.
Thanks a lot once more for all of the hints and the detailed explanations. It is indeed a great help. I really appreciate it very much.
tryerlu

Sound Scheme "greyed out", no Internet so

I'm not 00% sure if this is related to my X-Fi, but it is definetely a wierd problem I can't find the solution for. Basically, when I go to Control Panel/Sounds and Audio Devices/Sounds, and try to play a sound from the Windows default theme, the grey box to play the sound remains grey. Additionally, none of the sound scheme sound effects ever play, either, even though I have it set to play them (no sound at startup). Even wierder is another problem with the sounds and audio devices menu: My MIDI music playback default choice (under the Audio tab) is just a blank line, and if I try to change it to "SB X-Fi Synth A [A000]" or any other device and hit apply, it just resets itself when I open the Sounds and Audio devices menu again. Which means I can't play MIDI files, which is also very frustrating. Same for Voice Playback under the Voice tab, it is stuck permanently at blank, even though my sound card is an option.
I really could care less about the sound scheme problem, but I have a nagging suspicion that it's related to a bigger problem that I have. I get no sound from Flash videos/movies on YouTube/other internet related things. In almost all my games, the sound is perfect, but on the internet nothing works.
I'm not 00% sure when the problem started, and no one I talk to has any idea whats going on. There have been a few posts on this already, but none of them found a solution to the problem besides a complete reformat, which I really don't feel like doing right now.
Some things I've tried:
Uninstalled and reinstalled the drivers (I use an mp3 player too, and I deleted all of that)
Running Dxdiag and doing all the sound tests (passed them all just fine)
Running services.msc and making sure Windows Audio is enabled.
Gone to Device Manager/Audio Codecs and made sure all codes were enabled
Made sure that there is no red x/yellow exclamation mark over my sound card in Device Manager
The only guess I have is that it is somehow related to a codec pack that I uninstalled/reinstalled, but I can't remember if that happened at the same time as the problem, since I've had this for a while but haven't tried very hard to fix it.
Thanks.

Just to finish this (lame) thread:
Took the computer to the Genius Bar. Needed a logic bar replacement. Fortunately, have Apple Care, or whatever it's called.

MacBook Pro has no sound at all. Called Apple and they said to reinstall OS X.

I have recently discovered that my MacBook Pro has no sound except for the startup chime. I called Apple and they told me to reinstall OS X because something went wrong in the OS. Is there any other way to fix this?

That's a really overly simplistic answer to your problem. Re-installing OS X doesn't always fix every problem. Yes, it might in your case, but it might not. Are you still under warranty? Either way, I'd take it into your local Apple Store and show them the problem and let them fix it. If the system has to be installed anew, so be it. But rule out other problems first.
Before you do anything, make sure that you have a back-up of your data, applications, etc. If you don't already have a back-up scheme, get an external hard drive and use Time Machine to back up your computer. Then take it into the Apple Store.
Good luck,
Clinton

My MacBook Pro has no sound every time it try to turn it up it displays a round cirlce with a line through it.

My MacBook Pro has no sound every time it try to turn it up it displays a round cirlce with a line through it.

Hi DeathDrone,
Welcome to the HP Community! I will be happy to help with your sound problems. However, I will need some additional information to better assist you. What is your operating system? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

Audigy 2 ZS - no sound, no vol ctrl, no "windows sounds" --Fixe

Ive tested the card in another system. The card worked a couple weeks ago fine, then I had to RMA my video card and so didnt use the system for awhile.. now that Ive reinstalled the video card.. no sound.
OS is XP Pro SP2.
Ive followed the "clean sweep install" procedures to the letter in the creative knowledgebase..
Ive installed the latest drivers for my card, downloaded them last night from the site..
I have no sound, though if I open the volume control through the Control Panel I can hear the level of faint background hiss go up n down if I raise and lower the volume.. In Sounds and Audio Devices, Show Volume Control in Taskbar is selected.. but theres no Volume Control in the system tray. The weird bit is, if I go to the Windows Sounds tab, the little play arrow at the bottom that would let me listen to the sample sounds is greyed out..
Device Manager tells me the Audigy WDM driver is operating ok..
suggestions please?
thanks,
nopkMessage Edited by nopk on -29-200705:00 PM
Message Edited by nopk on -29-200708:22 PM

In case someone ends up with the same problem I did.. and doesnt want to waste 5 hours hunting for the answer like I did..
This relates directly to no volume control appearing (despite turning the option on-off-on in Sounds and Audio Devices) and having --no windows noises-- ..
http://www.johntimney.com/blog/No+Sound+On+YouTube.aspx
cheers,
nopk.

Audigy2 ZS Pro Platinum - Windows sound scheme, wav fi

Similar Messages

Maybe you are looking for