Audio 12bit and preference to change from 16bit & Graphic Card issues

I taped at 12bit audio and now while capturing to FCP after every clip I capture I get "Audio sample rated does not match source tape" I looked under my choices for Sequence presets and all I find is 16 bit. How can I switch this so I am supposedly synced and avoid the warning dialog box? My present settings are DV NTSC 48 kHz. I use a sony vx2000 with mini DV tapes. Of course next time I tape I will use 16bit audio to avoid this if I can't make the change.
Also has Apple resolved the deal with FCP using more than one Graphics card or do I have to remove two of the three Graphics cards just to use FCP still? Thanks all.

12-bit is 32k. 16-bit is 48k. If you shot in 32k you have to capture in 32k. Using the 48k default preset in FCP will produce the error message you see and make your audio drift out of sync, You have to create a custom capture preset that is set to 32k audio. In A.V Settings select the DV preset and duplicate it. In the lower right change the audio sample rate to 32k. Do the same for your sequence preset. Capture your media using the 32k preset and edit in the matching sequence.
In future change all your cameras to 16-bit so you record audio at 48k. That's the standard not 32k, despite it being the default for most consumer cameras.

Similar Messages

I have a mid 2010 macbook pro 15" and recently it started crashing so I took it to my local Apple store to have it looked into and they told me its a graphics card issue requiring the replacement of the logic board at a cost to me of $340.

I took my laptop to my local Apple store to have the problem diagnosed and they told me the problem lies in the grpahics card which will require the replacement of the entire logic board at a cost to me of $340.
after that I did some research on the topic and found that this was a massive problem on this model of macbook pro and Apple never issued a recall to fix the issue, are there any class action suits in this category currently underway? if so how can I join?

I also have a mid-2010 Macbook Pro 15". Also, I had paid $100 for Apple Developer account and I can't even use Xcode or Unity3D to work on my game because the moment I write a line of code, my computer crashes. Scratch that, I used to have an Apple Developer account (I let it expire a couple of weeks ago). It hasn't been of much use since my Macbook Pro crashes 15 times a day.\
A month after buying a mid-2010 Macbook Pro 15" directly from Apple, it began to crash. At first, I assumed it was my fault as I had been messing around with Bootcamp and doing other heavy stuff, but I quickly learned it would randomly decide to shutdown regardless of the task at hand. I was very busy at the time. I was a fledgling teacher in France, and I hardly had any time, or money, to put toward a 84 euro train ticket to Paris. Also, OS X updates were around the corner (Lion, Mountain Lion), so I held out, hoping the issue would be resolved with the updates.
During my investigation of the issue, I did find the TS4088 article. It recommended I install some updates, and then it described a problem that seemed similar to my own, but the order in which the problems occured, as described in the TS4088 article, did not follow the same pattern that my computer had been experiencing–there was no gray or black screen after the restart warning message when my mac crashed. The first time I found TS4088 on Apple's Support page (at a time when their product recalls were easier to locate before they redesigned their website), it was a couple of months after I had bought the computer. I reasoned that my Macbook Pro must not be suffering from the same issues as I had never seen the video freeze or go black before seeing a restart message. The restart warning message is the last thing I saw, no loss of video or black(or gray) screen afterwards. My computer would simply start to boot up again.
About two years after buying the computer, and suffering from about 3 GPU panics a day, I searched for the TS4088 article again, wondering if I had misread it, and that maybe the issues described in the article were the same issues I was experiencing. This time I could not find the TS4088 article on Apple's Website. I searched over and over again, but it was nowhere to be found. I assumed that issue had been resolved and the article removed. Now after three years of using a faulty, unreliable computer, I was feeling like a schmuck. I searched again on Apple's website to find the TS4088 article, or any new ones that outlined my very apparent GPU issues, but I had no luck. I circled Apple's website over and over and could not find that article. It was only through a link other frustrated mid-2010 Macbook Pro owners had posted on some other website that I found the link to TS4088, also learning that the forum's users were experiencing my same problems.
Based on the language Apple used to describe the problem, I did not reason that I was suffering the same issue. Here's what happens when my computer crashes:
     • The computer seems to shut down. The display turns off, the fans stop spinning
     • The message "Your computer was restarted because of a problem . . . Press any key to restart" is displayed.
     • I press any key, the computer restarts, I wait for next crash to interrupt my work
Excerpt from TS4088
"Symptoms
Apple has determined that a small number of MacBook Pro (15-inch, Mid 2010) computers may intermittently freeze or stop displaying video on the built-in display or on an external display connected to the MacBook Pro. In this situation, you may also see a restart warning message before the video is lost or the display turns black or gray."
My computer never displays a restart message before the video is lost or display turns black. My Macbook Pro mid 2010 loses the picture on the display, and less than a second after that is the restart warning displayed. The video would never freeze or stop playing, rather the whole computer just dumped all of its processes and displayed a warning message asking me to press any key to restart.
My issues with this problem are the following:
•The problems described in TS4088 do not accurately reflect what users are experiencing. TS4088 is misleading in this respect.
•The article TS4088 was not easy to find on Apple's website. It seemed to have moved to an obscure, impossible-to-find location that could only be found thanks to the great number of other Mac users who are experiencing the same problem.
This issue hasn't been managed dutifully. I'm annoyed to have sunk money into a developer account. I'm annoyed that I sunk money into an expensive product that does not work. I'm annoyed that the description of the issue afflicting mid 2010 Macbook Pros was inaccurately and misleadingly described and that links to the TS4088 article disappeared from Apple's website when I could have truly benefitted from them. I am especially annoyed that my life in graphic design, web development, and iOS development has stagnated for several months as my computer crashes some 15 times a day. I am, however, pleased with the speed at which a Mac can boot up.

[svn:fx-trunk] 11885: Integrating Sujata and Min' s changes from the latest approved FXGUtils from CT changelist 633842.

Revision: 11885
Revision: 11885
Author:   [email protected]
Date:     2009-11-16 20:19:46 -0800 (Mon, 16 Nov 2009)
Log Message:
Integrating Sujata and Min's changes from the latest approved FXGUtils from CT changelist 633842.
CT Bugs Fixed:
- bug #2480280 (FXGUtils: pixelHinting setting to true for SolidColorStroke doesn't work.)
- bug #2479187(FXGUtils is drawing compiled FXG items is off by half a pixel)
- Fixed other instances of rounding errors from casting to int.
- Bug 2480289: Compiling richtext content markup in MXML with FlexSDK runtime option is throwing errors.
- LinkFormats cannot be child of tag has children, you do not get a compile error.
- Bug 2477649: FXGUtils needs to support setting justificationStyle to prioritizeLeastAdjustment for RichText.
- Bug 2477661: Incomplete error message when an invalid textAlign attribute value is provided.
- Bug 2444256: FXG compiler fails on percentage lineheight inside formatted text content.
QE notes: Please investigate 2 mustella failures for FXG stroke tests.
Doc notes: N/A
Bugs: N/A
Reviewer: Sujata, Min
Tests run: checkintests, mustella fxg
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGConstants.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/swf/FXG2SWFTranscoder.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/EllipseNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RectNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich BlockTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextHelper.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextProperty Node.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/types/LeadingModel.ja va
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ImageHelper.java

Windows 8.1 HP AMD laptop gets very hot and brightness wont change from max

Hi i recently bought a laptop off my friend because my computer was very hard to read and i needed something smaller, it is only a year old and has a AMD A10 processor. Yesterday we recently tried to factory reset it and reinstall back to windows 8.1 to wipe data, we had a bit of a problem and it took a few hours due to the blue screen problem but i finally got it to boot, after installing windows i have noticed there was barely any programs on the computer except for internet explorer, i also noticed the brightness was on maximum and would not change from there i press the buttons adn the slider will go down but it wont actually change, this makes it very uncomfortable for eyes to read at night or in a dark room. i am also noticing that on the left hand side near the fan the laptop gets very very hot much hotter than my old intel i5 hp laptop, could you please help with these issues ASAP as it is driving me crazy and he wont even take the laptop back until i can fix the overheating and brightness issues. thanks very much

i believe the model number is 15-n268sa

HT3702 I pay four a sing that il cost 0,99€ and apple it take from my credid card 1,98€. Its corect?

I pay four a sing that il cost 0,99€ and apple it take from my credit card 1,98€. Its corect?

If you added or changed your card details on your account then you have received a temporary store holding charge( €1.98), as described on the HT3702 page that you posted from.

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

I am pretty sure it will always use the credit card unless payment method is set to none.
That has been my experience anyway.
They already have the money from the gift card so would rather collect from your credit card.

Yesterday I purchased credit from App Store in "maaii app" 4.99$, that credit is not come in maaii credit balance and deducted the amount from my credit card. What happened that amount?

Yesterday I purchased credit from App Store in "maaii app" 4.99$, that credit is not come in maaii credit balance and deducted the amount from my credit card, Where is that balance?

Hello there, jobymk.
The following Knowledge Base article shows how to report an issue with your App Store purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

My Realtek HD Audio driver disappears (from both the Vista "Sound Manager" and the "Device Manager") and is replaced by an ATI HD Audio driver after installing an ATI Radeon 5450 graphics card. I've tried un-installing the ATI Audio driver and re-installing the Realtek Audio driver. But, upon rebooting, Vista automatically re-installs the ATI Audio driver (and the Realtek Audio driver, which I just re-installed, is no where to be found after rebooting). I'm using an HP a6110n desktop running Windows Vista.
This question was solved.
View Solution.

Hi:
I bet you were unpleasantly surprised by that!
The fix is simple:
Go into your system setup (BIOS) using the F10 key.
Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
Paul

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

I've just acquired a 2007 Mac Pro 2,1 2x 3GHz Xeon and would like to upgrade the graphics card

I've just acquired a 2007 Mac Pro 2,1 2x 3GHz Xeon and would like to upgrade the graphics card. I'd like to be able to run the Adobe CC 2014 software for 2D animation work. Don't need CUDA for any ray-traced work, just want to be able to run Ai and AE at the same time and have it handle the playback. Will this card http://www.ebay.com/itm/181466634525?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack =true be a good way to go? Or should I stick with the 4500? Or is there any other suggestion or things I should know?
<Re-Titled By Host>

Only a tad pricey but half what it use to be and works - Apple ATI 5870
http://www.amazon.com/Apple-ATI-5870-Standalone-MC743ZM/dp/B003Z6QH6W/
Check it on www.barefeats.com - back in 2010/2011 for tests
Or 5770
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/ref=sr_1_1?ie= UTF8&qid=1416257115&sr=8-1&keywords=apple+ati+5770&pebp=1416257120057

I'm buying a new machine and I have 2 options of Graphics cards

I'm buying a new machine and I have 2 options of Graphics cards 1 = NVidia NVS 510 2Gb PCi GFX with HDMi and 2 = NVidia Quadro 2000 1Gb PCI GFX Card – 3D. I know that the Quadro 2000 is supported but the NVS 510 is very new and I don't know if it has been tested on the After Effects platform yet. Which card would be the better one to choose?

Only one of those, the Quadro 2000, is listed on the system requirements page as a card that After Effects will use for the GPU acceleration on the ray-traced 3D renderer:
http://www.adobe.com/products/aftereffects/tech-specs.edu.html
See this page for details of how After Effects uses the GPU:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

Non NVidia graphics card issues with Adobe and Mountain Lion

It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
Here is what happens
As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
I tested this on the following Macs
MacBook Pro (Early 2009) with NVidia 9600M GT - it works
MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
The same Mac Pro (Early 2009) with NVidia GT120 - it works
MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
iMac (Late 2012) with NVidia 680MX - it works
Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
Already got in touch with Adobe
With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
A typical response. IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change. I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time. WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro. Eventually…
Frankly, good luck getting either side to do anything about this. Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party. Or perhaps one of the Apple mailing lists will prove useful.

How can i change my macbook graphic card?

my mac book pro with sn:w8827949yjx, was bought and registed at 2008/7/30, recently it can not start up, checked wigh genius bar was told the grapic card was failed has to be change the whole main board. I was also informed the graphic card was problem since apple factory installed into it and was infromed by apple web page. it can be changed within 4 years after registed but mine was 22 days over time.
i think it was totally unfair since i was never been informed by this but i was informed for apple new product information from my mail box but this information.
hopefully some one from apple who can read this can help me solve this matter.
tony yang

No one from Apple here - just us users. I'd plead my case to an Apple manager since you're only 22 days past the 'due date' of getting the free logic board replacement. They may make an exception. If not, ask for the Flat Rate Repair pricing, at least.
Clinton

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Audio 12bit and preference to change from 16bit & Graphic Card issues

Similar Messages

Maybe you are looking for