Audio Adapter problem

I just bought a 2.5mm to 3.5mm audio adapter for use with my BB 8830 and it doesn't work. When I plug my regular headphones into the adapter and the adapter into the phone, the sound still comes through the phone speaker. Nothing comes through the headphones.
Does anyone know if BB has a proprietary adapter that you have to use or did I just get the wrong adapter? Thanks for your help.

Hi,
AFAIK the 8800 series uses a proprietary headpeice.
You cant plug in a standard headset 2.5/3.5 mm jack.
Sorry.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Similar Messages

Problem with Nokia 5700's audio adapter

I have recently updated my Nokia 5700's firmware with the newest version. But now I can't use my audio adapter(this thing: http://img114.imageshack.us/img114/7485/adapteryb4.jpg ) which is connected with the headphones. While I listened to music, I tried to press any of the music control buttons but they didn't work. I am sure it is not broken and the problem is from the firmware, because the adapter was perfectly working before the update. Does anyone have a solution?
Thanks!

it's not bacause of the update you did. it's the damned thing itself. Main died several mounts ago. There's a problem with the battery inside the remote control. NOKIA you give all customers new ones through care centers.

Simultaneous sound: how to get sound from internal speakers and usb audio adapter

I have an iMac in my living room. It is hardwired to my home theater system in my family room. Currently, I can listen to audio in one location or the other... but not both. I bought a StarTech.com ICUSB Audio Adapter hoping that it would be a fix... not so much. Downloaded SoundSource... not so much
How can I get audio to play via my internal speakers and through my home theater system? Hosting a party this Saturday and would like multiple rooms filled with sound.

First pluging is headphones and then unplugging it. If yu can't get it fully inseted tham may indicate that end of a plug is broken off inside the jack.
Then if not above problem, try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem then an appointment at the Genius Bar of an Apple store is in order.

Audio sync problem downloading VHS-C

I've downloaded a straight VHS tape (with no audio sync problems) into final cut pro once I had changed the Camera setting to 32Khz and the capture and sequeence presets to 32khz as well (it was all aout of sync when the settings were 48Khz).
The problem now, which is driving me MAD, is I have 13 hours of VHS-C tapes, which I have put into a VHS cassette converter to download and the audio is out of sync. The capture presets are the same as above (i.e. 32KHZ) . Why is this? I downloaded them initially at 48Khz (settings on the camera 48Khz and FCP at 48Khz in capture and sequence settings), but this was also out of sync.
Why is it different from one VHS tape to a VHS-C tape?
I hope there is a God out there that can help with this one?
Thanks!

Eagleray:
I capture through a ADVC-100.
I use to find the same problem playing VHS tapes with a standard VHS player from time to time and never solved it. The out of sync audio appears when capturing some specific tapes from specific sources:
- All my home tapes recorded in my old VHS recorder shows a audio problem; not specifically out of sync, but some audio "cracks" from time to time, like an electronic noise. No way to find a capture setings that works.
- Some customers VHS tapes that showed the out of sync (no noises) and again, no combination of digitalizer settings made it works. Had to resync the audio editing and stretching in an external audio editor or cutting shorts parts and syncing them with video. The our of sync appears in small captured portions, like 10 min or so.
- Never found a sync or audio problem capturing from VHC-C (the small VHS tapes) playing them with the tape adapter in the player.
I google long hours about this problems and all that I learned is that some old VHS recorders had not a "synchro" signal in the tape.
As I told you, I don't use any pro VHS deck, just my consumer "state of the art" VHS home recorder.
I hope there is a God out there that can help with this one?
I don't think HE visit these forums.

Mini display to hdmi adapter problem

Hi,
When I connected my mini display to hdmi adapter to hdmi, and hdmi cable to my ASUS PA238QR monitor, my early 2011 MBP 13" detects the monitor, but the monitor shows "hdmi no signal".
I tried unplugging everything, including the adapter and hdmi, but to no avail. I tried putting my computer to sleep, and waking it up, still, nothing seemed to be the cause of the problem.
I read through some old discussion on this issue, and nobody seems to have a solid solution besides purchasing another adapter.
I tried booting into win7 and still, the monitor shows "hdmi no signal".
I am 100% sure my monitor and hdmi works becuase when I used other laptops it's fine.
Thus, I'm suspecting it's the mini display to hdmi adapter's problem.
Is there a way I can make sure that my macbook pro is outputting the signal?
Any recommendation or advises are welcomed. Thanks for reading.

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Itunes wont launch due to audio configuration problem

Itunes won't launch saying there is a audio configuation problem, this started all the sudden no new software added no updates, no configuration changes. I've tried uninstalling and reinstalling without improvement and all other audio programs work fine. any ideas?

This is usually a Quicktime problem, see this article:
http://docs.info.apple.com/article.html?artnum=304424

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

HT4241 HDMI adapter problem

i have an HDMI cable connected to my late 2011 macbook pro using a Rocketfish RF-AP305 mini display port adapter i plugged it all in to my 47 inch LG lcd tv but its not working i have searched all over the web but ihavnt found anything that helps so please help me

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Audio Adapter problem

Similar Messages

Maybe you are looking for