Audio alert for email when non set

I have noticed that since the update to iOS 5.0.1, some incomng emails trigger an audio alert when they are received, but I don't have audio alerts set for email.
The alert tone is tri-tone, which I don't even have set for any type of alert..! It's becoming frustrating as I can't work out how or where the alert is being set..
I originally thought that it may be emails sent from Apple (support, store, etc) but that appears not to be the case as random other senders, also trigger the audio alert, so there is no obvious pattern.
Is anyone else experiencing this type of issue?

Think I've found the problem, I've recently installed the Gmail app and added it to Notification Centre. It was set to provide an audio alert only. Turning this option off seems to have resolved this.
Strange that you can't define the alert tone for Notification Centre apps, otherwise I may have found this sooner

Similar Messages

When will the bluetooth support audio alerts for email and text messages?

When will the bluetooth support audio alerts for email and text messages? It works when I get a phone call, but I'd like it to work when getting a text message (I do this a lot in noisier areas and would rather not have to look at the phone every few minutes)
Or is there a configuration option I'm missing?

Answered in this thread:
http://forums.adobe.com/thread/1393642?tstart=0

Asking for passcode when none set up

I never set up a passcode for my iPad. It is asking me for one. I am also not connected to the internet. Help!

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How do I set an Audio Alert for Low Battery?

Is there a way to set an audio alert for a very low battery?

there might be an app for that, but there is no built in feature already on the mac like that.

Tryng to set up Aple ID on wifes iph 6, she's forgotten her password. At iforgot I type in her gmail ID and ask for email but none comes ?

trying to set up Apple ID on wife's new iphone 6, she's forgotten her password. At "iforgot.apple.com" I type in her gmail ID and ask for email but none comes ?

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Alerts to email when Bex Broadcaster Failed

Hi Experts,
Currently we are broadcasting Business KPI reports to the users from SAP BI at a scheduled time.
These broadcast settings are based on webtemplate. Some times the broadcast setting which is scheduled will fail due to the most frequest errors like " Error while generating HTML" etc.
The issue is only temporary basis, next time the same error will not come and the issue is not reproducable.So is there a way we can configure the alerts to emails when the bex broadcast setting is failed.
Transaction to see logs of broadcast settings is RSRD_LOG.
Thanks & best regards,
Sudhakar.k

3 possible solutions that come to mind:
1. Write custom ABAP program that checks RSR_PREC_SETT table and sends email when report failed entry is made, and schedule program to run periodically
2. Create process chain that kick off Broadcaster report and would also notify if report has failed.
3. You can also schedule RSR_PREC_SETTINGS_RESTART with Current date variant to run periodically and this job will restart any failed broadcaster reports from that day (stored in table RSR_PREC_SETT)
Check out this article for additional information:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30e3d697-4ca0-2c10-4b81-c474b1490064?quicklink=index&overridelayout=true
Hope it helps. Thank you.

Iphone will not show new message alert for email sent to subfolders

I have successfully synced my iphone with the exchange server so I am getting push email from entourage to my phone. However I have subfolders set up in entourage so that my email is organised. These subfolders are showing on my iphone. Although email sent to subfolders is pushed to the iphone (to the relevant subfolders), when the phone is on the home screen it does not show a new mail alert for those emails. It only shows a new mail alert for emails going to the main inbox. Obviously I need it to alert me if email is coming in to subfolders. Can anyone help with setting this up?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Pop up alerts for emails

Hi, In addition to the sound and badge alerts for emails, can I have an email popup alert, like the one for SMS messages? Thanks.

If you would like to make a suggestion for a feature you may provide feedback to Apple regarding this. Go to http://www.apple.com/feedback/iphone.html

Setting Alerts for emails

I'm trying to set an alert for a SharePoint list. I can set the alert for myself and other users (which worked fine) but I cannot set an alert to a helpdesk email. I think it has something do to with licensing. Does the helpdesk need an exchange
email to get alerts? - we're in the process of migrating everybody to 365 as we speak.
Thanks!

Hi,
Thanks for posting this issue,
Kindly find the below mentioned steps to solve this
1. Go to Exchange Management Console -> Recipient Configuration -> Distribution group.
2. Right-click on the problem group and choose properties.
3. On the Mail Flow Settings tab, double click on Message Delivery Restrictions.
4. Uncheck the check box “Require that all senders are authenticated”.
Also, check out the additional details in below mentioned URLs
http://joyknows.wordpress.com/2011/01/12/sharepoint-alerts-not-working-for-group-recipients/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

E71: audio notifications for email using Mail for ...

I can't get audio (or, for that matter vibrate) notifications for incoming email messages in my Mail for Exchange (MFE) account.
My phone is a Nokia E71-2 and I recently upgraded to firmware version 200.21.118 to see if that would cure the problem, but it did not. I've checked the Profile settings and made sure that email notifications are turned on, but audio notifications still dont work. For a while, I used Yahoo mail and the notifications seemed to work just fine for my Yahoo account. Unfortunately, I'm much more interested in using my MFE email account. I thought that perhaps the settings only applied to my Yahoo account so I have deleted it from the phone. The only active email account on my phone today is the MFE account - but still no audio notifications.
Any advice would be sincerely appreciated.
Solved!
Go to Solution.

I am not sure if this will work for you guys since I am in the US, but I think I figured out the issue. You need to change the settings for the home screen to alert you when messages arrive in the Mail for Exchange section.
To do this:
Menu > Settings > General > Personalization > Home Screen > (Make sure Home Screen is ACTIVE) Mode Settings > Home Screen Applications > E-mail 1 Notification > Select Mail for Exchange
That should work.

HT4191 I have Notes that transferred to email when I set up a new email acct. They no longer appear in Notes. I can only access them in the email acct. How do I get them out of the email acct and back to the Notes app?

I have Notes that transferred to an Email acct when I set up the acct. The Notes no longer appear in the Notes app only in the Email acct. How do I get them out of the Email acct and back to Notes? I stopped at an Apple store and they told me to copy them from the email back to Notes. But when I was in the email acct, I could not find a way to copy them. Shouldn't Notes remain in Notes unless I specifically send them somewhere else?

Go into Settings > Mail, Contacts, Calendars, select that email account on the right-hand side of the screen and turn Notes 'on' for it - they should then appear in the Notes app instead of as an email folder in the Mail app (they will still be linked to that email account, so you may need to tap the 'Accounts' button at at the top left of the list of notes)

Help,Again!!! I didn't receive a email when I set up imessage!

How come when I set up imessage, I don't get a email back and back in settings, it says Error next to my email address? Also, don't say that I need to wait, because I have been waiting for a day and counting!

Hardijs wrote:
Are you sure? The wording I got fro them is exactly as you say though the mismatch may be ... because IRS database that is used to
me bad - pushed post button without reading - the text somehow got garbled.
this should read as
Are you sure? The wording I got from them is exactly as you say though the mismatch may be ... because IRS database that is used to verify is not yet up to date with the latest information - meaning - like the onformation you gave some weeks ago to IRS.
appologies.

My iPhone no longer gives me audible alerts for email and text messages. Just stopped. Help.

My iPhone just stopped giving me audible notifications for email and text messages. It still rings for calls. I have checked the settings for "Sounds" and they have not changed. However, in these settings when I try to change the sound I get only the vibration and not the sample sound. Can anyone help?

Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden

Access denied for folder when permissions set with WMI

Hi,
When I add/modify access rights based on the Win32_ACE class, there seems to be a difference in the result, then when setting it with the GUI in Windows.
The situation is as follow:
I want to set Modify access on a remote folder, but also want to avoid deletion of the folder itself. This can easily be done by setting "deny delete on this folder only" in addition to "allow modify to this folder, files and subfolders".
So far no issue.
Now I notice that, although the GUI shows exactly the same result in advanced settings of the security property, the folder set with WMI script gives a deny when opening it with the user account. The same folder, set with the same security and result in
the advanced tab, but set in the GUI, works fine.
Note: The reason that I use WMI is because the remote system is a standalone machine, not sharing the same domain or trust.
I compared the ACEFlags, AceType and AccessMask for both the GUI set and script set permissions, and they are exactly the same.
GUI => AccessMask:1179817 AceType:0 iAceFlags:3
Script => AccessMask:1179817 AceType:0 iAceFlags:3
What a strange world we live in... :-)
Any idea?

What Operating System Interface are you referring? What program?
You are being obtuse. What is it that you are trying to compare. THe settings in WMI cannot be directly compared to anything in the Security Wizard.
¯\_(ツ)_/¯
Just the properties of the folder in Windows on the security tab. The result is the same for both the permissions set with the interface as well as the one set with the WMI script. The two references you see are just taken with WMI:
Set by Windows interface => AccessMask:1179817 AceType:0 iAceFlags:3
Set by WMI script => AccessMask:1179817 AceType:0 iAceFlags:3
This are the values "AceFlags", "AceType" and "AccessMask" from management class WIN32_ACE:
http://msdn.microsoft.com/en-us/library/aa394063(v=vs.85).aspx
I just want to show that the actual ACE object returns the same values for both methods, but the effect appear to be that the script set permission are denied. And I am looking for the reason why.
Can you provide the script that you're using to create the ACE(s) and add them? If I'm understanding what you're trying to do, there should be two ACEs created: one to allow the modify access and one to deny the folder deletion. The ACE you're showing is just
an allow ACE (AceType 0).
That is correct there are (or should be) two ACEs. I cannot get hold on my source right now (will be later today), but my code is based on this source:
http://www.minasi.com/forum/topic.asp?TOPIC_ID=7501
What I basically do is getting the DACL properties, loop through it to check that the user exists that I want to update. If it does I check that the current AceType is of the same type (allow or deny) that I am updating/adding. If that type is a match, I
replace the ACE object with the new Flag, Type and Mask using a Win32_ACE object. If type type doesn't match, then I add both the current ACE with the new ACE at the same time. I noticed that if I don't do it at the same time, only the last remains. If the
user doesn't match I check that the AceFlags is not equal to 16 (inherit) and then add the original ACE object in the ACE array. At the end I add the new ACE if the user was not found at all (new). The array of individual ACE objects is added to List of managementobjects
and then again linked to the DACL value.

Audio alert for email when non set

Similar Messages

Maybe you are looking for