Audio and (sometimes) video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 laptop after Windows 10 FREE Upgrade?? I'm sure others are have the same Audio/video problems: -  very slow, Repeating audio and video on YouTube and Netflix playback....totally unwatchable-  speakers work fine- everything was working great on Windows 8.1 there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until the real problem is fixed? Regards  -  VK      

 I have downloaded and installed the HP recommended IDT  Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is:    STWRT64.sys   6.10.6498.0  The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos.   My Split 13 X2 product id is:    E2S66AV                                      BIOS F.27

Similar Messages

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

    Any solution to the Audio and Video issues on Split X2 13" laptop after  Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory  I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio.  The video is clear but also being played in repeated frames as it moves slowly forward!-  sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided??  Regards  -  VK      

     I have downloaded and installed the HP recommended IDT  Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is:    STWRT64.sys   6.10.6498.0  The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos.   My Split 13 X2 product id is:    E2S66AV                                      BIOS F.27

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Streaming audio and/or video crashes your router BEFW11s4 firmware problem

    Ok!!! Apparently some of us have had the problem where trying to stream audio and/or video can cause the Linsys BEFW11S4 to crash, where only a power down and re-up will retore communication. Changing the MTU size has been suggested ad-nausium. I hope this works for you all, because it worked for me.
    Apparently the latest firmware is the problem. I just installed an older firmware version and problem solved (1.50.14).
    ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin
    So, looks like maybe Linksys could hopefully issue another firmware update that fixes this (we hate having to use old firmware... trading off one bug fix for other multiple bugs that may rear their ugly head later on).
    list of bugfix history found here:
    http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3Dbefw11s4_v4_v1.52.02_ver.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1130824460891&ssbinary=true

    Hi all -
    This looks like this will fix the issue I have with my router. I'm willing to try it, anyway.
    My question is pretty basic: What do I do after I download the file?
    Thanks, Kate

  • I am using MTS files.  They load in PE fine. The problem is when I try to play them, I just get audio and no video.  I have installed the latest updates.  Is there a CODEX that I need.

    I have windows 8.1.  I have downloaded the mts files from my video camera onto my hard drive.  I have loaded a subset of these mts files into premier elements and they show up fine.  I can bring them to the time line without a problem.  The issue is that when I click on them, I only get the audio and no video.  Normally when you click a thumbnail, the picture shows in the large screen.  That screen remains blank.

    John - thanks for your response
    1. Graphics Adapter:  Nvidia GeForce GTX 650
    2. My driver before you response was 3/4/14   9.18.13.3523.  I went to Nvidia and downloaded and installed latest driver 7/2/14  9.18.13.4052
    3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
    4. Some things I have done to try to resolve the problem.
         a. Searched this forum for a similar problem.  I didn't see one.
         b. Did a web search to see if I could find a solution outside this forum
         c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
         d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
    5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me.  I said yes and here I am.   I seem so close to making it work.   Thanks

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects - 6/23/14

    Very disappointed with this choice. I will definitely be seeking to uninstall this version and go back a version or two. Two many extra steps to export an mp4 now. And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware? You guys fighting mp4 as a standard, forcing us to an additional product, or what? I'll be sharing my extreme disappoint with this 'upgrade' with the rest of the developers at work and who just had it installed. I'm not seeing this being too popular opn social media either. Seems like you only did what was best for you.Thanks for showing us who's boss.

    Frank VA wrote:
    And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware?
    Not necessarily. You can render an intermediate codec with AE's render queue (thus using all of AE's power to render) and then drop that file into the Adobe Media Encoder.
    This was the workflow I've always used - even when AE could encode with MP4. Why? Well, because AE sucked at MP4 encoding. You couldn't even do multipass endoding with it!
    This is a useful workflow in a few ways:
    1. You have an archive-quality file to come back to in the future.
    2. You can use AE's full power to render.
    3. You can use AME's superior encoding capabilities.
    4. You can tweak your compression settings and try various encoding parameters to improve the quality while decreasing the bitrate of your product WITHOUT having to re-render the AE comp every time you try since you're working off of the intermediate file. I mean, imagine a comp with several 3d layers, depth of field, shadows from multiple lights, and 250,000 particles from Particular. What if you made an MP4 and then the client needed a smaller file size or the MP4 you made was too heavily compressed and you needed higher quality? I don't know about you, but I'd much rather only render that 18-hour monster once.
    This workflow actually saves time for many people.
    And, in any workflow, this produces a better product.
    Again, this is what I did even when AE could encode MP4's.
    Frank VA wrote:
    You guys fighting mp4 as a standard, forcing us to an additional product, or what?
    They aren't fighting MP4 as a standard, in fact, when Adobe folks pop in here and answer questions, that's often their recommendation for delivery codec.
    Frank VA wrote:
    Seems like you only did what was best for you. Thanks for showing us who's boss.
    Listen, I understand your frustration. Knocking out a quick compressed file from AE for client review is handy.
    However, maintaining the h.264 encoding in AE took up development time. There are only so many person-hours per week for the (relatively tiny) AE team to spend on building each version of AE.
    I never liked AE's h.264 encoding - AME has always done a superior job. Since we have AME to do our encoding, I would rather the AE team focus their effort on improving AE as a compositing and motion graphics tool rather than as an encoding tool.
    Again, I get the frustration. I can see where it feels like they are doing what's good for them and not us, but I think, in the long run, this way is better for us. Right now, the majority of the AE team is working on making AE faster to work with and faster to render. The sooner we get a relatively bug-free version of that, the better! (Especially for folks on Mac OSX Yosemite who can't RAM preview smoothly in any version of AE).
    And at least the After Effects team has been very transparent about things - for example, this blog post talks about their reasoning: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Merging one Audio and one Video into one file.

    Hi guys,
    I have one audio and one video file, related to same issue.
    I want to merge it using Java.
    Please help me to solve this out.
    Thanking you all in advance.
    Regards,
    Lovelesh.

    check out FMJ:
    http://fmj-sf.net/

  • HT201412 All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds

    All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds. Could this be a software glitch or a hardware problem, how can I find out and fix it

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

  • Downloaded a movie (mpeg-4) from youtube and I only have audio and no video.  it plays on another pc but not this one.  please help.

    Hi,
    I downloaded the latest free version of quicktime.  I am trying to play a movie (mpeg-4) that was downloaded from youtube.  It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.  Can anyone offer some suggestions please?  I need to play it on thislaptop computer as I require it for a school presentation.  Thank you.

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Changed TV out to off but ipod still only plays audio and no video

    Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
    Compaq Presario 1500   Windows XP   2 ghz 256 mb ram laptop

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Maybe you are looking for