Audio and video drivers for IBM Lenovo think center Pc

Hi
This is shiva and i require audio and video drivers for the following pcLenovo ThinkCenter M/T -9389-A76 S/N- ****** where to get it please mail me or leave a scrap here , regarding the link. *@*
Moderator edit: Removed serail number to prevent mis-use. Masked member's email address to prevent it from being scooped up by the spam crawlers. Please use the private Message (PM) feature instead. Click on the member's name>Send this user a private message.

Hi Shiva,
You can find drivers here:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66440
If you have XP then you might require following for audio as well:-
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65440 [SP1]
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65456 [SP2]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

HP 15-R074TU Audio and Video drivers

Hello,
Recently 2 weeks back I have bought HP 15-R074TU laptop free dos. I have installed windows7 64 bit. And other required softwares, I have problems with audio which is very low. Video display is not proper, movies are not comfortable to watch without any reason get stucks. I have installed HP recommended video and audio driver but still having problems.
Requesting you to recommend the audio and video drivers for HP 15-R074TU model, which will be very helpful for me
This question was solved.
View Solution.

Hi:
See if the graphics driver directly from Intel works for you...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24245
Try the audio driver directly from Realtek. Accept the agreement. DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

Audio and video drivers defect?

Hello there,
since yesterday i have a big problem with my iMac. It can't play any Audio and Video anymore. Video editing like Final Cut Pro 7, Premiere Pro and After Effects are crashing, when youre trying to start them. Same thing with iTunes and Diablo 3. Photoshop seems to work fine. Browsing in the internet is fine but also no video and audio here. And my system seems to be way slower than before.
What did happen? Well i was working in after effects and hearing some music via iTunes and had some preview running in the finder (cover flow i think is the name of feature), Then the sound stopped but i didnt bother to much about it. But then cover flow also stopped working. So i did a restart and after that the problems were there.
My Suggestion: After Effects is missing output-modules, in the audio menu in the system preferences there is no output modul avaiable either (no, even no digital) although the boot sound works perfectly. So i guess the drivers for audio and video aren't working anymore. But i have no idea how to fix this.
What i've tried: i've reseted the nvram two times, i install mac os X snow leopard again (without deleting the previour installation) and run all updates. I also reseted the System Control Manager (unplug the imac for fifteen seconds) and run the Apple Hardware Test. The latter said there is an error 4MDT/4/40000003:HDD -1299. No fking clue what this means. Google didn't help.
Can someone help me pls or do you know if the people at the genius bar can handle this kind of problem? I have an appointment at the genius bar on saturday, but i have no idea how trained these people are at fixing mac os issues.
ah and before i forget: i didnt configure the time machine :/ so there is no easy moving back to a time the imac was working.

Yeah i know its the hard disk drive. I just cant find anything what this code means besides theres something wrong with hdd
And yes i already backed it up, but anyway thanks for your advice.

Separate audio and video inputs for Quicktime Broadcast?

I want to produce some real time streaming via Quicktime Broadcast. My audio will be coming from a Mackie mixer with firewire interface, the video will be coming from my video switcher which has a firewire output. Will I be able to combine the audio and video firewire feeds in the computer (or software), or must I combine the audio and video into one firewire feed before it hits the computer?
Thanks!
Rob Cook

I just did my first feed Monday night. I used a video mixer and Mackie board myself. I feed the audio and video(component) into my DSR-20 VCR, which I also use for a tape backup recording. This then feeds the QT Broadcaster. I don't think you can feed anything but a firewire machine or iPhoto camera into Broadcaster. Might work with an USB camera/vcr???
I feed H.264 video, at 320x240 with mono 16 bit audio. Hint... don't do disolves, as they increase the frame rate. simple cuts-only seems to be the best. We also fed keynote slideshow into switcher... carefull there, as it produces saturated colors that will effect the signal... the switcher will think the super saturated video is sync and glitch the video. red is the worst, of course. Next week I am going to use a little proc amp to drop the chroma a bit.
G5 Mac OS X (10.4.8) Dual 2.5, PPC, 2.5 Gig Ram

Audio and wireless drivers for c738tu

hi. i had to recently install windows xp on my compaq pressario c738tu. now there is no audio and the control panel shows no audio device installed. also my wireless network and ethernet controller is not working. i downloaded the available drivers for xp from the hp site, but to no use. please help.
Message Edited by swastikagrawal on 05-27-2009 07:39 AM
This question was solved.
View Solution.

Hi,
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
Similarly install Modem Drivers:
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
2. Select "Install from a list or specific location"
3. Click Next. Then select "Don't search, I will choose the driver to install"
4. Click Next and then select "Modem" from the list.
5. Click Next and then click Have Disk.
6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Need audio and modem drivers for Tecra A6

Hi there,
I couldn't find the drivers (audio+modem) Tecra A6 EZ6411 for WXP SP2.

Hi
and why you dont visit the Toshiba driver page and download the right drivers???
The Toshiba driver page provides XP drivers for Tecra A6 PTA60E and for Tecra A6 PTA61E.
If you dont know what Tecra you exactly have please check the label at the bottom of the unit!!!!
I hope and think that everything is clear now.
Have a nice day ;)

Windows 7 Touch Screen and Video Drivers for HP Pavilion tx1219us

Updated to windows 7 and can't find drivers for the Video Driver and Touch Screen. Can anyone help me?

Bummer...
That is even an older GPU than the GMA 900.
It is an Intel 82852/82855 GM/GME Graphics Controller.
OK... I have a possible driver you can use for that. No guarantee it will work great but it should work...
Here is the link to my OneDrive folder.
https://onedrive.live.com/redir?resid=832F4957D2E51B93%21263
Download and unzip the file labeled Intel 82865g Driver (Vista - Win7).
You have to use the manual install method like you did with the other 2.
Good luck!

Sound and video drivers for G60-453NR laptop?

Will HP be providing updated Windows 8 drivers for G60 laptops?
Thanks,
David

Hi David,
If Windows 8 drivers are released for your notebook, they will be posted here.
HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011. Most Windows 7 drivers will work in Windows 8.
Check out this page to see if your computer has been tested by HP with Windows 8.
You can run the Upgrade assistant software, which will scan your PC and generate a report on what is currently installed on your PC is compatible with Windows 8. This upgrade guide for Windows 8 provides a lot of information that is needed for anyone considering upgrading.
I hope this helps,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Audio and video compression preferences for export to DVDSP

Hi,
I have a few questions here. The first is regarding the internal use of compressor by DVD Studio Pro. It is my understanding from (limited experience with) past projects that quicktime movie files are automatically compressed to an mpeg2 format when imported into DVDSP. To what extent do I have control over the level of compression, and are the default mpegs that were made optimal quality? Where can I check this?
My second question is regarding compression of audio files. Whereas my video files were automatically compressed, I am not so sure about the audio. I was forced to compress the audio down to Dolby2 separately using the external compressor program, in order not to exceed the bitrate on my last project. Was this just a question of one or the other (video/audio) needing further compression than the default amount, or is there more to this issue?
I live and work with video in Europe, where I have recently been told that optimal audio is mp3? 4? rather than Dolby 5.1? Is this correct, and how much more space does dolby 5.1 take than dolby2? How significant an issue is this when making dvd's for musicians?
Lastly, can someone recommend the best quality audio-video compression solution for a dvd containing approx 40 minutes of audio and video footage for use in europe?? or explain how I might go about finding this out for myself?
Thanks a lot, and I look forward to reading your comments.
4 x 2.5 GHz PowerPC G5 Mac OS X (10.4.6) 8 GB DDR2 SDRam
4 x 2.5 GHz PowerPC G5 Mac OS X (10.4.6) 8 GB DDR2 SDRam

It is my understanding from (limited experience with) past projects that quicktime movie files are automatically compressed to an mpeg2 format when imported into DVDSP. To what extent do I have control over the level of compression, and are the default mpegs that were made optimal quality? Where can I check this?
Settings for DVDSP's internal encoder can be adjusted in DVDSP preferences. Press Command-, - that's the Apply and the comma keys - to bring those up, then select the Encoder tab. In your case, make sure you adjust the settings for SD DVD (and not HD-DVD). You will also be able to specify whether to encode in the background (basically, as soon as you import your file) or encode on build, at the bottom of that tab.
I was forced to compress the audio down to Dolby2 separately using the external compressor program, in order not to exceed the bitrate on my last project. Was this just a question of one or the other (video/audio) needing further compression than the default amount, or is there more to this issue?
I can't confess to have read any of your previous threads, but if you exceeded bit rate, that is a common reason to need to use Dolby compression for your audio. (unless you can afford to recompress your video files)
That is, if you video files use a high bit rate (say over 6 Mbps average), then it's usually necessity to use Dolby compression to make sure that all your footage fits on a single disc. (this is a simplification, of course, but I think you get the idea)
Or was there more to this question that I'm missing?
I live and work with video in Europe, where I have recently been told that optimal audio is mp3? 4? rather than Dolby 5.1? Is this correct, and how much more space does dolby 5.1 take than dolby2? How significant an issue is this when making dvd's for musicians?
Someone was mistaken when they told you that DVDs accept - let alone are optimized for - mp3 or mp4 files. That's flat out wrong.
As for the difference between Dolby 5.1 vs 2.0, that depends on your encoding rates. Typically, most folks encoder Dolby 2.0 at 192 kbps, with some choosing to up the bit rate to 224 kbps. Beyond 224 kbps, you're not actually improving audio quality for a 2.0 mix, you're just bloating your file size. When it comes to 5.1 audio, it's typical to encode your audio at 384 or 448 kbps.
When it comes to compressed audio vs uncompressed audio, it does matter when you're making DVDs for musicians. But that means that you'll probably need to lower the bit rate on your video files.
Lastly, can someone recommend the best quality audio-video compression solution for a dvd containing approx 40 minutes of audio and video footage for use in europe??
If you want to keep you audio as AIFF files, set your encode to 2 Pass VBR Best, with an Average bit rate of 5.0 Mbps and a Max bit rate of 7.0 Mbps. If you need things to happen a bit faster, use One Pass (not One Pass VBR) and use 5.5 Mbps as your bit rate.
If you want to have a firm grasp over how all these numbers work, there is a section at the back of DVDSP manual, that explains how to calculate bit rates (what we call bit budgeting in the business). Give that a quick once-over if you can.

Pavilion a1020n Device Drivers - Audio and Video

Hello,
I have a Pavilion a1020n and recently loaded it with Windows XP Pro SP3. However, I can't seem to find the Audio and Video drivers. In Device manager, I'm missing 1. Audio device on high definition audio bus and 2. Video Controller (VGA compatible). I have searched everywhere and could not find the driver, even on HP's website. HP's website only has updates, but not the original drivers. Thanks for your help.

Hi:
Here is the link to the drivers for your PC:
Chipset: Install first then reboot:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18494&lang=eng
Graphics:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=12531&lang=eng
Audio: Accept the agreement, download and install the third one on the list.
http://218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownType...
Paul

How to get audio and video in one file

hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video. Delete the old, no-longer-synced audio and you should be set.

[NEW] Xanim: animations, audio and video player

Xanim is an animation, audio and video player for various formats. It's popular on Unix systems. Enjoy!
PKGBUILD:
# Contributor: Eric Belanger <[email protected]>
pkgname=xanim
pkgver=2.80.1
pkgrel=1
pkgdesc="XAnim is a program that can play animations, audio and video of various formats"
url="http://smurfland.cit.buffalo.edu/xanim/home.html"
license=""
depends=('x-server' 'glibc')
makedepends=('sed' 'x-server' 'zlib')
source=(http://smurfland.cit.buffalo.edu/xanim/files/${pkgname}2801.tar.gz)
md5sums=('e2ecd086c160f18dd7cc3cac438758c2')
build() {
cd $startdir/src/${pkgname}2801
xmkmf
sed -i 's=INCROOT = /usr/X11R6/include=INCROOT = /usr/X11R6/include/X11=' Makefile
cp docs/xanim.man .
make || return 1
make DESTDIR=$startdir/pkg install
make DESTDIR=$startdir/pkg install.man

Thanks for this. I was looking around all over the place for it, and then I come to the ol faithful archlinux forums, and someone has the pkgbuild for it.

HOW DO I FIND THE DRIVERS FOR WINDOWS 8 AUDIO AND VIDEO TO UNINSTALL?

I NEED TO INSTALL AND UNINSTALL WINDOWS 8 DRIVERS FOR AUDIO AND VIDEO SO THAT I MAY REINSTALL THEM, BUT I DON'T KNOW WHERE TO GO TO FIND THEM IN THE FIRST PLACE.
ALSO, IF I PURCHASE THE PROGRAM FOR UPDATING DRIVERS, WILL THAT PROGRAM ALSO INSTALL THE NEW AUDIO/VIDEO DRIVERS AND UNINSTALL THE FORMER ONES SO THAT I DON'T HAVE TO GO THROUGH SO MANY STEPS BY MYSELF. I FIND THE DIRECTIONS TO DO THIS FOR MYSELF VERY COMPLICATED.

Hi, I would like to assist you on this matter, however I would need some information from you first. I see that you are running windows 8. What is the make and model number of the computer that you are using? The windows 8 that you are using, is it a 32 bit or a 64 bit operating system? Please write back and I will be happy to do research on this issue.
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Syncing Audio and Video but wish for the Audio not to move on timeline?

Has anyone worked out how to sync audio and video within Premiere Pro but have the Audio stay fixed on the timeline and the video move? Every way I try it Premiere Pro insists on moving the audio. Locking the track does not work as you cannot select the audio within it to Sync with.
I have a music video shoot with 14 camera angles used on the lead singer (don't ask me why). Multi-camera editing is not an option as there are too many sources for my brand new MacbookPro to handle. I think I would need the computer from Superman II to edit that many clips together.
What I am doing is syncing the first clip, the one Im going to use as the baseline fall back shot and then I need to sync other clips onto the timeline. However Premiere Pro insists on moving the audio to fit with the video not visa-versa.
Any help would be appreciated.

@slitchfield: on the mentioned page, it is stated that "Improvements in screen real estate, with slimmer top status bar and optional (in some apps) bottom toolbar, meaning that all phones will have a larger useful display area."
But on the E6 the bottom toolbar decreases available screen size in most apps, most noticeable in Web browser where the full view has gone. The bottom toolbar is not optional, you can't configure it yourself.
And: "Homescreen widgets will now come in up to five different sizes (1x1, 2x1, 4x1, 2x2, 4x4) and allow a greater degree of interactivity.", but on the E6 they are in only one size, always with large borders and other visual effects.
So beware of differences between phones, perhaps some aspects of Belle work differently depending on the type of device.
"Notes now brings up a white (and AMOLED-unfriendly...) editing screen.": that you can change by switching themes, "Dark Solid for Anna" does a good job. It is a shame that the lines of Notes have gone though.
When switching themes, I found you have to restart the phone, otherwise the theme doesn't get properly loaded in all apps. Stopping/starting apps is not enough. So when experimenting and loading one theme after another, you may end up with disfunctional combinations of black-on-black and white-on-white, but it may not be due to the last theme. Also you may end up with a good combination that isn't around anymore the next time you restart your phone.
Current N900 and former E6 user regretting Belle upgrade
Devices owned: 2110, 2110i, Cellular Data Card, 8110, 7110, 6210, 6310i, 6100, 9500, 6233, 5140i, 3109c, N900, E6-00

Audio and video drivers for IBM Lenovo think center Pc

Similar Messages

Maybe you are looking for