Audio and video glitches

As of the last few days, any time I play songs or videos on my iPhone it hitches at a certain point and skips to the next track. Videos will stop, crash to the home screen, and start from the beginning the next time I play them. I have already restored the phone and started fresh (not from the backup). Before the restore, only songs and videos that were added within the last few days had the issue, now every single track is affected. Here is the part that confuses me, it always at the exact same moment when I play them, but if I de-select the music and make it re-sync all the files, they still have the same issue, but at a different spot in the song! All songs are ripped from cd at 128 aac encoding, all videos done with handbrake at iPhone settings (480x, H.264). No hacking at all. It is driving me completely up the wall, does anyone have any ideas or suggestions?
Message was edited by: j.brennan

Just for minor clarification, the time will continue moving after the audio stops for about 3 seconds, then it skips to the next song (audio) or crashes to the home screen (video). If I start the song or video and drag the slider past that point, it continues playing to the end without issue. As the days have gone on, it's getting worse and worse, some episodes would have multiple points that I would have to skip past. Videos change place on my iPhone far more often than songs, so that was what I noticed first. But despite several restore attempts, every track I transfer to the phone now behaves in this way. It is really frustrating, as I use this for its iPod functions more than the phone...

Similar Messages

Photo Booth Audio and Video are out of sync?

Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues...

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

Separate audio and video inputs for Quicktime Broadcast?

I want to produce some real time streaming via Quicktime Broadcast. My audio will be coming from a Mackie mixer with firewire interface, the video will be coming from my video switcher which has a firewire output. Will I be able to combine the audio and video firewire feeds in the computer (or software), or must I combine the audio and video into one firewire feed before it hits the computer?
Thanks!
Rob Cook

I just did my first feed Monday night. I used a video mixer and Mackie board myself. I feed the audio and video(component) into my DSR-20 VCR, which I also use for a tape backup recording. This then feeds the QT Broadcaster. I don't think you can feed anything but a firewire machine or iPhoto camera into Broadcaster. Might work with an USB camera/vcr???
I feed H.264 video, at 320x240 with mono 16 bit audio. Hint... don't do disolves, as they increase the frame rate. simple cuts-only seems to be the best. We also fed keynote slideshow into switcher... carefull there, as it produces saturated colors that will effect the signal... the switcher will think the super saturated video is sync and glitch the video. red is the worst, of course. Next week I am going to use a little proc amp to drop the chroma a bit.
G5 Mac OS X (10.4.8) Dual 2.5, PPC, 2.5 Gig Ram

MAC, importing GoPro 720 video at 120fps, the audio and video do not sync.

MAC, importing GoPro 720 video at 120fps, the audio and video do not sync. Even after rendering, the audio and video are off by several seconds. Any recommendations? Thank you, Troy@

John:
Thanks for your reply. Excuse my referring to you as "Kevin". I'm new to the Adobe Community. I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself. I'm going to try both solutions. Whichever works I'll be sure to reply to the thread with my findings. I found this article which provides the following solution: http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Does the mini displayport able to transfer audio and video to an external monitor (example: a tv) using a 2011 13" MacBook Pro with an hdmi cable?

I was wondering this, because I want to hook up my 2011 MacBook Pro to a external monitor (TV) using an hdmi cable. This would be heplful before I buy a mini displayport to hdmi adapter, and then maybe find out that the mini displayport might not transfer audio, only video.

Yes, min Displayport supports audio and video for the 2011 MBP 13" via HDMI.

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

How to get audio and video in one file

hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video. Delete the old, no-longer-synced audio and you should be set.

DO i need some extra hardware interface for receving both Audio and video

hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
     config= new Config();
     GridBagLayout gridBagLayout= new GridBagLayout();
     GridBagConstraints gbc;
     JPanel p= new JPanel();
     p.setLayout( gridBagLayout);
     JPanel localPanel= createLocalPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.gridwidth= 2;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
     p.add( localPanel);
     JPanel targetPanel= createTargetPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 1;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
     JPanel mediaPanel= createMediaPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 2;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
     update.setEnabled( false);
     rtcp.addActionListener( this);
     update.addActionListener( this);
     buttonPanel.add( rtcp);
     buttonPanel.add( update);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 3;
gbc.gridwidth= 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
     p.add( buttonPanel);
getContentPane().add( p);
     list.addMouseListener( this);
     addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "Media Locator:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_media_file= new JTextField( 35);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
     p.add( tf_media_file);
     tf_media_file.setText( config.media_locator);
     cb_loop= new JCheckBox( "loop");
     startXmit= new JButton( "Start Transmission");
     startXmit.setEnabled( true);
     startXmit.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 2;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
     p.add( cb_loop);
     cb_loop.setSelected( true);
     cb_loop.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
     p.add( startXmit);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
     p.setBorder( titledBorder);
     return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     targets= new Vector();
     for( int i= 0; i < config.targets.size(); i++) {
     targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
     list.addKeyListener( this);
     list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
     p.add( scrollPane);
JPanel p1= new JPanel();
     p1.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_address= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
     p1.add( tf_remote_address);
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
     p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
     p2.add( addTarget);
     p2.add( removeTarget);
     addTarget.addActionListener( this);
     removeTarget.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.gridwidth= 2;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 20,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
     p1.add( p2);
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
     p.add( p1);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
     p.setBorder( titledBorder);
     return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     JTextField tf_local_host= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
     p.add( tf_local_host);
     try {
String host= InetAddress.getLocalHost().getHostAddress();
     tf_local_host.setText( host);
     } catch( UnknownHostException e) {
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
     p.add( tf_data_port);
     tf_data_port.setText( config.local_data_port);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
     p.setBorder( titledBorder);
     return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
     if( source == addTarget) {
     String ip= tf_remote_address.getText().trim();
     String port= tf_remote_data_port.getText().trim();
     String localPort= tf_data_port.getText().trim();
     addTargetToList( localPort, ip, port);
     if( avTransmitter != null) {
     avTransmitter.addTarget( ip, port);
     } else if( source == removeTarget) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          if( avTransmitter != null) {
     avTransmitter.removeTarget( target.ip, target.port);
          targets.removeElement( target);
          listModel.setData( targets);
     } else if( source == startXmit) {
     if( startXmit.getLabel().equals( "Start Transmission")) {
     int data_port= new Integer( tf_data_port.getText()).intValue();
          avTransmitter= new AVTransmitter( this, data_port);
     avTransmitter.start( tf_media_file.getText().trim(), targets);
          avTransmitter.setLooping( cb_loop.isSelected());
     startXmit.setLabel( "Stop Transmission");
     } else if( startXmit.getLabel().equals( "Stop Transmission")) {
          avTransmitter.stop();
          avTransmitter= null;
          removeNonBaseTargets();
          listModel.setData( targets);
     startXmit.setLabel( "Start Transmission");
     } else if( source == rtcp) {
     if( rtcpViewer == null) {
     rtcpViewer= new RTCPViewer();
     } else {
          rtcpViewer.setVisible( true);
          rtcpViewer.toFront();
     } else if( source == cb_loop) {
     if( avTransmitter != null) {
          avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
     String localPort= tf_data_port.getText().trim();
     for( int i= targets.size(); i > 0;) {
     Target target= (Target) targets.elementAt( i - 1);
     if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
     i--;
public void addTargetToList( String localPort,
                         String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
                              port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
     if( rtcpViewer != null) {
     rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
     config.local_data_port= tf_data_port.getText().trim();
     config.targets= new Vector();
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( config.local_data_port)) {
          config.addTarget( target.ip, target.port);
     config.media_locator= tf_media_file.getText().trim();
     config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          tf_remote_address.setText( target.ip);
          tf_remote_data_port.setText( target.port);
     int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
     this.options= options;
public int getSize() {
     int size;
     if( options == null) {
     size= 0;
     } else {
     size= options.size();
     return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
     Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
     } else {
     name= null;
     return name;
public void setData( Vector data) {
     options= data;
     fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
               TargetListModel listModel, Vector targets) {
     this.localPort= localPort;
     this.ip= ip;
     this.port= port;
     this.listModel= listModel;
     this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
     if( !targetExists( localPort, ip, port)) {
     targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
     boolean exists= false;
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( localPort)
     && target.ip.equals( ip)
          && target.port.equals( port)) {
          exists= true;
     break;
     return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
     this.tx= tx;
     local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
     String result;
     locator= new MediaLocator( filename);
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null) {
     return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter( targets);
     if (result != null) {
     processor.close();
     processor = null;
     return result;
     // Start the transmission
     processor.start();
     return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     localPorts = new int[ pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     // for (int i = 0; i < 1; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
          port = local_data_port + 2*i;
          localPorts[ i]= port;
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addReceiveStreamListener(this);
          rtpMgrs[i].addRemoteListener(this);
     for( int k= 0; k < targets.size(); k++) {
          Target target= (Target) targets.elementAt( k);
          int targetPort= new Integer( target.port).intValue();
          addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          e.printStackTrace();
          return e.getMessage();
     return null;
public void addTarget( String ip, String port) {
     for (int i= 0; i < rtpMgrs.length; i++) {
     int targetPort= new Integer( port).intValue();
     addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     mgr.addTarget( addr);
     tx.addTargetToList( localPort + "", ip, port + "");
     } catch( Exception e) {
     e.printStackTrace();
public void removeTarget( String ip, String port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
     } catch( Exception e) {
     e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
     System.out.println( ce);
     if( ce instanceof DurationUpdateEvent) {
     Time duration= ((DurationUpdateEvent) ce).getDuration();
     System.out.println( "duration: " + duration.getSeconds());
     } else if( ce instanceof EndOfMediaEvent) {
     System.out.println( "END OF MEDIA - looping=" + looping);
     if( looping) {
     processor.setMediaTime( new Time( 0));
          processor.start();
public void setLooping( boolean flag) {
     looping= flag;
public void update( ReceiveStreamEvent event) {
     String timestamp= getTimestamp();
     StringBuffer sb= new StringBuffer();
     if( event instanceof InactiveReceiveStreamEvent) {
     sb.append( timestamp + " Inactive Receive Stream");
     } else if( event instanceof ByeEvent) {
     sb.append( timestamp + " Bye");
     } else {
     System.out.println( "ReceiveStreamEvent: "+ event);
     tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
     String timestamp= getTimestamp();
     if( event instanceof ReceiverReportEvent) {
     ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
     StringBuffer sb= new StringBuffer();
     sb.append( timestamp + " RR");
     if( rr != null) {
          Participant participant= rr.getParticipant();
          if( participant != null) {
          sb.append( " from " + participant.getCNAME());
          sb.append( " ssrc=" + rr.getSSRC());
          } else {
          sb.append( " ssrc=" + rr.getSSRC());
          tx.rtcpReport( sb.toString());
     } else {
     System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
     String timestamp;
     Calendar calendar= Calendar.getInstance();
     int hour= calendar.get( Calendar.HOUR_OF_DAY);
     String hourStr= formatTime( hour);
     int minute= calendar.get( Calendar.MINUTE);
     String minuteStr= formatTime( minute);
     int second= calendar.get( Calendar.SECOND);
     String secondStr= formatTime( second);
     timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
     return timestamp;
private String formatTime( int time) {
     String timeStr;
     if( time < 10) {
     timeStr= "0" + time;
     } else {
     timeStr= "" + time;
     return timeStr;
* Stops the transmission if already started
public void stop() {
     synchronized (this) {
     if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTargets( "Session ended.");
          rtpMgrs[ i].dispose();
public String createProcessor() {
     if (locator == null) {
     return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
     ds = javax.media.Manager.createDataSource(locator);
     } catch (Exception e) {
     return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
     processor = javax.media.Manager.createProcessor(ds);
     processor.addControllerListener( this);
     } catch (NoProcessorException npe) {
     return "Couldn't create processor";
     } catch (IOException ioe) {
     return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
     return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
     return "Couldn't find tracks in processor";
     // Set the output content descriptor to RAW_RTP
     // This will limit the supported formats reported from
     // Track.getSupportedFormats to only valid RTP formats.
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     Format supported[];
     Format chosen;
     boolean atLeastOneTrack = false;
     // Program the tracks.
     for (int i = 0; i < tracks.length; i++) {
     Format format = tracks[i].getFormat();
     if (tracks[i].isEnabled()) {
          supported = tracks[i].getSupportedFormats();
          // We've set the output content to the RAW_RTP.
          // So all the supported formats should work with RTP.
          // We'll just pick the first one.
          if (supported.length > 0) {
          if (supported[0] instanceof VideoFormat) {
               // For video formats, we should double check the
               // sizes since not all formats work in all sizes.
               chosen = checkForVideoSizes(tracks[i].getFormat(),
                                   supported[0]);
          } else
               chosen = supported[0];
          tracks[i].setFormat(chosen);
          System.err.println("Track " + i + " is set to transmit as:");
          System.err.println(" " + chosen);
          atLeastOneTrack = true;
          } else
          tracks[i].setEnabled(false);
     } else
          tracks[i].setEnabled(false);
     if (!atLeastOneTrack)
     return "Couldn't set any of the tracks to a valid RTP format";
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // audio frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
     int width, height;
     Dimension size = ((VideoFormat)original).getSize();
     Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
     Format h263Fmt = new Format(VideoFormat.H263_RTP);
     if (supported.matches(jpegFmt)) {
     // For JPEG, make sure width and height are divisible by 8.
     width = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
     height = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
     } else if (supported.matches(h263Fmt)) {
     // For H.263, we only support some specific sizes.
     if (size.width < 128) {
          width = 128;
          height = 96;
     } else if (size.width < 176) {
          width = 176;
          height = 144;
     } else {
          width = 352;
          height = 288;
     } else {
     // We don't know this particular format. We'll just
     // leave it alone then.
     return supported;
     return (new VideoFormat(null,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    null,
                    Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realiz

I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works

OT: What viewers do you need to use ALL audio and video files?

I had a lot of trouble with audio and video files on my PC. I
now have a
MacBook Pro, which is a big improvement. But I still
frequently
encounter files that I can't use. I try to open them, but
Apple doesn't
know what to do with them. For example, I often encounter
unusable
videos while perusing news websites. I also have some audio
files with
.mva or .mvw extensions that don't work.
So what viwers/players do I need to download in order to be
able to play
every audio/video file that comes my way? iTunes handles .mp3
files, and
I also have QuickTime installed. I just viewed another video
after I
installed a Flash plugin. What else do I need to install?
Thanks.
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

VLC is a big favorite
http://www.macupdate.com/app/mac/5758/vlc-media-player

HOW DO I FIND THE DRIVERS FOR WINDOWS 8 AUDIO AND VIDEO TO UNINSTALL?

I NEED TO INSTALL AND UNINSTALL WINDOWS 8 DRIVERS FOR AUDIO AND VIDEO SO THAT I MAY REINSTALL THEM, BUT I DON'T KNOW WHERE TO GO TO FIND THEM IN THE FIRST PLACE.
ALSO, IF I PURCHASE THE PROGRAM FOR UPDATING DRIVERS, WILL THAT PROGRAM ALSO INSTALL THE NEW AUDIO/VIDEO DRIVERS AND UNINSTALL THE FORMER ONES SO THAT I DON'T HAVE TO GO THROUGH SO MANY STEPS BY MYSELF. I FIND THE DIRECTIONS TO DO THIS FOR MYSELF VERY COMPLICATED.

Hi, I would like to assist you on this matter, however I would need some information from you first. I see that you are running windows 8. What is the make and model number of the computer that you are using? The windows 8 that you are using, is it a 32 bit or a 64 bit operating system? Please write back and I will be happy to do research on this issue.
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Audio and video sticking and jumping after installing windows 8.1

Hello,
I have a HP Pavilion G6 - 2292sa
The product no is C1Y93EA#ABU
I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related.
Any help you could give would be really apreciated.

Hi Greum,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
I suggest you run The HP Support Assistant to look for updates and help resolve issues. You also have a built in troubleshooter in Windows 8 and 8.1.
Press the Windows key +C to open charms
Type troubleshoot audio/video and press enter
Follow the on screen prompts.
If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
Here is a link to a document to assist you with updating.Updating Windows 8 to 8.1. Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Audio and video glitches

Similar Messages

Maybe you are looking for