Audio and video goes off and on during play

Audio and video fade in and out when playing u-tube

Try to disable all other plugin and only leave the Flash plugin enabled to see if that works.
*https://support.mozilla.org/kb/Troubleshooting+plugins
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to disable hardware acceleration in Firefox.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
You can also try to disable hardware acceleration in the Flash player and disable protected mode in the Flash player
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

Similar Messages

How can I play online videos without many long pauses during play?

I have current flash and 7. Lately, all online videos have many long pauses throughout play. They used to play continuously through. Flash is enabled.
How can I solve this?

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video

PPC G5 dual 2.0 Ghz go sleep and video goes off. funs run fast

Hi,
I have a PPC G5 2.0 dual model June 2004 (8 giga RAM)
My problem is as follows:
- I boot machine, I hear the "bong" sound and after few seconds (after gray screen with logo inside) funs begin to run fast and it goes in a kind of "sleeping mode".
- Power led is on and blink slowly
- if I type a key on keyboard or press power switch, machine goes on and video return. The boot seems to continue in background
- after few seconds machine goes in sleep again
- check if was dust on funs or liquid on the basement of MAC
I tried to:
- change battery inside
- reset RAM
- reset SMU
- remove RAM from slot in the right way (strange thing happened about it...when only 4 slots remain with Ram bank machine doesn't boot and power led blink fast 2 times)
- remove video card (Nvidia)
- disconnect both internal HDs leaving connected just one for time
- reinstall from DVD Osx on the other one HD. Install was successfull and during all the installation period, sleep happened 2 times
Thank you everyone

I would remove the network card. May not be related, but it eliminates it. Is the firmware for this component up to date? That is the main concern, if it has sat there dormant, while you have kept the OS up to date, but I doubt you have updated the firmware for the card to match the OS Updates.
Replace the battery with a new one, for a few £ it's a cheap elimination, if it hasn't been replaced in the life of the computer it's a realistic suspect.
I would reset the PMU again after removing the network card and replacing battery.
If it still doesn't start, try a simple trick, get a hair dryer, warm the logic board in the region of the memory controller, above and to the right of the lower RAM bank, quickly replace the cover, and try to start the computer. If that works it may indicate bad joints in the chip mount to logic board. This can be a problem area on the G5 PM.
If you do get the computer going, install 'Temperature Monitor' and keep an eye on the Memory Control chip temperatures. Avoid activity which cause it to fluctuate a lot. I found active banner adverts on some websites caused it. I believe rapidly fluctuating temperatures over time cause stress fractures in the connections to the logic board, or elsewhere.

Audio and Photos are playing out of sync once burnt onto DVD.

Hiya, I've created a slideshow, with music in the background, and when playing it through in the preview mode it all works fine, and the songs start and end where I want them to and all the photos and video clips work. Once it's bunt onto a DVD and played, the audio seems to be running ahead of the photo slideshow and it ends up out of sync. I've tried playing the DVD on the computer and the DVD player. but it makes no difference. Please help!

Are you using transitions in the slideshow? Sometime they play with different timing in the preview mode than they do on a DVD. Try removing the transitions and see what happens.

No audio (only video) on external DV device when playing timeline

I have recently switched from using Premiere 1.5 to Premiere CS3, two days ago.
Before I installed the new Premiere CS3 software, I had the basic DV configuration for my system.
Sony MINI DV deck--talks to computer via firewire
--talks to output monitor via RCA cables
Computer--talks to Sony MINI DV deck (via same firewire)
--talks to external HD
--external standard computer speakers
I was editing on Premiere 1.5 and this enabled me to capture as well as playback the timeline, so that the timeline would show up in my Sony MINI DV deck (as well as output monitor, if turned on) and I could record onto MINI DV tapes.
I just installed Premiere CS3 two days ago and have not changed anything in my setup configuration. I WAS not able to get video until I clicked on the record monitor and changed my playback settings. NOW I can see the timeline play back in my Sony MINI DV deck and I can record onto a MINI DV BUT now I still do not have any Audio.
I have played with the various possibilities in the "playback settings" dialogue box but I am still unable to hear any audio on the MINI DV deck, nor on the tape when I play it back.

Than you Jim!
I have been using AVID for the past nearly four years and the past three months is my first time with Adobe NLE software and I have yet to learn all of its quirks! You have NO idea how much I appreciate it! I'm currently serving as a military news broadcaster, in Iraq, and I had a story deadline to meet this afternoon. Thank you again!

Video/film conversion freezing problem during play...

hiya
i was wondering can anyone help me. i have been trying to transfer films to my n97mini using the ovi package. it seems to convert ok and transfer but when i try to play the films on my phone they all seem to freeze at the 25min to 27min mark during playback, but the sound keeps playing.
thanks in advance for any help.

Hi I have experienced the same video playback freezing problem. This occurred after installing the latest phone os upgrade (N97) . Before this I had no video freeze problems but many memory related issues. In my view what has happened is that memory that was prevoiusly allocatedto video support has been reassigned to address the other memory related issues.. I have also tried to use the video conversion software contained within the PC Suite software and although the video gets converted and copied onto the phone successfully, the video does not work. I dont believe this is a codecs issue as this should be sorted out by the converter utility.. Can you please fix this as soon as possible and issue another os upgrade, preferably one that works on Windows Vista!

Ipod shuts off by itself during play

My Ipod shuts off by itself while it is playing. It does it in the hold mode as well. Please help.

i reset it at first and that didn't seem to work. so i downloaded the itunes version 7.0 again and volia!!! it worked. it hasn't given me that problem. its been 2 days and no shut offs!!

Logic issue with audio and instrm tracks!

Hi!
Iam old Cubase user And i didnt see THAT on Cubase
When i cut a part of audo region or close the end by draging bottom corner of region,it play anyway on empty space
Any ideas?

or.. did you mean that after you've cut audio, and you hit play, you still hear something playing even when visually, the timeline bar shows that there should be silence at that point? if so, this could be something to do with plug in delay compensation.. the visual representation of your arrange window is slightly out of sync with what you are hearing. I think I've seen this happen before in logic under certain conditions, but I'm not sure exactly when. it could be something to do with PDC as I mentioned, so look into that.

Import mov error. "The file has no audio or video stream".

Very interesting. Would this also explain why i was previously able to import some high def files I downloaded and after the reformat of my computer and reload of cs5.5, I'm now not able to use those files? It's very strange. I did a project, used the high def mov files and it came out great. After a mandatory reformat and reload, now the file doesn't want to import into premier. Error message was... "this file has no audio or video stream"... yet they play fine in media player, and one of the files works, but not the rest. Thanks in advance for any help you can provide. Mark

Mark,
Welcome to the forum.
Unfortunately, you have posted to the Premiere Elements Tips & Tricks sub-forum, which is a repository for articles on how to do things in PrElements.
Maybe our MOD, Steve Grisetti, will move this out to the Premiere Pro CS 5 & CS 5.5 forum, where you will get more replies.
After the reformat, did you install Apple's QT Player? If so, what version.
What is the CODEC in those MOV files? That can be very important, but the very later versions of QT Player should install most of the popular CODEC's, that one sees in MOV, MP4, MTS, etc. files.
Good luck,
Hunt

Problem occurs during playing video song or movie

Dear Sir,
I hope u well.I want to discuss you this issue that when I play video song a problem occurs during playing video and screen become white colors for 2 or 3 second after 2 or 3 minutes It happens when i start video.It happens during playing video 4 or 5 times it appers screen for 3 or 4 second.Kindly resolve this issue.

Hello @Adnan113 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, I would uninstall the current browser and download a new one for Windows 8.1. You can do this here.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating.
Have you tried another browser? This link will help you update your browser if needed.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

When watching a movie purchased through I tunes it shuts out several times during play?

When watching a movie purchased through I tunes it shuts off several times during play?

Hello Boris73
Try deleting the tracks from your iTunes library and then downloading them again to test the playback. If it continues, then report the issue to the iTunes Store.
Download past purchases
http://support.apple.com/kb/ht2519
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Audio and video timing thrown off on export to Adobe Media Encoder

Hi.
I have a two and a half minute video which includes a lip-synched character. Everything is working perfectly inside Premiere Pro CS4. When I export this using F4V format, I set it to match frame rate as source then typed in 24fps for good measure.
The audio track is way off after going through Adobe Media encoder however.
The original video (generated in Carrara 7 Pro) was set to 24fps, but it looked like Premiere tried to import it as 29.97 fps. I right clicked on the clip and used Interpret Footage to set it back to 24fps when first setting up this project. (looking in my Project Panel right now, I see the flv icons are all set to 24 fps, but the blue icon representing PremiereProProject is indeed set at 29.93 fps, plus and incorrect size (720x480 px as oppsed to the 608x464 px of my actual flv files).
Seems like it's still pulling in that faster frame rate though when it goes to encode, even though I'm setting stuff to 24fps wherever I see the option.
Any ideas how to fix this (and how to prevent similar problems in the future)?
Again, everything works fine within the Premiere Pro CS4 context. It's just when I export that the video seems to play at a higher frame rate, thus begins running way ahead of the audio.
If there's not a way to fix this (change the project settings) within this file, is there a way to copy all of my data and simply paste it into a Premiere Pro file with the right size and fps? I've now created a custom preset with the correct info.
Thanks

Yeah, I'm pretty sure that was the issue.
I bring my stuff in from a 3d program (Carrara) which exported a png sequence at 24 frames per second (in square pixels). I didn't see an appropriate preset, so I chose a randomish DV preset, with 29.97 fps and .9 pixel aspect ratio. i re-interpreted the footage to set back to the correct framerate (and pixels I think). But when I exported from PremPro, it pulls in that initial Project Stting of 29.97 fps, thus all of my audio is off.
Is there a way to re-set the Project Settings after the fact so I can correct my fps and pixel proportions?
Or is my only choice to reimport my footage to a new project with the corect settings?
Thanks

Changed TV out to off but ipod still only plays audio and no video

Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
Compaq Presario 1500 Windows XP 2 ghz 256 mb ram laptop

It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

My audio and video are in sync, but get out of sync as it goes along?

I recorded an audio file on Garageband and I am trying to line it up with a iMovie video. At first, the audio and video sync up perfectly, but as the video goes along, a delay starts to appear and grows bigger and bigger. Anybody has a solution?

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds. If someone is calling me during that time it says mobile is either switched off or outsid

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please help

You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

Audio and video goes off and on during play

Similar Messages

Maybe you are looking for