Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Similar Messages

ITunes movie playback, audio and video not in sync after upgrade to Mountain Lion

After upgrading to Mountain Lion I have problems with iTunes movie playback, and the audio/video at times stalls/delays, or skips a few seconds, or even gets out of sync. I feared this problem was isolated to my machine until I saw an article online: http://reviews.cnet.com/8301-13727_7-57489874-263/sound-stuttering-after-mountai n-lion-installation/. I have 2011 iMac 27" with 16G RAM and am running the latest iTunes and Mac OS X software, and shutting down extra programs doesn't help. Please let me know of any solution.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Audio and Video not matching up after compression

I made a video that is 3:18 minutes long and after about 2 minutes, the audio and video don't match up anymore. I have 2 clips in the video that i conformed to 24p in Cinema Tools and i think that they are causing this problem. I noticed that Audio rate of the clips that i conformed, does not match up to the clips which are not. For example, the audio rate of my 59.94 fps clips is 48.0 KHz, and the audio rate of my 24 fps clips is, 19219 KHz. Is there any solution to this problem? I read a post that said i would need to re-digitize the clips, but i don't know how to do this. Can anyone help me?

I still can't figure out how to solve this problem. I tried to resample the audio, but still, same things happening. If you watch the video, the audio goes off about 2 minutes into it. The audio is correctly matched up with the video when i view it in FCP, but every time i compress it, audio goes off in the exact some spot. Here is a link to the video- http://vimeo.com/21619542
Message was edited by: Gray McClamrock

Audio and Video not in synch?

Hello, I recently bought my Vado HD, on first using it the video and audio are not in synch on the playback. The video runs slower than the video. I am wary to upgrade the firmware because it seems a lot of people on this forum have gotten more problems since they upgraded...
Any ideas why my audio/video synch is off and how I can fix it would be greatly appreciated.
Thanks in advance,
Jack.

try this link for prior discussion:
http://forums.creative.com/creativelabs/board/message?board.id=vado&message.id=63&query.id=42920 #M63

Audio and video out of synch on export

Hi,
I've searched the forum for this. I have a movie in FCE 4 in which the audio and video are in synch in the time line. The audio was recorded into Logic at 96, noodled, passed into FCE at 48 and then had to be lined up with the video. Then when I go to export, the resulting QT movie is out of synch, the audio now about one second before the video. I'm using QT conversion. My compresson is H.264, quality best, frame rate 30, multi-pass, 640 x 480, format AAC or linear PCM, various sample rates, stereo and mono etc. I've tried various other settings for export, but the problem remains.
What am I doing wrong? Many thanks for any help,
Ray

Hi,
Thanks for the reply. I think you're on the right track. I want the best sound possible, so I record into Logic, knowing I'm going into FCE I record at 96 so an even multiple down to 48. I think a .wav file though, and maybe that's the problem. Into FCE, but other audio there as well from the camera mic, and which I occasionally include in the sound track for ambience. All of this noodled a fair amount and then exported, the intent being to end up in 44, as it will be uploaded to youtube. I switch to 16 bit out of Logic, but the aiff vs wav may be the problem. Do think there might be a better way to do this?
Ray

Audio and video not in sync. went back to previously finished projects and they too are not in sync. What could be the problem?

Audio and video not in sync. Went back to previously edited projects and they too are now not in sync. What could be the problem?

Um ... some useful data?
OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
Neil

Audio and Video not synching after export

I've uploaded DV from my camera into iMovie. In iMovie, audio and video are synching perfectly, but when I export to Quicktime they are off by about a second (or two). I've tried several different "expert settings," but still no dice. I've not had this problem occur before, so I'm confused. Anyone?

Make sure none of your clips are using custom slow motion percentages. Only use what the slow motion slider snaps to. I had the same problem and once I changed my percentages to what iMovie wanted everything exported correctly.

Audio and video not synched up....

Hello everyone. I am having a problem with my i-movie and was wondering if anyone here might know what I need to do to solve it.
The problem is that the audio and video are not synchronized when I capture a movie.
Any suggestions?

Hello and thanks for your help. May I pursue this with you further? I think I figured out how to separate the audio and video, by using the imovie help. What i have now is a green bar that appears all along the bottom of the video frames.
I'm having one problem. When i move the audio, and then play back the track, both the new audio position and the old one play, so I get this echo effect. Do you know how I save it without the old position?
Also one other problem I'm having is that when I record video, for some reason whole chunks of the recording are missing. I don't know what is causing this....

Synching audio and video not working

I recorded a separate audio and video clip of an interview, and I marked the start of the clip with a clapperboard and spoke the take number and contents to make life easier, as I usually do. The gear is borrowed from the college, and for some reason the audio that came out of the Canon 5Dmkiii was really low. This could be the reason why, when I put both the video and audio into their own bin and right click and merge clips, (with the syncronisation point as audio, and under audio tab checking the box to remove audio from AV clip) that the clip doesn't seem to recognise the snap of the clapperboard or something maybe? Is there any way I can correct this, or do I need to synch it manually? If so, is there any quick and easy tutorial on youtube or something that is recommended?

I discovered that if I put markers manually on the point where the clapperboard snaps, and select marker instead of audio as the synchronisation point, then it synchs up the clips properly.

IChat Audio and Video not working correctly...

Hi.
I recently upgraded to Snow Leopard. Before upgrading, I was able to video chat with little to no problem with family over iChat. I just tried it again today for the first time since upgrading to Snow Leopard and the audio is barely working (can only make out every few words, if that), and the video is extremely distorted to where you can sometimes not even tell there are people there. It gets all pixelated and weird. I tried doing the chat with Google Talk and then again with Skype, and had just as many problems with those. My family is using a Mac with an older OS, and they can see and hear me perfectly fine. I'm not sure if the problem is with my computer or with theirs, or if it's just a communication problem, but any ideas would be really helpful. Thanks!

After iChat developed missing audio and video pixellation problem post Snow Leopard installation at my mother-in-law's machine (and ours), I tried the usual decrease the bandwidth fix to no avail.
The solution that actually fixed the probem was to turn off port forwarding protocol on her Time Capsule and our Airport Extreme. Things are now working smoothly even at 500 kbps settings on both ends.
An interesting aside... Turning off port forwarding for ssh to her machine doesn't kill the ssh port tunnel from the outside LAN to her mac. It looks like iChat and the Time Capsule keep an incoming ssh tunnel open even if you have disabled port forwarding on the Time Capsule. I suspect this "secret" opening of ports is the magic of why iChat and screen sharing have been so much easier to set up when a Mac is behind an Apple router. 3rd party routers need ports manually forwarded to the Mac. Apple routers just worked ---- and it looks like Apple does it by invisibly opening ports on their routers when a Mac runs iChat.
Pretty nifty, but also silently opens a security hole that you may THINK you closed. SL seems to trip up over this arrangement when you also turn on Port Mapping Protocol and manually assign ports to forward.
At any rate, it wasn't the data rate, it was a new bad interaction between the Apple Router's Port Mapping Protocol and iChat 5. Turn off PMP on the airport and all becomes well once more.

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Audio and video out of sync after exporting sequence

I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
Video is 61 minutes and 27 sec long
Audio is 61 minutes and 38 sec long
That means exported video is shorter than original sequence.
What could that be ?

I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
Good luck!
Message was edited by: Anthony M Kassir MD

Audio and video out of sync after capture from Canon

Help for a newbie please? I have a Canon XHA1S and have a problem after capturing HD video. After capturing a 40 minute clip, the audio and video are out of sync. Seems like there is about a 3 second difference. The entire clip is like that in the source window; I made a couple of quick edits and have the same problem in the program window. Tried exiting and re-opening PP, but that didn't help. I'm running PP in CS6 on an iMac 3.4 GHz i7 with 8G of ram. Thanks!

I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Audio and video not synchronised at Visio

When I play video at my Zen Vision:M, the audio and video is not synchronised. I don't know if it is all of my video, but at least most of it. The video and audio is synchronised when I play them at my PC.
I have the newest American firmware, .4.0 (because of European volume cap), and the problem did maybe come after updating to this.
Does someone else have this problem, or does someone have a solution?Message Edited by trygveaa on 07-05-2006 02:20 PM

the itunes doesnt play the sound but when its on the ipod it plays back fine till the last 20 mins or so.

Photo Booth Audio and Video not in sync!

I am a YouTube musician. When I go to record I find it easiest to use the video feature in Photo Booth. However, ever since I upgraded to Mountain Lion my audio and video in my videos has been off of one another. They start off together but by the end of the video the audio is ahead of the video. When I went to try and see where it messes up I found that the video jumps frames creating almost a transition effect. I don't know how to fix this and would really like your help!

Check out the "More Like This" threads over in the right column------------>
Also check out KB Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and EZJim's Website for possible solution to your problem.

Audio and video not in synch after upgrade

Similar Messages

Maybe you are looking for