Audio and Video not in synch?

Hello, I recently bought my Vado HD, on first using it the video and audio are not in synch on the playback. The video runs slower than the video. I am wary to upgrade the firmware because it seems a lot of people on this forum have gotten more problems since they upgraded...
Any ideas why my audio/video synch is off and how I can fix it would be greatly appreciated.
Thanks in advance,
Jack.

try this link for prior discussion:
http://forums.creative.com/creativelabs/board/message?board.id=vado&message.id=63&query.id=42920 #M63

Similar Messages

Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Audio and video out of synch on export

Hi,
I've searched the forum for this. I have a movie in FCE 4 in which the audio and video are in synch in the time line. The audio was recorded into Logic at 96, noodled, passed into FCE at 48 and then had to be lined up with the video. Then when I go to export, the resulting QT movie is out of synch, the audio now about one second before the video. I'm using QT conversion. My compresson is H.264, quality best, frame rate 30, multi-pass, 640 x 480, format AAC or linear PCM, various sample rates, stereo and mono etc. I've tried various other settings for export, but the problem remains.
What am I doing wrong? Many thanks for any help,
Ray

Hi,
Thanks for the reply. I think you're on the right track. I want the best sound possible, so I record into Logic, knowing I'm going into FCE I record at 96 so an even multiple down to 48. I think a .wav file though, and maybe that's the problem. Into FCE, but other audio there as well from the camera mic, and which I occasionally include in the sound track for ambience. All of this noodled a fair amount and then exported, the intent being to end up in 44, as it will be uploaded to youtube. I switch to 16 bit out of Logic, but the aiff vs wav may be the problem. Do think there might be a better way to do this?
Ray

Audio and video not in sync. went back to previously finished projects and they too are not in sync. What could be the problem?

Audio and video not in sync. Went back to previously edited projects and they too are now not in sync. What could be the problem?

Um ... some useful data?
OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
Neil

Audio and Video not synching after export

I've uploaded DV from my camera into iMovie. In iMovie, audio and video are synching perfectly, but when I export to Quicktime they are off by about a second (or two). I've tried several different "expert settings," but still no dice. I've not had this problem occur before, so I'm confused. Anyone?

Make sure none of your clips are using custom slow motion percentages. Only use what the slow motion slider snaps to. I had the same problem and once I changed my percentages to what iMovie wanted everything exported correctly.

Audio and video not synched up....

Hello everyone. I am having a problem with my i-movie and was wondering if anyone here might know what I need to do to solve it.
The problem is that the audio and video are not synchronized when I capture a movie.
Any suggestions?

Hello and thanks for your help. May I pursue this with you further? I think I figured out how to separate the audio and video, by using the imovie help. What i have now is a green bar that appears all along the bottom of the video frames.
I'm having one problem. When i move the audio, and then play back the track, both the new audio position and the old one play, so I get this echo effect. Do you know how I save it without the old position?
Also one other problem I'm having is that when I record video, for some reason whole chunks of the recording are missing. I don't know what is causing this....

Synching audio and video not working

I recorded a separate audio and video clip of an interview, and I marked the start of the clip with a clapperboard and spoke the take number and contents to make life easier, as I usually do. The gear is borrowed from the college, and for some reason the audio that came out of the Canon 5Dmkiii was really low. This could be the reason why, when I put both the video and audio into their own bin and right click and merge clips, (with the syncronisation point as audio, and under audio tab checking the box to remove audio from AV clip) that the clip doesn't seem to recognise the snap of the clapperboard or something maybe? Is there any way I can correct this, or do I need to synch it manually? If so, is there any quick and easy tutorial on youtube or something that is recommended?

I discovered that if I put markers manually on the point where the clapperboard snaps, and select marker instead of audio as the synchronisation point, then it synchs up the clips properly.

Audio and video out of synch

Can anyone help. I have just purchased fce4 and already feel way out of my depth. When I captured my footage I get a warning saying that audio and video may be out of synch. Fair enough but there is no advice on how to fix this. Is it something to do with frame rates. My camera is DV Pal. How do I change the settings assuming this is the problem.

Go to Final Cut Express>Easy Setup. You're probably set up for DV-PAL. Change to DV-PAL 32kHz and see if that helps.
I'd encourage you to get a reference book. Tom Wolsky, frequent contributor to this forum, has an excellent one: Final Cut Express Editing Workshop. Diana Weynand has written another one: Apple Pro Training Series: Final Cut Express.

Audio and Video not in Sync (Decklink a/v)

Hello. No matter what I do, Soundtrack Pro's audio and video are not in sync. Audio always comes a slight bit later which makes working in STP really hard. I run STP with a Decklink Extreme, for both audio and video. Any tips?

well i had the same post. kinda. but yeah it is totally limited as a film scoring app, who would have thought. there isn't any way to offset the sync.
Logic would be your best bet, or Pro Tools with DV kit.
FP

Audio and Video Not Synchronizing in the Same Clip.

Ok, So I have had Adobe Premier Pro for a while now an I love it. I just have one not so insignificant problem with it. I was in the middle of making a video (with one particularly long clip in it) and I noticed something that began to happen in the beginning of the clip and went up until about thirty seconds. The audio and video gradually became further and further apart until they were about three seconds off. I was only using one clip so there should be no way I screwed up the placement of the files in the timeline. Viewing the clip in quicktime player does not give me that problem, so it's either a problem with Premiere Pro, or something else that I am unaware of. It has became so bad that I even downloaded iMovie so I could at least get this movie edited. I am pretty new to Premier Pro so any advice is much appreciated. Thanks!

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Audio and video not synchronized in recording made with Lync 2013

There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
cable.
Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
couple of minutes are cut off.
Any ideas on why this happened? Web research has failed me. Thank you.

You may need to lower the recording quality as your PC might not be able to keep up the pace.
Go to Options in Lync client -> Recording -> Select 480p
Then test again
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Home entertainment - Audio and video not in s

I call a Philips LCD 37PFL7403D/0 with [size="">HD Natural Motion technology my own. When I turn on HD Natural Motion feature, audio and video are not in sync anymore. The Philips FAQ recommands to set the audio sync delay to 200 milliseconds (200ms).
I use a Sound Blaster X-Fi Xtreme Audio and I have not found any possibility to adjust the audio sync delay.

Um ... some useful data?
OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
Neil

5G iPod Audio and Video not in Sync

I bought an iPod 30 GB a couple of days before. I was trying to download a movie to it which is in MP4 format. The original movie was in AVI format and I used Videora iPod converter to convert AVI -> MP4, but when I try to view the movie in my iPod the Audio and Video are not in Sync at al. The audio is way ahead of the video. Please someone let me know how to fix this problem. I turned off Equalizer and all other fancy settings in the iPod but it still didn't help.

some encoders have this problem occasionally. I've seen it very frequently in ffmpex when the source is avi. not sure what you're using, but so I'd suggest you try a different software. I'm getting very good results out of handbrake or 42.

IChat Audio and Video not working correctly...

Hi.
I recently upgraded to Snow Leopard. Before upgrading, I was able to video chat with little to no problem with family over iChat. I just tried it again today for the first time since upgrading to Snow Leopard and the audio is barely working (can only make out every few words, if that), and the video is extremely distorted to where you can sometimes not even tell there are people there. It gets all pixelated and weird. I tried doing the chat with Google Talk and then again with Skype, and had just as many problems with those. My family is using a Mac with an older OS, and they can see and hear me perfectly fine. I'm not sure if the problem is with my computer or with theirs, or if it's just a communication problem, but any ideas would be really helpful. Thanks!

After iChat developed missing audio and video pixellation problem post Snow Leopard installation at my mother-in-law's machine (and ours), I tried the usual decrease the bandwidth fix to no avail.
The solution that actually fixed the probem was to turn off port forwarding protocol on her Time Capsule and our Airport Extreme. Things are now working smoothly even at 500 kbps settings on both ends.
An interesting aside... Turning off port forwarding for ssh to her machine doesn't kill the ssh port tunnel from the outside LAN to her mac. It looks like iChat and the Time Capsule keep an incoming ssh tunnel open even if you have disabled port forwarding on the Time Capsule. I suspect this "secret" opening of ports is the magic of why iChat and screen sharing have been so much easier to set up when a Mac is behind an Apple router. 3rd party routers need ports manually forwarded to the Mac. Apple routers just worked ---- and it looks like Apple does it by invisibly opening ports on their routers when a Mac runs iChat.
Pretty nifty, but also silently opens a security hole that you may THINK you closed. SL seems to trip up over this arrangement when you also turn on Port Mapping Protocol and manually assign ports to forward.
At any rate, it wasn't the data rate, it was a new bad interaction between the Apple Router's Port Mapping Protocol and iChat 5. Turn off PMP on the airport and all becomes well once more.

Audio And Video Not Linked

When I drag clips from the Viewer to the Timeline I get audio and video together, but afterwards they are separate. They aren't selected together unless I do a shift-click selection, and even then I can't trim both at once. FCE does seem to remember that they should be in sync because I still get the little red boxes. This is probably just some little setting I inadvertently changed, but I have no idea what. Can someone please help?

eatrains
Linked clips (video and audio) will have an underline below the name, this can be toggled on or off with Modify>Link (Command-L).
For selecting in the Timeline there is a button at the top right. This only selects the video and audio at the same time, it does not Link/Unlink.
Al

Audio and Video not in synch?

Similar Messages

Maybe you are looking for