Audio and Video not synchronized...what's the solution?

Hi,
I was trying to record a video on my webcam (I think its Creative Gamestar) and during playback I noticed that the audio is playing slower than the video; in other words both are not synchronized...what could be the reason for this? Is there a solution.
I used the DivX 6.0 video codec. The audio compressor was MP3 at 48,000 Hz, 6 bits, Stereo. Do I need to use something other codec? Please reply! The reason I used DivX was that the default codec was creative a 2Gb file for a 5 minute video.
Looking forward to replies. Thanks in advance,
Badfan.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Similar Messages

Audio and Video Not Synchronizing in the Same Clip.

Ok, So I have had Adobe Premier Pro for a while now an I love it. I just have one not so insignificant problem with it. I was in the middle of making a video (with one particularly long clip in it) and I noticed something that began to happen in the beginning of the clip and went up until about thirty seconds. The audio and video gradually became further and further apart until they were about three seconds off. I was only using one clip so there should be no way I screwed up the placement of the files in the timeline. Viewing the clip in quicktime player does not give me that problem, so it's either a problem with Premiere Pro, or something else that I am unaware of. It has became so bad that I even downloaded iMovie so I could at least get this movie edited. I am pretty new to Premier Pro so any advice is much appreciated. Thanks!

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Audio and video not synchronized in recording made with Lync 2013

There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
cable.
Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
couple of minutes are cut off.
Any ideas on why this happened? Web research has failed me. Thank you.

You may need to lower the recording quality as your PC might not be able to keep up the pace.
Go to Options in Lync client -> Recording -> Select 480p
Then test again
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Audio and video not matching up at the end of the vid

Im useing videora for ipod and it starts out fine but at the end of the video like last 20 mins the voice slowly start to not match with the video..anyone know what i can do?

the itunes doesnt play the sound but when its on the ipod it plays back fine till the last 20 mins or so.

CS3: Audio and video not synchronized

Hello.
I built a video, and in this video sometimes there isn't the audio track because i cut it. After i exported the video in the avi format, i noticed a big desynchronization, because the audio tracks started earlier than expected. What have i to do?
Thanks
Giulio

What was the format/CODEC of your original source files?
What is your Project/Sequence Preset?
When you Render the Timeline and playback in PrPro, did you hear the OOS (Out Of Sync), or was it only after Export?
What were the full settings of that Export?
Is the OOS static (same over time), or is it dynamic (changing over time)?
Good luck,
Hunt
PS - for general OOS issues, this ARTICLE might be useful.

How can i authenticate my i pod more than 5 times using same id ?? is it possible ? and if not, then what is the solution?

as iam changing the os of my computer(windows) , i need to authenticate it again.

"Authenticate"?
Do you mean authorize?
Ipods are not authorized at all. Authorization applies only to computers.

Audio and video not in sync. went back to previously finished projects and they too are not in sync. What could be the problem?

Audio and video not in sync. Went back to previously edited projects and they too are now not in sync. What could be the problem?

Um ... some useful data?
OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
Neil

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

Where did the media file come from?
Does it use a variable frame rate?
What version of Premiere are you using?
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

I update my device and asked me the Claude and I do not know what is the solution please help me

I update my device and asked me the Claude and I do not know what is the solution please help me note that the issuance of the two is the seventh kind iPhone 4 Q and serial number is 01******343
Please help me
<Edited by Host>

Assuming that you mean iCloud (I don't know what you mean 'issuance of the two is the seventh kind'), then when are you being asked for it and is it your iCloud account's password that you are being asked for or did you buy the phone second-hand ? If it's a used phone and the previous owner left it linked to their account then you will need to contact the previous owner, only they can remove it from their account : http://support.apple.com/kb/TS4515

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

TA20920 Mac original is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message

i got Mac originally version is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message

This message?
http://support.apple.com/kb/TA20920
is a difficult one to resolve.
There is an analysis and suggestions to this problem posted here.
http://www.thexlab.com/faqs/kernelpanics.html

Audio and video not synched up....

Hello everyone. I am having a problem with my i-movie and was wondering if anyone here might know what I need to do to solve it.
The problem is that the audio and video are not synchronized when I capture a movie.
Any suggestions?

Hello and thanks for your help. May I pursue this with you further? I think I figured out how to separate the audio and video, by using the imovie help. What i have now is a green bar that appears all along the bottom of the video frames.
I'm having one problem. When i move the audio, and then play back the track, both the new audio position and the old one play, so I get this echo effect. Do you know how I save it without the old position?
Also one other problem I'm having is that when I record video, for some reason whole chunks of the recording are missing. I don't know what is causing this....

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Audio and Video not synchronized...what's the solution?

Similar Messages

Maybe you are looking for