Audio and Video Not Synchronizing in the Same Clip.

Ok, So I have had Adobe Premier Pro for a while now an I love it. I just have one not so insignificant problem with it. I was in the middle of making a video (with one particularly long clip in it) and I noticed something that began to happen in the beginning of the clip and went up until about thirty seconds. The audio and video gradually became further and further apart until they were about three seconds off. I was only using one clip so there should be no way I screwed up the placement of the files in the timeline. Viewing the clip in quicktime player does not give me that problem, so it's either a problem with Premiere Pro, or something else that I am unaware of. It has became so bad that I even downloaded iMovie so I could at least get this movie edited. I am pretty new to Premier Pro so any advice is much appreciated. Thanks!

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Similar Messages

Photo Booth: Audio and Video not syncing in the same time frames, really annoying

That's the problem.

Same problem here.
1. Reset ACLs
2. reset PRam reset SMC
3. repaired permissions
4. repaired disk
No issues found.
Reinstalled Mountain Lion....
issue is persisting.
FML
Machine seems to be running fine otherwise. Just happened to notice it when I tried to reord a short video of some guitar. Way out of sync. Horrid.
I made a new user account and the issue is continuing.
The only thing I haven't done is is completely wiped the drive and started fresh. Such a pain in the a## to do this. IDK. Definitely wasnt happening on snow leopard.

Audio and video not synchronized in recording made with Lync 2013

There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
cable.
Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
couple of minutes are cut off.
Any ideas on why this happened? Web research has failed me. Thank you.

You may need to lower the recording quality as your PC might not be able to keep up the pace.
Go to Options in Lync client -> Recording -> Select 480p
Then test again
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Audio and Video not synchronized...what's the solution?

Hi,
I was trying to record a video on my webcam (I think its Creative Gamestar) and during playback I noticed that the audio is playing slower than the video; in other words both are not synchronized...what could be the reason for this? Is there a solution.
I used the DivX 6.0 video codec. The audio compressor was MP3 at 48,000 Hz, 6 bits, Stereo. Do I need to use something other codec? Please reply! The reason I used DivX was that the default codec was creative a 2Gb file for a 5 minute video.
Looking forward to replies. Thanks in advance,
Badfan.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

CS3: Audio and video not synchronized

Hello.
I built a video, and in this video sometimes there isn't the audio track because i cut it. After i exported the video in the avi format, i noticed a big desynchronization, because the audio tracks started earlier than expected. What have i to do?
Thanks
Giulio

What was the format/CODEC of your original source files?
What is your Project/Sequence Preset?
When you Render the Timeline and playback in PrPro, did you hear the OOS (Out Of Sync), or was it only after Export?
What were the full settings of that Export?
Is the OOS static (same over time), or is it dynamic (changing over time)?
Good luck,
Hunt
PS - for general OOS issues, this ARTICLE might be useful.

HT204370 why does my video and sounds not play at the same time when watching movies

why does my video and sounds not play at the same time when watching movies

Welcome to the unity.
Upon which device are you watching your movies and are you using a home theatre system for your audio.

Audio and video not in sync. went back to previously finished projects and they too are not in sync. What could be the problem?

Audio and video not in sync. Went back to previously edited projects and they too are now not in sync. What could be the problem?

Um ... some useful data?
OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
Neil

I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do?

Question
I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do? edit

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

Syncing Audio and Video but wish for the Audio not to move on timeline?

Has anyone worked out how to sync audio and video within Premiere Pro but have the Audio stay fixed on the timeline and the video move? Every way I try it Premiere Pro insists on moving the audio. Locking the track does not work as you cannot select the audio within it to Sync with.
I have a music video shoot with 14 camera angles used on the lead singer (don't ask me why). Multi-camera editing is not an option as there are too many sources for my brand new MacbookPro to handle. I think I would need the computer from Superman II to edit that many clips together.
What I am doing is syncing the first clip, the one Im going to use as the baseline fall back shot and then I need to sync other clips onto the timeline. However Premiere Pro insists on moving the audio to fit with the video not visa-versa.
Any help would be appreciated.

@slitchfield: on the mentioned page, it is stated that "Improvements in screen real estate, with slimmer top status bar and optional (in some apps) bottom toolbar, meaning that all phones will have a larger useful display area."
But on the E6 the bottom toolbar decreases available screen size in most apps, most noticeable in Web browser where the full view has gone. The bottom toolbar is not optional, you can't configure it yourself.
And: "Homescreen widgets will now come in up to five different sizes (1x1, 2x1, 4x1, 2x2, 4x4) and allow a greater degree of interactivity.", but on the E6 they are in only one size, always with large borders and other visual effects.
So beware of differences between phones, perhaps some aspects of Belle work differently depending on the type of device.
"Notes now brings up a white (and AMOLED-unfriendly...) editing screen.": that you can change by switching themes, "Dark Solid for Anna" does a good job. It is a shame that the lines of Notes have gone though.
When switching themes, I found you have to restart the phone, otherwise the theme doesn't get properly loaded in all apps. Stopping/starting apps is not enough. So when experimenting and loading one theme after another, you may end up with disfunctional combinations of black-on-black and white-on-white, but it may not be due to the last theme. Also you may end up with a good combination that isn't around anymore the next time you restart your phone.
Current N900 and former E6 user regretting Belle upgrade
Devices owned: 2110, 2110i, Cellular Data Card, 8110, 7110, 6210, 6310i, 6100, 9500, 6233, 5140i, 3109c, N900, E6-00

Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Audio and Video not in Sync (Decklink a/v)

Hello. No matter what I do, Soundtrack Pro's audio and video are not in sync. Audio always comes a slight bit later which makes working in STP really hard. I run STP with a Decklink Extreme, for both audio and video. Any tips?

well i had the same post. kinda. but yeah it is totally limited as a film scoring app, who would have thought. there isn't any way to offset the sync.
Logic would be your best bet, or Pro Tools with DV kit.
FP

Audio And Video Not Linked

When I drag clips from the Viewer to the Timeline I get audio and video together, but afterwards they are separate. They aren't selected together unless I do a shift-click selection, and even then I can't trim both at once. FCE does seem to remember that they should be in sync because I still get the little red boxes. This is probably just some little setting I inadvertently changed, but I have no idea what. Can someone please help?

eatrains
Linked clips (video and audio) will have an underline below the name, this can be toggled on or off with Modify>Link (Command-L).
For selecting in the Timeline there is a button at the top right. This only selects the video and audio at the same time, it does not Link/Unlink.
Al

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

Audio and Video Not Synchronizing in the Same Clip.

Similar Messages

Maybe you are looking for