Audio and Video on the sme RSS feed

I'm trying to place audio and video podcasts (MP3 and MP4) on the same rss feed. The feed validates. When I do audio only, it works fine. When I add a video to the feed, only the video displays in iTunes.
Do I have to run two seperate feeds?
Thanks

You can't play both the audio and the video simultaneously, you'll need to merge them.
Neil

Similar Messages

  • Can i take both Receveing of audio and video on the same window.

    hi,
    i m using AVTransmit2 and AVReceive2 for Transmission and Receiving all is doing well but problem is that AVReceive2 show Transmission of audio and video in both different windows and it use different players for audio and video. Can u tell me can i merge both audio and video at the receiving end. i m already mergeing audio and video at transmission end ???. any one tell me how can i solve this problem ???
    thx in advance.

    Hi,
    I have the same situation - to use one window to show both rtp audio and video stream, but use the ControlPanelComponent of audio player to control both players.
    I want to use the audio player as the master player so that the video player could be synchronized with it. So: audioPlayer.addController(videoPlayer).
    In the only window frame for both players, I want to show the VisualComponent(VC) of video and the ControlPanelComponent(CC) of audio. So I add both components respectly to the window frame, after I got them from each player. Because the streams are coming from the network over RTP, and they do not become realized at the same time, I add the VC and CC of first realized player(no matter it is audio or video) to window frame at first, and then change them to the desired video VC and audio audio CC.
    Though I check both player are realized and not started before I call the addController() method, the application stucked in this method. Of course I call it in a try block but no exception was thrown out.
    when I use TimeBase to synchronize them, i.e., videoPlayer.setTimeBase(audioPlayer.getTimeBase()), everything goes fine. But, I can not control both players from one ControlPanelComponent in this way.
    Anybody having any idea to solve this problem please reply.
    By the way, in the example code such as AVReceiver, where audo and video streams are shown on two window seperately, user can use the ControlPanelComponent of audio to control both player, though it seems no relevant code to support that function. The ControlPanelComponent of video can not control the audio player anyway. Anyone having any explanation to this?

  • Connecting Macs to Samsung Smart TV #UN55F7100AFXZA for Audio and Video form the TV

    I have a all Latest, Macbook pro, Macbook Retina and Imac 21.5" i brought a samsung smarttv, and its model number is UN55F7100AFXZA and i need to connect any of my product to the Tv, i need the video and audio coming from the Tv so how can i do this?????? budget is no limit, for a costly tv like that i dont  mind so i need you mac geniuses to help me connect any of my products to the Smart tv perfectly so the Audio and Video comes out of the TV, this is my first discussion and juust got my products 3 days ago so i did not try anything i will go with your opinions so at the end i would like to say is i want my Apple Product ( listed above ) to connect to Samsung Smart tv and Get audio and vdeo from the TV.
    Thank you in Advance
    (if you can solve it)
    i will make a youtube video prasing your name

    Hi Kingofmacs,
    Thanks for visiting Apple Support Communities.
    If your MacBook Pro and TV both have HDMI ports, you can use an HDMI cable to connect the two.
    This article can help confirm that your MacBook Pro has the necessary HDMI port:
    Mac Basics: Ports and connectors
    http://support.apple.com/kb/HT2494
    Ports on a MacBook Pro with Retina display:
    You may need to use an adapter to connect your iMac to your TV. This article has more information about Apple video adapters:
    About Apple video adapters and cables
    http://support.apple.com/kb/HT3235
    Once your TV is connected to your Mac, you can configure it using the Displays section of System Preferences. See this article for more information:
    OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
    http://support.apple.com/kb/ht5019
    Best Regards,
    Jeremy

  • Razor blade tool not cutting audio and video at the same time

    Hiya,
    When using the razor blade tool in a timeline, my razor only cuts the video track, or one audio track at a time. The audio and video were imported together.
    I would like for the video and two audio tracks to be cut at the same time--so that when I'm cutting I don't have to click three times (VA1A2).
    What needs changed to do this? Thank you!!!!
    A little annoying -- but would be a time saver. Never had this problem before FCS2.
    Thanks again!

    Are the video and audio clips linked? If they're not, the cut will only apply to the track under the blade tool.
    -DH

  • Audio and Video on the same page.

    Is it ok to have a separate audio and video file on the same page?  Both are set to auto play with no controls but when I try this set up the audio seams to override the video, stopping the video a few seconds later.
    I guess I could try and embed the audio into the video but if I did not have to I was not going to.
    Any suggestions or help is appreciated.
    Thanks,
    Ryan.

    You can't play both the audio and the video simultaneously, you'll need to merge them.
    Neil

  • When exporting separate audio and video streams, the audio drifts out of sync

    So this is my first slightly larger project in Final Cut Pro X.
    When I export my finished project (around 12 minutes long) straight to quicktime, it plays back perfectly.
    When I export using compressor, the resulting audio and video streams are two different lengths. The audio comes out a full second longer. If you try to lay them down in a program like Adobe Encore, the audio starts out perfectly in sync. Two minutes in you notice the video is slightly out of sync with the audio. By the end of the video it's comically bad, over a second out of sync.
    What's even more vexing is if I try to take the quicktime file that IS in sync upon playback, and try to convert it burn that to a dvd or blu-ray using toast, the problem re-emerges.
    I triec searching around, but most of the suggestions that came up were vauge, like, "Upgrade to a real program like Final Cut." (This was in reply to people who were using free software programs.)
    I did see one idea surface where 44 and 48 kHz sampling rates don't play well together. So I combed through my project and found all the 44.1 songs that were used, and swapped them out with upsampled versions. Nothing changed. It didn't sound like it would fix it, as people usually said it was a specific amount of frames off, not something drifting out of sync.
    So the question is, does anyone have any suggestions on what could be causing this? Thanks! :-)

    Project settings can be accessed and changed by selecting the project and pressing command-J. Then, in the inspector, click on the little gear in the lower-right hand corner to access the settings.
    Why are you trying to output video/audio separately? If the content plays in-sync when exporting a quicktime movie (using current project settings), you could try separating the video/audio using MPEG Streamclip as a second step instead of using compressor. For audio, don't change the sample rate from the project settings, and use uncompressed audio (AIFF) as the output format.

  • I have old IPad and down load new software. It completely distort my ITune set up. I use to have audio and video in the ITune, now it's separated audio and video in different category. And I can not set group or alphabetical tap to pull out video.

    If set them up in the group sush as; comedy,action,drama,ect. It would be nice.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Does the mini displayport able to transfer audio and video to an external monitor (example: a tv) using a 2011 13" MacBook Pro with an hdmi cable?

    I was wondering this, because I want to hook up my 2011 MacBook Pro to a external monitor (TV) using an hdmi cable.  This would be heplful before I buy a mini displayport to hdmi adapter, and then maybe find out that the mini displayport might not transfer audio, only video.

    Yes, min Displayport supports audio and video for the 2011 MBP 13" via HDMI.

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • 8.1 Pro install now have no audio and video play

    I have an older G60-443cl and changed out the HDD for a SDD.  Installed a new version of Windows 8.1 Pro.  Everything works but my audio and video.  The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume.  I went to my adminastrative tools and checked and the following is what i guess i should have:
    Open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Startup Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    I have all of the item but the top one Audio Service????     Help!!!!! Please!

    Hi @L1215 ,
    Welcome to the HP Forums!
    It is a grand place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio.  Drivers are showing as installed and working properly but you have not audio.
    When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System.  With this being said HP does not provide the drivers as it is an untested OS on your system.  OEM's may and sometimes do alter drivers to perform correctly with your system.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
    The best of luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Poor Audio and Video Quality

    Using IDVD to burn iMovie containing pictures and music and am getting very poor quality audio and video. The video is very low resolution, lacking clarity and definition, and the audio comes out really flat with over-saturated vocals that is unpleasant to listen to.
    The content was made from iMovie 11, importing photos from iPhoto and iTunes music.
    I exported the movie via Share->Export Movie-> HD 1080P
    In iDVD 7.1.2 I imported the movie (actually several) into a slideshow menu item.
    I used the iDVD encoding preferences set at 'Best Performance' and 'Professional Quality' with no difference between the two
    Then to ensure it wasn't the DVD disk causing the problem, I used the 'Save as Disc Image', and validated the file image saved to disk had the same quality issues as the burned DVD.
    Then to eliminate the iMovie as the problem, ran a test and used an iPhoto slideshow in place of the iMovie, and it also has the same low quality issues.
    I have observed that using the iDVD viewing capabilities, the A/V quality is fine. Its after the burn to disk the problem occurs.
    At this point I'm not sure what to try. I'm viewing the DVD on my 50" widescreen TV using Sony DVD player.
    A year or so back I did similar steps and the DVD came out fine... the sound quality was excellent and the video quality while not outstanding, was reasonable.
    Any ideas -- I'm really stumped.

    Hi
    In iMovie'11 - I do (not use Share to iDVD)
    • Share to Media Browser - AND AS Large - NOT HD ! (result will not be better but rather WORSE)
    • In iDVD I import from Media button and Movie tab.
    Yours Bengt W

  • Skype V. 7.6 (409) Mac audio and video problems

    I am getting inconsistent problems with audio and video. Here are the problems when calling three different contacts.
    1. Audio to Audio worked fine with my first contact, but trying to add video crashed the audio. This happened when I tried to add video, and also when the other person tried to add video. These same problems persisted regardless of who called whom. In the end, we had a good audio to audio conversation and were also able to send messages and share files without problems.
    2. My audio and video were received by the second contact, but I could not receive audio or video from them. These same problems persisted regardless of who called whom. In the end, I used audio and video while the other person typed messages in response.
    3. My audio and video were received by the third contact, and I could receive their video, but they could not hear my audio. These same problems persisted regardless of who called whom. We didn't bother trying to continue our conversation.  
    So, I checked all my settings to ensure audio and video were properly set up. Also, I made a successful skype test call. It is very puzzling to me since the results were inconsistent with each of these contacts. If the same problem existed at my end, then I could expect a hardware or driver issue on my computer, but sometimes the other person had the problem, I think. Can anyone help? Cheers

    Lueh, try the steps outlined in the KB below. Looks like there is an issue with the full text index that can be resolved by removing/rebuilding.
    http://blogs.skype.com/2015/03/18/skype-7-6-for-mac/
    Please feel free to get in touch if you need any help.
    Cheers,
    Lando

  • Audio and video clip lengths differ in encore timeline

    Hi
    I have been working to build a BD-R H.263 ac3 disk.  I used AME from within Premiere Pro to export the M4V and (at the same time) AC3, using the present defualt parameters-no tweaking of any setting.  The clips appear to play great on encore's monitor--everything in sync.And on the burned BD-R
    However, I am getting the black screen between clips in the timeline when played in the standalone BD player, or (when I had one clip to a timeline) in a playlist.  a previous poster made note of different length audio and video clips.  I zoomed on the timeline and lo and behold--the  the audio and video clips are different lengths.
    This is with the timeline fully expand--each division is a frame. Note that break between the two audio clips is offset from the break between the two video clips by two frames.  This offset is after several clips.  I could find no information on what the one frame crosshatching at the end of the leading clips means.  Can anyone explain this cross hatching?  What do I do about it?  the image below is after the first clip in the timeline:
    In this image, the offset is less than a full frame??????
    I tried using the trim tools to bring these together-but, the trim tool only lets it jump a full frame and then only to a GOP boundary, which doesn't help because the boundaries are obviously different fro the video and audio track.
    I want to emphasize that these assets were created from the Premiere CS4 timeline (which had no offset between audio and video) using the default H.263 and AC3 presets in AME and the same presets selected in Encore.
    The offsets do not appear to cause the actual audio and video to go out of sync when I play the burned disk. But, I get the 1-2 second wait between menus and chapters, or with items in a playlist.
    The audio offset suggests that the player may not know what to do when faced with a chapter point that is different on the audio and video tracks, although, I will note that encore snapped to the joints in the video track not the audio track.
    You can see from this listing that several of the clips audio and video lengths that differ by one frame.  By the end of the timeline, the cummulative offset is 3 seconds (48 minute timeline)
    Can anyone shed any light on this?  Thanks

    I don't think that I had the same problem that you do, but I thought I'd throw in my two cents just in case it might help. Encore would not build the output; it said something like the inpoint and the length did not match the endpoint. Actually, I think this happened in several different situations. In one case I simply adjusted the audio and video tracks to match endpoints. In the other case I went back to Premier and found that in some cases where I had added transitions it had shifted the endpoints of the audio and video tracks so they did not match. I removed the transitions. It didn't matter that much to me since I'm doing this for personal use. Is it possible those crosshatched lines you're seeing are transitions?
    I am using CS 3 and editing HD. I have had many problems with encore. I read in the form someplace that it had a hard time handling H.264 so I changed to MPEG-2 and that fixed one problem. In another case it couldn't find some files and I found some advice not to use HD or wide menus, so I switched to standard 4:3 menus and it worked.

  • Adobe Presenter - audio and video

    Could someone please tell me the difference between adding
    audio and video to a PP presentation via PowerPoint vs. importing
    and adding audio and video using the Presenter tab?
    Also, I'm looking for a list of things that won't work when
    publishing. For example, I noticed that animations, slide
    transitions and QuickTime movies won't work after publishing.
    Thanks SO much.
    Leona

    Check out the documentation on Presenter -- there are some
    very specific ways you need to add audio (use "Record Audio" or
    "Edit Audio" in the Presenter menu) and video (use "Insert video"
    in the Presenter menu).
    Powerpoint has facilities to do these things as well, but
    Presenter won't be able to publish them, from what we've
    determined.
    For animations, again, read the documentation carefully --
    all your animations have to be set to "On Click" or "With Previous"
    -- i.e., they can't be timed animations. Again, Presenter won't be
    able to translate these timed animations -- you must "click" them
    into view (you do this as you're recording audio with "Next
    Animation", or you can do it after recording audio using
    "Synchronize Audio").

Maybe you are looking for