Audio and video out of sync after import

I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
Any ideas?

Thanks. Here's the output:
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 1.05 GiB
Duration : 51mn 20s
Overall bit rate mode : Variable
Overall bit rate : 2 937 Kbps
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Writing application : HandBrake 0.10.1 2015030800
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 51mn 20s
Bit rate : 2 606 Kbps
Width : 720 pixels
Height : 478 pixels
Display aspect ratio : 4:3
Frame rate mode : Variable
Frame rate : 24.145 fps
Minimum frame rate : 0.167 fps
Maximum frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.314
Stream size : 957 MiB (89%)
Writing library : x264 core 142 r2479 dd79a61
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio #1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 51mn 20s
Bit rate mode : Variable
Bit rate : 132 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 47.9 MiB (4%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : ac-3
Duration : 51mn 20s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 70.5 MiB (7%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Menu
ID : 4
Codec ID : text
Duration : 51mn 20s
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Bit rate mode : CBR
00:00:00.000 : Chapter 2
00:01:50.877 : Chapter 3
00:03:59.218 : Chapter 4
00:13:26.285 : Chapter 5
00:20:57.685 : Chapter 6
00:32:58.489 : Chapter 7
00:39:14.031 : Chapter 8
00:50:51.611 : Chapter 9

Similar Messages

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Audio and video out of sync after exporting sequence

I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
Video is 61 minutes and 27 sec long
Audio is 61 minutes and 38 sec long
That means exported video is shorter than original sequence.
What could that be ?

I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
Good luck!
Message was edited by: Anthony M Kassir MD

Audio and video out of sync after capture from Canon

Help for a newbie please? I have a Canon XHA1S and have a problem after capturing HD video. After capturing a 40 minute clip, the audio and video are out of sync. Seems like there is about a 3 second difference. The entire clip is like that in the source window; I made a couple of quick edits and have the same problem in the program window. Tried exiting and re-opening PP, but that didn't help. I'm running PP in CS6 on an iMac 3.4 GHz i7 with 8G of ram. Thanks!

I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

FCP 7.0.2 - audio and video out of sync after QT export! HELP!

I loaded a self-contained movie of my project and exported it through Compressor. However, half way through the video, the audio and video went out of sync.
This has never happened before — only since I upgraded to 10.6.3 and FCP 7.0.2/Compressor 3.5.2
HELP!

(P.S. I did change the Settings of the FCP from 720p60 to 720p30 about half way through the project, but that shouldn't affect the export.)
About the time you changed FCP Easy Setup from 720p60 to 720p30 DURING Export?
As you stated on this post:
http://discussions.apple.com/thread.jspa?threadID=2384569&tstart=0
I wouldn't think that's the best time to make a major change.

Audio and video out of sync after converting to mp4

I've tried 3 converters (ImToo, Xilisoft, and Videora) and for 2 videos I really want on my ipod, the audio and video are offset. Infact, on Xilisoft, one wouldn't even convert (to anything ------as both are WMV and I thought that might be a problem--but I found I had another WMV that had the audio matching the video fine). For the other vid., I tried on Xilisoft making it an AVI first, but that AVI also had messed up audio/video
This is a really broad question, but what can I do and what programs can I try to get the videos to convert properly??
(I've tried uploading the wmvs to itunes to have itunes "convery for ipod", but they wouldn't even upload to itunes)
30gb video ipod Windows XP

I have also had similar problems. Unfortunatly i have yet to discover a program that works perfectly. Just keep searching is really all i have to say. However if you do find it, could u please post it

Audio and video out of sync after making subclip

I split into subclips about one hour of video. when I play the subclips back in the viewer the audio is at the beginning and the video is at the very end with alot of black space in between. when i watch the original one hour clip in the viewer it's perfect.

I captured a whole tape via "capture now" then went back and viewed it using markers to select scenes for my subclips. The played back tape is fine but after making subclips out of my markers the audio is at the very beginning of the clip and has a timecode of 00:00:00;00 (black screen in viewer), then a few minutes of black screen with nothing, then my video with the proper timecode as shown in browser and elsewhere. Each clip has a audio timecode of 00:00:00;00 and the video has the correct timecode. I can unlink them in the timeline and sync them but this is way too much work plus it doesn't really sync them anywhere but in the timeline and canvas. In the viewer I get the little editing ques and boxes that show where video and audio are, you know the little frame in/frame out "L"'s and they read exactly what I'm getting.ie. audio at 00:00:00;00 and video elsewhere.

Audio and video out of sync after transfer to new computer

My son had 9 minutes of a stop motion video, including audio tracks nearly finished but we needed to move the project from his laptop to our imac desktop. Now when project plays the audio is distorted. When you preview the tracks in the edit window, they sound fine, but when you play the whole project all audio clips stutter. Any ideas how to fix this problem would be greatly appreciated!

Depending on the speed of your computer, the project's audio may lag during real time playback. Have you tried exporting it to a DVD? Even if it didn't work well in iMovie it might still burn fine...

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and video out of sync on short recordings

I've scanned the discussions and see that alot of posters are experiencing
the same problem I'm having which is recording quicktime movies
and getting audio and video out of sync.
In most of those posts the responses seem to be that the problem gets
bad if you're making a long recording. I'm experiencing that, but...
...I'm also having the same problem on really short recordings...less than a
minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
Any thoughts on why even short recordings through Quicktime are out of sync?
Thanks.

I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

Compressor audio and video out of sync

I've edited DV video in FCPX (where audio and video are in sync), sent to Compressor, and added the Dolby and MPEG-2 settings to my submitted job. But when I add the output files to Toast, the audio and video are not in sync. Reviewing the video in Compressor, it appears they are out of sync there as well (though it's hard to tell due to the choppiness of the playback there).
Any idea why this is occurring?

Try filling each gap in the audio timeline AND / OR set your encoding to CBR (Constant Bit Rate), not VBR. In some cases the DECODING part tries to fill gaps by "pulling" the next part of the audio if the stream has been encoded with VBR. Good luck.

Audio and video out of sync on converted AVI file

I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

Walter0325
If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
Please do not hesitate to ask if you need clarification on anything that I have written.
Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
Thank you.
ATR

Audio and Video out of Sync in Encore 2.0

Here's my issue:
I opened a project in Encore 2.0 that was an Encore 1.5 project. I have one timeline with a 2 hour movie and the AC3 audio file that goes with it. Encore 1.5 played the audio and video in sync from the timeline and burned discs with the audio in sync. The video is an MPEG2 file encoded at a 3.1 constant bit rate.
In Encore 2.0, when I play the timeline, the audio becomes progressively out of sync as it plays. Within the first few minutes it's maybe a frame or 2 off. By the end of the film it is about 18 seconds off (audio is playing ahead of the video).
Is this a result of Encore 2.0 conforming the audio file? If so, how am I (or anyone) supposed to attain sync between video and audio in Encore 2.0?
I have Encore 1.5 and 2.0 both installed on the same machine. As a test, I opened the project in 1.5 and played it, everything was fine. I closed Encore 1.5 and opened the project in Encore 2.0, and the audio is out of sync.
Any comments, ideas or suggestions?
Mike

Joe,
I tried creating a project with the original WAV file and it's corresponding video and found that the audio and video were still out of sync. I did a little more testing and discovered that the audio is actually being played correctly, it's the video that is not being played correctly. Here's what I did:
I opened the WAV file version of the audio file in Premiere Pro and noted where a hammer hit in the video occurs (01;40;30;28). I then opened Encore 2.0 and imported the video and AC3 version of the WAV file, placed them in a timeline and the audio's hammer hit is right where it's supposed to be (01;40;30;28), but the video's hammer hit occurs at 01;40;43;18.
Next I went into Encore 1.5 and brought in the AC3 audio and video files and placed them on a timeline. I went to 01;40;30;28 in the timeline and the audio and video were both at the frame they should be at that timecode.
Seeing how the video appears to be playing incorrectly, here's some info on my video files:
I have 4 versions of the same film in varying encode rates with the same start and end timecodes. All four files were encoded on a Sonic DVD Creator authoring station using hardware to encode. The files are encoded at the following rates: 2.9 constant bit rate, 3.1 constant bit rate, 3.4 variable bit rate and 4.0 variable bit rate. They are each NTSC with drop frame timecode. All four files play correctly in Encore 1.5 but incorrectly in Encore 2.0.
This almost seems like a drop frame/non-drop frame issue. Do you have any ideas?
Mike

Audio and video out uf sync

I'm using Premier elements 12. When I open a VOB file, the audio and video are not in sync. I can open that same file with windows media player and all is well. What do I need to do with respect to editing a file like this?
The information about the display on my computer is:
Name NVIDIA GeForce GT 220
PNP Device ID PCI\VEN_10DE&DEV_0A20&SUBSYS_069A10DE&REV_A2\4&22063C0D&0&0018
Adapter Type GeForce GT 220, NVIDIA compatible
Adapter Description NVIDIA GeForce GT 220
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.3523
INF File oem38.inf (Section002 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 60 hertz
Bits/Pixel 32
Memory Address 0xFA000000-0xFAFFFFFF
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0x0000EC00-0x0000EC7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Thanks,
Pete Blair

Pete Blair
In all your information, I did not see what computer operating system your Premiere Elements 12 is running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
Your issue may relate to the details of your "VOB file" and how it was ripped/copied from the DVD-VIDEO and DVD disc to get it into a Premiere Elements project.
a. project preset set for NTSC DV Standard or NTSC DV Widescreen (whichever corresponded to your recording details)...or PAL equivalent.
b. DVD disc in burner tray
c. Add Media/DVD camera or computer drive/Video Importer/.....
It does not happened often, but if audio is out of sync and you are not using the above route, then consider the Command Prompt way described in the
following
ATR Premiere Elements Troubleshooting: PE: DVD-VIDEO/Seamless VOB Ripping
A just in case note, contrary to some, it is not necessary to convert VOB (VTS_01_1.VOB video file and any files in that series) to any other format in Premiere Elements.
Please review and consider and then we can decide what next.
Thank you.
ATR

Audio and video out of sync on iPod

The videos I have imported to watch on my iPod appear to play well with one major exception. The audio and video are badly out of sync. I have yet to find a solution to the problem. Can someone please help me?

The videos I have imported to watch on my iPod appear
to play well with one major exception. The audio and
video are badly out of sync. I have yet to find a
solution to the problem. Can someone please help me?
I've got the same problem on the Mac side.

Audio and video out of sync after import

Similar Messages

Maybe you are looking for