Audio and video settings,

very strangely cant seem to find the audio and video settings in my system preferences tool. any ideas? want to change some settings on my camera and video.
thanks

Hmmm, are you looking for the Final Cut forums perhaps?
http://discussions.apple.com/forum.jspa?forumID=939
http://discussions.apple.com/forum.jspa?forumID=936
regards, Erik.

Similar Messages

My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

How to get audio and video in one file

hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video. Delete the old, no-longer-synced audio and you should be set.

Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Audio and video out of synch on export

Hi,
I've searched the forum for this. I have a movie in FCE 4 in which the audio and video are in synch in the time line. The audio was recorded into Logic at 96, noodled, passed into FCE at 48 and then had to be lined up with the video. Then when I go to export, the resulting QT movie is out of synch, the audio now about one second before the video. I'm using QT conversion. My compresson is H.264, quality best, frame rate 30, multi-pass, 640 x 480, format AAC or linear PCM, various sample rates, stereo and mono etc. I've tried various other settings for export, but the problem remains.
What am I doing wrong? Many thanks for any help,
Ray

Hi,
Thanks for the reply. I think you're on the right track. I want the best sound possible, so I record into Logic, knowing I'm going into FCE I record at 96 so an even multiple down to 48. I think a .wav file though, and maybe that's the problem. Into FCE, but other audio there as well from the camera mic, and which I occasionally include in the sound track for ambience. All of this noodled a fair amount and then exported, the intent being to end up in 44, as it will be uploaded to youtube. I switch to 16 bit out of Logic, but the aiff vs wav may be the problem. Do think there might be a better way to do this?
Ray

Audio and video out of sync after import

I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
Any ideas?

Thanks. Here's the output:
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 1.05 GiB
Duration : 51mn 20s
Overall bit rate mode : Variable
Overall bit rate : 2 937 Kbps
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Writing application : HandBrake 0.10.1 2015030800
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 51mn 20s
Bit rate : 2 606 Kbps
Width : 720 pixels
Height : 478 pixels
Display aspect ratio : 4:3
Frame rate mode : Variable
Frame rate : 24.145 fps
Minimum frame rate : 0.167 fps
Maximum frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.314
Stream size : 957 MiB (89%)
Writing library : x264 core 142 r2479 dd79a61
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio #1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 51mn 20s
Bit rate mode : Variable
Bit rate : 132 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 47.9 MiB (4%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : ac-3
Duration : 51mn 20s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 70.5 MiB (7%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Menu
ID : 4
Codec ID : text
Duration : 51mn 20s
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Bit rate mode : CBR
00:00:00.000 : Chapter 2
00:01:50.877 : Chapter 3
00:03:59.218 : Chapter 4
00:13:26.285 : Chapter 5
00:20:57.685 : Chapter 6
00:32:58.489 : Chapter 7
00:39:14.031 : Chapter 8
00:50:51.611 : Chapter 9

Audio and video out of sync after exporting sequence

I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
Video is 61 minutes and 27 sec long
Audio is 61 minutes and 38 sec long
That means exported video is shorter than original sequence.
What could that be ?

I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
Good luck!
Message was edited by: Anthony M Kassir MD

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Audio and video out of synch

Can anyone help. I have just purchased fce4 and already feel way out of my depth. When I captured my footage I get a warning saying that audio and video may be out of synch. Fair enough but there is no advice on how to fix this. Is it something to do with frame rates. My camera is DV Pal. How do I change the settings assuming this is the problem.

Go to Final Cut Express>Easy Setup. You're probably set up for DV-PAL. Change to DV-PAL 32kHz and see if that helps.
I'd encourage you to get a reference book. Tom Wolsky, frequent contributor to this forum, has an excellent one: Final Cut Express Editing Workshop. Diana Weynand has written another one: Apple Pro Training Series: Final Cut Express.

Capture audio and video files to seperate files

Forum,
Having suffered problems with OS 10.5 and Quicktime 7.4.1 I have done a clean install with 10. 4 .11.
When I select capture the following notice appears
"Audio only capture selected,video preview disabled"
In system settings "capture audio and video to seperate files " is NOT checked.
But that may not mean the same as the statement in in the capture window.
I have searched HELP and a book called" Optimizing your Final Cut Pro System" but can not find an answer.
Advice would be appreciated.
Thank you
Michael Craven

Hi,
Check this:
in Log & Capture window select Clip Settings tab and make sure video box is checked.
Cheers,
G.

How to fix problems between audio and video sync?

Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
Thank you

I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit. The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been. I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
-DH

Strange export result in FCP 7- audio and video output not in sync anymore

I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
What could that be ?

Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync. And one section of tape which I captured twice was in sync on one clip and out of sync on the other. So it can't be the tapes.
Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

Audio and video settings,

Similar Messages

Maybe you are looking for