Audio and Video skipping and jumping

WUTFDT3   getTV channel is skipping and jumping in the audio and video. It will skip and jump for about 10 to 20 seconds and then be fine for 30 seconds to a minute. Does anyone else have this problem or is it just me

Your internet connection might be the problem. I am a fellow student also and my school's wireless network is always slower than the ethernet. And also, did you try to watch the TV show while it is downloading? I know it can but I suspect that might be the problem too. (so basically I don't know what is going to too) But if there is a ethernet port on your wall use the ethernet connection and watch it after it downloads completely. You also said that you purchased it twice? You don't have to do that. Email Apple and they should let you download it again for free and maybe they can give you credit for the second download. Here is the link:
http://www.apple.com/support/itunes/store/download/
Good luck.

Similar Messages

  • Audio and video sticking and jumping after installing windows 8.1

    Hello, 
    I have a HP Pavilion G6 - 2292sa
    The product no is C1Y93EA#ABU
    I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related. 
    Any help you could give would be really apreciated. 

    Hi Greum,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been  unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
    I suggest you run The HP Support Assistant to look for updates and help resolve issues.  You also have a built in troubleshooter in Windows 8 and 8.1.
    Press the Windows key +C to open charms
    Type troubleshoot audio/video and press enter
    Follow the on screen prompts.
    If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
    Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Here is a link to a document to assist you with  updating.Updating Windows 8 to 8.1.  Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Why is Audio and Video Skipping, Pausing, FF'in in iTunes 11.0.1 (12)

    I've got iTunes 11.0.1 (12) installed on my MacMini (2007, Liion 10.7.5,4GB of RAM).  I use a 2TB WD MyBook to store my library. As of a week to 10 days ago, audio and video started skipping during playback.  Not all tracks or vids.
    I last updated iTunes on 12/19.
    What do I do?  Should I downgrade to the previous version?  Or does someone else with a similar problem have a solution?

    Looks like it was an external drive problem.  Once I saw vids were skipping other video players, and file transfers from The WD drive paused and started like the videos played told me it was a hardware problem. No more Western Digital drives for me.

  • Audio and video skip after installing USB Sound Blaster Audigy 2

    Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

    Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
    S?rgio

  • Upon insatlling firefox, my video player ( I was trying to watch your welcome clip) is skipping and the audio is also skipping?!

    I am operating a HP mini 2010, upon installing firefox my video player started skipping both audio and video. This is the firefox weclome video?

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
    Try to "disable the hardware acceleration" in the Flash Player.
    *http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    See also:
    *https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
    Flash "Display settings" window:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • Photo Booth Audio and Video not in sync!

    I am a YouTube musician. When I go to record I find it easiest to use the video feature in Photo Booth. However, ever since I upgraded to Mountain Lion my audio and video in my videos has been off of one another. They start off together but by the end of the video the audio is ahead of the video. When I went to try and see where it messes up I found that the video jumps frames creating almost a transition effect. I don't know how to fix this and would really like your help!

    Check out the "More Like This" threads over in the right column------------>
    Also check out KB Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and EZJim's Website for possible solution to your problem.

  • SCCM 2012 Client and Workstation Audio and Video Problems

    SCCM 2012 SP1 environment.
    We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI.  As an example,
    on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors.  With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
    and with a video the audio and video get out of sync.  As well, my mouse no longer functions smoothly - it jumps around.  This happens whether accessing content from a website or simply a local file on my computer.  If I uninstall the SCCM client,
    the issue goes away entirely.  I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
    happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
    At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well.  I believe these stations
    have DVI connected monitors.  Driver updates do not appear to resolve the issue.
    Has anyone experienced this in their environment?  Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

    Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
    ccmsetup.exe /skipprereq:silverlight.exe
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Audio and video track strangeness

    Hi,
    I have a few camera angles that have 4 audio tracks associated with them, and other camera angles that are just one track...
    I was attempting to stack all of my camera angles in fcp, so that I could sync the audio up for the various angles, and then cut between them and drag various pieces to the top video track (I assume this is a standard way of working).
    Anyway, so the problem I was experiencing was, I had one video track with one audio track, and then the next video track above that had 4 audio tracks connected to it... So if I tried to take a slice of the 1st video track, and move it to the next track, the audio would go ontop of one of the 4 tracks....
    I thought I could solve this by locking the video and deleting 3 of the audio tracks so everything would just have 1 audio channel (I dont need the other 3 for my editing purposes)... However, it still causes the audio to behave oddly and jump 2 tracks rather than one....
    How do I fix this?? I don't even understand what is really happening here.
    -p

    Hmm after looking at it, it seems that what's happening is even though 1 audio track is assigned to each video track, FCP thinks that there should be 2 audio tracks? So when I move a video track to the next video channel, the audio is moving down two audio tracks instead of one...
    Ok, so atleast I do understand WHAT is happening, I just don't know why.
    -p

  • Audio and video clip lengths differ in encore timeline

    Hi
    I have been working to build a BD-R H.263 ac3 disk.  I used AME from within Premiere Pro to export the M4V and (at the same time) AC3, using the present defualt parameters-no tweaking of any setting.  The clips appear to play great on encore's monitor--everything in sync.And on the burned BD-R
    However, I am getting the black screen between clips in the timeline when played in the standalone BD player, or (when I had one clip to a timeline) in a playlist.  a previous poster made note of different length audio and video clips.  I zoomed on the timeline and lo and behold--the  the audio and video clips are different lengths.
    This is with the timeline fully expand--each division is a frame. Note that break between the two audio clips is offset from the break between the two video clips by two frames.  This offset is after several clips.  I could find no information on what the one frame crosshatching at the end of the leading clips means.  Can anyone explain this cross hatching?  What do I do about it?  the image below is after the first clip in the timeline:
    In this image, the offset is less than a full frame??????
    I tried using the trim tools to bring these together-but, the trim tool only lets it jump a full frame and then only to a GOP boundary, which doesn't help because the boundaries are obviously different fro the video and audio track.
    I want to emphasize that these assets were created from the Premiere CS4 timeline (which had no offset between audio and video) using the default H.263 and AC3 presets in AME and the same presets selected in Encore.
    The offsets do not appear to cause the actual audio and video to go out of sync when I play the burned disk. But, I get the 1-2 second wait between menus and chapters, or with items in a playlist.
    The audio offset suggests that the player may not know what to do when faced with a chapter point that is different on the audio and video tracks, although, I will note that encore snapped to the joints in the video track not the audio track.
    You can see from this listing that several of the clips audio and video lengths that differ by one frame.  By the end of the timeline, the cummulative offset is 3 seconds (48 minute timeline)
    Can anyone shed any light on this?  Thanks

    I don't think that I had the same problem that you do, but I thought I'd throw in my two cents just in case it might help. Encore would not build the output; it said something like the inpoint and the length did not match the endpoint. Actually, I think this happened in several different situations. In one case I simply adjusted the audio and video tracks to match endpoints. In the other case I went back to Premier and found that in some cases where I had added transitions it had shifted the endpoints of the audio and video tracks so they did not match. I removed the transitions. It didn't matter that much to me since I'm doing this for personal use. Is it possible those crosshatched lines you're seeing are transitions?
    I am using CS 3 and editing HD. I have had many problems with encore. I read in the form someplace that it had a hard time handling H.264 so I changed to MPEG-2 and that fixed one problem. In another case it couldn't find some files and I found some advice not to use HD or wide menus, so I switched to standard 4:3 menus and it worked.

  • Audio and Video not syncing

    I paid for a movie and I can't watch it on either iTunes or QuickTime and, yes, I tried most of those helps in that FAQ post. I say most because this is the most advanced comp money could buy so I do NOT need hardware OR software updates, seeing how I did the latter before finally giving in to ***** at you. Yes I am mad. I'm highly annoyed. I paid money I could ill afford to spend on a movie I really was looking forward to watching ("A Dog's Breakfast" starring David Hewlett) only to find that it won't play!
    Or rather, it plays, but the video skips and is out of sync with the audio. The help files in the "support" tap and the "Help" sections of both programs have been supremely unhelpful. Either refund me my money, or tell me how to fix this so I can watch this. Why people say Macs and Apple are better than Windows, I'll never know. At least with Windows you know you'll get screwed over.
    I realize this flame-ish piece has no made me popular and will likely be ignored, but I've earned it, dammit. Multiple times iTunes even CRASHED MY LAPTOP when I tried to make it play the movie. Blue screen of death!! Considering this laptop is less than six months old, that is not something I was expecting to see!
    So, please, either tell me how to get a refund or how to fix that damned program so it shows my movie.

    Some basic information is necessary.
    Captured it from what to what with what for what with what sequence settings in what program and using what cam.
    I think you understand that without some detail how can we guess at what the problem is.

  • Audio and video playback stuttering...sometimes

    I'm having issues with audio and video playback stuttering at times in several applications. It's the same kind of skipping or stuttering in each application, whether it's iTunes (version 10) or YouTube or Netflix (Safari). I can also hear it when I'm just adjusting the volume via the keyboard, the "clicks" stutter.
    I'm not running anything other than iTunes and Safari at once, the iMac has 2 gbs of RAM, it's running Snow Leopard. It also will work sometimes for a while. I just can't figure out why it will work sometimes and not others. Any ideas about what the cause may be? Quicktime X have anything to do with it?

    video playback stuttering at times in several applications.
    Quicktime wouldn't work either.
    Until you max out your ram, you are pretty much stuck between a rock and a hard place.  In the meantime, make sure you have the latest versions of
    Adobe Flash Player
    Flip4Mac
    VLC Media Player
    Perian
    Movist
    I'm noticing that in general it's running extremely slowly now, even with only the browser running.
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

  • I have a 2nd generation ATV and my audio and video is cutting out.

    The problem is intermittent.  Sometimes the picture continues and only the sound skips.  Sometimes both the audio and video cut out and return a second or so later.  This even happens on the menu screens where the video and/or sounds will "hiccup".  This happens when playing internet conent (like from iCloud or iTunes radio) or when playing content resident on my home computer via home sharing.  I've tried the setup at more than one house, on more than one Wifi network and hooked to more than one TV, but the problem still occurs.  Can anyone offer suggestions for a solution?

    Hello WanderNotLost,
    The article linked below details some useful information and troubleshooting steps that can help resolve issues with playback on your Apple TV.
    Apple TV (2nd and 3rd generation): Troubleshooting playback performance
    http://support.apple.com/kb/TS3623
    Cheers,
    Allen

  • Video glitchy pauses jumps and stutters

    Hi there
    I seem to be having prolems with video playback on my MBP.
    Often on You Tube for example after the video is fully downloaded on playback the video sporadically pauses or jumps forward or behaves generally glitchy. I do not believe it to be the internet connection. I have experienced some problems with downloaded files. I am fully updated as well.
    Does anyone have any suggestions please for things to look at or tests to run?
    Video is not my forte... :P
    Thanks very much
    A

    Fixed. There was 5 sec video clip that plays before the main video in the track. However, the 5 sec clip was video only, not audio, and was as a .mov as opposed to mpeg2. Anyways I encoded the 5sec clip in mpeg2/AAC and added it before the main clips and everything works. Still don't know WHY it happened and why it stuttered, any ideas? Don't think it was the lack of black at the start as i didn't add any.

  • HT1933 when i play my purchased movies in HD there the audio and video quality is poor

    I have purchased movies in HD but when i try to play them the audio skips and there is skipping in the video as well. However i also have a few movies in Sd and they do not have these problems. However even though the computer im using is not a MAC is an extremely nice Asus with a 4th gen I5 and supports HD video playback. Anyone know what to do  I tried to get help from apple and they scheduled me a phone call two weeks from now? some help right?!

    Can anybody suggest me how can I improve the quality of audio and video in JMF Player ? Below here I am providing the source code of the JMF Player I am using:My suggestion would be to use a supported OS with your JMF. JMF doesn't support "Ubuntu 8.04 and MAC OS 10.5", it only supports Redhat and Solaris (and Windows 9X or NT 4.0)

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

Maybe you are looking for