Audio Awful. Screenshots AND Audio Examples Included

(Webcam Notebook Ultra) My audio sounds awful and static-y when I record video w/audio:?I recorded a sample, here:http://home.comcast.net/~musiks/camsound.mp3(sorry for my voice, pleh)*If audio file doesn't open in IE, please try Firefox. My audio settings appear to be fine:
http://img.photobucket.com/albums/v6...amsettings.jpg
My drivers appear to be fine too:
http://img.photobucket.com/albums/v6...msettings2.jpg I have minimal (required) programs running in the background with plenty of resources. And, I use several other programs with audio, including Acoustica, MSN and Yahoo Messenger, and I always sound crystal clear with my default audio settings. I've tried using different audio compression settings within the webcam settings, to no avail. They all sound the same. HELP Thank you.
Message Edited by meus on 06-23-2007 02:30 AM

Similar Messages

Bought an album with an audio book included the album downloaded but the audio book diddent and I can't download help!

Bought an album with an audio book included the album downloaded but the audio book diddent and I can't download help!

You cannot redownload audiobooks at all.
If you want it on your macbook, tehn put it there.
You can transfer it from your iphone: File>Transfer Purchases.

[svn:osmf:] 13603: Use actual streaming audio file for streaming audio example.

Revision: 13603
Revision: 13603
Author:   [email protected]
Date:     2010-01-18 17:09:10 -0800 (Mon, 18 Jan 2010)
Log Message:
Use actual streaming audio file for streaming audio example.
Modified Paths:
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/AllExamples.as

It seems that you do not understand the problem at hand. I can listen on a m3u list using iTunes, VLC and other players, but I wish to listen on m3u lists as streaming music when I am on sites such as eMusic. For instance, I cannot listen on sample music at eMusic, but must download it first. Thus, it is not possible to listen on streaming music with Firefox. On the other hand, Opera and Safari handle m3u streaming music very well.
Can you listen streaming music or samples at eMusic using Firefox without downloading m3u-list on your local disk?

Can I export my Soundtrack Pro audio files, including the video?

I'm new to soundtrack pro 2, could I export my audio files including the video?
I tried, but all i get was audio...
thanks!

Export -> Master Mix - choose the File Type -> *Using Compressor*, this will give you options for re-encoding or preserving the video file.

I3 desktop screenshots and config sharing

i3 seems to be the new tiling WM on the block, and quite a solid one at that.
While I've just begun tinkering with it, I figured it might be good to have a thread i3 users can share their screenshots and possibly also configuration details, so that newer users can benefit from it.
After all, it's pretty damn hard to search the forum for 'i3'! Not so much a general discussion thread, there's one already around for that.
I've got nothing myself (yet), but if you have an i3 at least slightly different than out-of-the-box, please share
The below is shamelessly ripped from the daily screenshot thread.
* DO NOT post full resolution screenshots! You can use the "mogrify" command (pacman -S imagemagick) to make a thumbnail of your screenshot:
$ cp screenie.png thumb-screenie.png
$ mogrify -resize 20% thumb-screenie.png
Twenty percent of the original size is great for 1024x768 screenies. For bigger sizes (and especially for multi-monitor setups), we ask you to keep in mind not everyone uses broadband, and use an even smaller size (10% of a Full HD setup will still be 192x180, for example). You can then upload these images to your server and use the following code to show them on the forum:
[url=http://my.site.com/screenie.png][img]http://my.site.com/thumb-screenie.png[/img][/url]
* Several websites also offer free image hosting. Here are some that supports thumbnails:
Omploader | ImageShack | xs.to | iPICTURE | ImageHosting | Imagebam
Use the "Thumbnail for forums" link code that is supplied by the image hosting sites to post your thumbnail link.
Although, try to avoid imageshack. Its a pain in the you know where.
NOTE: full-size screenshots and resized images will be deleted by the moderators.
* If the screenshot has questionable material that might not be safe to view while at work or in a school setting, please post only a link and not a thumbnail, along with a mention of "Not Safe for Work". Posts that do not adhere to this are subject to deletion without notice at any time.
* Please try to include any links to your wallpaper or configs that you may have and/or the names of your icon theme, running apps, DE, etc. in the same post to reduce unnecessary clutter later.
Last edited by Ranguvar (2010-08-23 04:04:52)

The below is the config code. I've been meaning to put it on my git-hub, but never got around to it... I will eventually. The rxvt window is nothing special.. Just have it floating and then resized it to my liking... Or are you asking for my PS1 prompt?
## Font
# ISO 10646 = Unicode
font -misc-fixed-medium-*-*--12-*-*-*-*-*-*-*
## Window border style
# bn: border normal, with window title bar
# bp: border only, no window title bar
# bb: no border or window title bar
new_window bp
## Colours
#colourclass border bckgrnd text
client.focused #1793D0 #1793D0 #FFFFFF
client.focused_inactive #333333 #333333 #999999
client.unfocused #333333 #333333 #999999
client.urgent #FF0000 #8C5665 #FF0000
bar.focused #1793D0 #1793D0 #FFFFFF
bar.unfocused #333333 #333333 #999999
bar.urgent #FF0000 #000000 #FF0000
## Startup Programs
exec conky | dzen2 -bg black -fg white -fn -misc-fixed-medium-*-*--12-*-*-*-*-*-*-* -p -w 550 -h 16 -x 7
30 -y 784 -ta r &
## Program Shortcuts
# Mod1+Shift+Enter starts a new terminal
bind Mod1+Shift+36 exec urxvt
# Mod1+Shift+w starts a web browser (chromium)
bind Mod1+Shift+25 exec chromium
# Mod1+Shift+q kills the current client
bind Mod1+Shift+24 kill
## Tiling Layouts
# Toggle tiling/floating of the current window (Mod1+Shift+Space)
bind Mod1+Shift+65 t
# Use Mouse+Mod1 to drag floating windows
floating_modifier Mod1
# Fullscreen (Mod1+f)
bind Mod1+41 f
# Stacking (Mod1+h)
bind Mod1+43 s
# Tabbed (Mod1+w)
bind Mod1+25 T
# Default (Mod1+e)
bind Mod1+26 d
# Go into the tiling layer / floating layer, depending on whether
# the current window is tiling / floating (Mod1+t)
bind Mod1+28 focus ft
# Focus (Mod1+j/k/l/;)
bind Mod1+44 h
bind Mod1+45 j
bind Mod1+46 k
bind Mod1+47 l
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Left h
bindsym Mod1+Down j
bindsym Mod1+Up k
bindsym Mod1+Right l
# Focus Container (Mod3+j/k/l/;)
bind Mod3+44 wch
bind Mod3+45 wcj
bind Mod3+46 wck
bind Mod3+47 wcl
# (alternatively, you can use the cursor keys:)
bindsym Mod3+Left wch
bindsym Mod3+Down wcj
bindsym Mod3+Up wck
bindsym Mod3+Right wcl
# Snap (Mod1+Control+j/k/l/;)
bind Mod1+Control+44 sh
bind Mod1+Control+45 sj
bind Mod1+Control+46 sk
bind Mod1+Control+47 sl
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Control+Left sh
bindsym Mod1+Control+Down sj
bindsym Mod1+Control+Up sk
bindsym Mod1+Control+Right sl
# Move (Mod1+Shift+j/k/l/;)
bind Mod1+Shift+44 mh
bind Mod1+Shift+45 mj
bind Mod1+Shift+46 mk
bind Mod1+Shift+47 ml
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Shift+Left mh
bindsym Mod1+Shift+Down mj
bindsym Mod1+Shift+Up mk
bindsym Mod1+Shift+Right ml
# Move Container (Mod3+Shift+j/k/l/;)
bind Mod3+Shift+44 wcmh
bind Mod3+Shift+45 wcmj
bind Mod3+Shift+46 wcmk
bind Mod3+Shift+47 wcml
# Workspaces (Mod1+1/2/…)
bind Mod1+10 1
bind Mod1+11 2
bind Mod1+12 3
bind Mod1+13 4
bind Mod1+14 5
bind Mod1+15 6
bind Mod1+16 7
bind Mod1+17 8
bind Mod1+18 9
bind Mod1+19 10
# Workspace Names
workspace 1 Main
workspace 2 Web
workspace 3 Grid
workspace 4 Root
workspace 5 Misc
# Move to Workspaces
bind Mod1+Shift+10 m1
bind Mod1+Shift+11 m2
bind Mod1+Shift+12 m3
bind Mod1+Shift+13 m4
bind Mod1+Shift+14 m5
bind Mod1+Shift+15 m6
bind Mod1+Shift+16 m7
bind Mod1+Shift+17 m8
bind Mod1+Shift+18 m9
bind Mod1+Shift+19 m10
# Assign workspaces
assign "chromium" 2
# Mod1+v starts dmenu and launches the selected application
# for now, we don't have a launcher of our own.
bind Mod1+55 exec /usr/bin/dmenu_run
# Mod1+Shift+e exits i3, Mod1+Shift+r restarts i3
bind Mod1+Shift+26 exit
bind Mod1+Shift+27 restart
# The IPC interface allows programs like an external workspace bar
# (i3-wsbar) or i3-msg (can be used to "remote-control" i3) to work.
ipc-socket ~/.i3/ipc.sock

Need help with problem using sound and vibration examples. question repost

I am generating a wav file using the sound and vibration example vi "SVXMPL_Wav Recorder(DAQmx)" using a ni 7422 board. Then, using the example vi SVXMPL_Getting started with SVT(Simulated)" attempting to play back that file. the wav file will load and play back on the graphs fine but when I click the "Play Wav File" which sends the audio to the computers speaker, I get the error "Cannot recognise sound Format". It plays the shipped example files fine. I can also play the wav files I generate on a Windows audio player. Don't know a lot about the sound and vibration toolkit or wav file formats but need to get these two to work together. Using LV 8.5 and sound and vibration toolkit 4.0. This is a bit of a repost of the same question ask last week but not answered. Thanks

Did you see Coq Rouge's reply in your original thread? Which thread are you going to continue?

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Tabbed panels, Collapsible Panel, and Server Side Include

Hi,
I'm having a problem with the way a Server Side Include inside a Collapsible Panel displays.
Here is how this particular page is set up.
The page has spry tabbed panels.
>>A panel has one overall Collapsible panel (the main product tab)
>>>>Nested in that Collapsible panel are four other collapsible panels (Overview, Features, Screenshots, What's New).
>>>>>>In each of these four collapsible panels is a server side Include that features that category's content
E verything works fine as far as opening and closing is concerned. However, the problem is with the display. The content panel doesn't resize with the Include content, and therefore, the Include content extends outside the border of the content panel.
I'm thinking this is because it is Include content rather than normal content. Is that right?
Do I fix this by changing the overflow value of one the Tabbed Panel CSS styles? If so, which one should I change, and to what value?
Or if that's not how to fix it, can anyone tell me how?
Thanks a lot,
Mike

Hi, I'm using the latest version of Spry. I modified some CSS rules of the tabbed panels, but not the javascript file. I didn't do anything to the Collapsible Panel rules.
Since first posting this thread, I changed the overflow of the Tabbed Panels Content Group CSS rule to "scroll". That did produce a scroll, but I'd much rather have the panel expand. So, I changed it back the way it was.
Here's the page I'm working on. Click the Court Solutions tab to get to the problem panel.
http://www.ptssolutions.com/Test/public_safety_products_3.shtml
It has different results in IE and FireFox, but doesn't work correctly in either.
Thanks a lot for all your help,
Mike

Take screenshot and saves the image to a PNG file

Hello,
How can I take screenshot and save the image to a PNG file?
thanks,
Avivit.
Solved!
Go to Solution.

this is a quite reproducible problem. Some more clarification on my part might help:
I have a loop that contains, among other this, (1) a sub-VI that prints-screen and saves as a png and (2) a sub-VI that emails me the png file as an attachment. The 1st sub-VI simply uses the user32.dll to simulate a print-screen key stroke, calls clipbpard get image, and then formats and saves the image to a png file using the built-in VI write-to-png. This loop should update this same png file, because the path does not change. However, I've noticed that while the loop is running the png file does not update. It simply keeps sending the 1st image it took. The image updates if the VI stops and is run again. I assumed the problem was either with the clipboard not updating or the file not writing.
I think the png file remains open while the main VI (i.e. this loop) runs because I cannot delete the file while the VI is running, only once it stops or is quit. Windows gives me an error that the file is currently in use by labview. Therefore, I think the file is not updated because it remains open.
I've attached the print screen VI. Feel free to stick it in a loop and give it a try if you don't spot something obviously wrong. I did not include the main-VI that I actually use since it contains a lot of instrument I/O, which would prevent someone testing the VI.
Attachments:
PrintScreen.vi ‏18 KB

TestStand with perl and Tcl examples need newer dlls

I'm trying to run the TestStand with perl and tcl examples but they both point to older dlls. When I try to update by making changes and recompiling the main.cpp in VC++ 6.0, I get errors referencing cl.exe and oleauto.h, I'm not sure if I missed a step or what. See attached screenshot. TIA. Judy Jiru
Attachments:
scrnShotErrors.doc ‏110 KB

Hey Judy,
From my understanding oleauto.h and cl.exe are not National Instruments files. My suggestion would be to google the files - I found a bunch of hits for both the files. It may also be helpful to post on a discussion forum dedicated to VC++ 6.0. You may want to try the Microsoft newsgroups or I'm sure there are tons of other online.
I hope this helps! Once you compile the dll if you have problems calling it from TestStand please post back.
Regards,
Sarah Miracle
National Instruments

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

I bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4?

i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?

Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect) On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled new

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled the newest and one older version of itunes. still nothing. I tried to delete some files that is hidden as directed by apple. I have been trading emails with customer support but it has been no help at all. I am running Windows XP. Before i wiped my computer I ran itunes with no problem, on this computer, this week.

WOOOOOOOOOOOO!!!! JUST WANTED TO UPDATE Y'ALL THAT BY SOME STROKE OF HEAVENLY GLORY, ITUNES DECIDED TO WORK AGAIN!!!
WOOOOOOOOOOOOOO!!!
How did I do it you ask??
after all the stuff I updated you about, I tried one last time to install....still didn't work...so once again I wiped my system of everything itunes and apple related
well today I was trying to watch a video that required me to get the quicktime plug in, and it too me to a page that was a quicktime install + itunes 7.blah blah blah instead of the other way around
well, don't ask me why, but low and behold
IT WORKS!!!!
I HAVE MY ITUNES BACK!!! (JUMPS FOR JOY)
Just wanted to share my shear elation

Keyword and description not included in the Page Properties window

There is no Keyword and Description option in the Page Properties window (metadata). The only item available is HTML as <head>. How do I get Keyword and Description options included?

A master page has no keyword or description section, because it isn’t exported as HTML.

Audio Awful. Screenshots AND Audio Examples Included

Similar Messages

Maybe you are looking for