Audio between Logic and Max with Aggregate Device Tutorial

Here is a link to my tutorial that shows how to create an Aggregate device and use it to send audio from Max to Logic and vice versa.
click the "logic help files" link at the top of this page:
http://home.lagrange.edu/mturner/
Hope this is helpful,
Mitch
http://home.lagrange.edu/mturner

Edgar rothermich let me know that he has written a great deal on the Aggregate Device:
quote======
For more in-depth explanation of the Aggregate Device settings and Audio Devices in general download my Personal Manual "Logic 7.2 Audio Devices"
The free pdf file is available on my website at:
http://homepage.mac.com/edgarrothermich/Manuals.html
======
Check our his Personal Manual for greater detail.
Mitch

Similar Messages

Static with Aggregate Device

Hello,
I'm using multiple USB mics through an aggregate device. This has worked fine for me with Garageband 3 and Tiger. But this week I upgraded to Snow Leopard. Now, after varying amounts of time, I get static and a bit of a delay while recording. I installed Garageband '11, but the issue is still there.
So far, I've only noticed it while using the aggregate device in Garageband. If I change the mic input and then go back to the aggregate device, the problem goes away (at least for awhile).
Does anyone have any suggestions? Thanks.

None of the questions sound stupid at all...
In your case there can be a couple of common problems that are tied together. Sync and latency.
I don't have GB11. I believe however, there are no longer buffer setting preferences for audio devices in GB11. ???
Previous versions allowed for minimum delay to deal with latency. So one could change the buffer settings. Which would be something I would have recommended trying if that is possible.
The Snowball is class-compliant. (driverless). But they are USB2.0 which should help over the Rock Band mics if they are USB1.
And while Apple's Aggregate Devices seem to work ok with devices not designed for sync.
The Snowball's may not work as expected. They may work fine...I can't say. If you read Blue's FAQ on the Snowball they more or less say the same thing.
My experience with aggregate devices is using three interfaces connected digitally via AES/EBU with console software to configure master/slave. No experience with USB mics or devices without word clock sync.
What I can say is, if you want to use 3 mic's simultaneously. There are certainly viable options available to you that may serve you better.
And as an aside there are USB mixers that are multichannel as well as two-channel.
And it is possible that an audio interface or a USB mixer for that matter may also suffer from latency issues. All interfaces have latency. Just like in the real world when your ear is far enough away from the source of a sound.
But most have good enough drivers or Core Audio implementation as to be difficult to discern. Still something to consider when looking for an interface.
But you won't have sync issues running 3 mic's into an interface.

Difference between logical and virtual terms

Hello,
This is not purely oracle question; but in documentation so many times we find 2 terms:
A. Logical
B.Virtual.
So what is the principle difference between logical and virtual? As I know physical is that which I can see and touch; while logical/virtual is that is imaginary. We say tablespace is logical not virtual; while Java Virtual Machine; not Java Logical Machine. So I want to know; what is the principle difference; why two words for an imaginary thing. Before posting question; I searched in google as “Difference between virtual and logical” but I couldn’t found the answer.
Please quote your comments.
Thanks & Kind Regards
Girish Sharma

Girish,
I wont say that I am correcting you as this is like that half glass full/empty thing.May be what I see is half empty , you would see the same as half full.
Well now coming to the explanation.I am saying honestly , I got more confused after reading your definitions.What do you mean by saing that tablespace is not virtual.I see it as purely virtual.We don't say it as virtual tablespace or logical tablespace but it is actualy logical/virtual, having no existance but just the definition right?
How can you say that the size of virtual is larger than logcial?The size of tablespace is actualy the sum total of size of datafiles.So it actualy becomes very larger right?Much larger than JVM which is of few megs only.
The point 3 totally knocked me out.I have no idea what you said.
Ok I tell you this.Just remember the definition that Hans gave already.If you ask me than its the best definition that we can have. Just remember this and if some one asks you more further than give them your point 3 definition and tell them understand this ;-).Please don'tmind I am just kidding. Its just semantics.Don't get lost into it.You will find many people using both the terms interchangibly. So its ok.I shall stick with Hans's defintion,simple and concise.There are lot more other topics to dig upon in oracle.I can mail you lots of them.Spend time on those.Don't think that I am demotivating you.I understand you asked only because you have a doubt.But we got a good resolution of it and beyond that, its not of much use to dig it atleast not in the technial terms.
Cheers
Aman....
PS:Are you on oraclecommunity.net?

Diff between logical and physical file path

Hi ,
Could you please explain difference between logical and physical file path's and their importance in ABAP.
Thanks and regards,
shyla

Hi
The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
The advantage of using logical pathes within your applications is obivous:
If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
Save your changes.

Select just the values between min and max of an accumulated value over day

Hello Forum,
a value is accumulated over a day and over a period of time. Next day the value is reseted and starts again to be accumulated:
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
                   select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
                   select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
                   select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
                   select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
                   select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
                   select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
                   select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
                   select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
                   select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
                   select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
                   select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
select   ts, val
from     sampledata
order by ts asc;How should I change the select statement to skip all data sets before the first minimum and the duplicates after the maximum of a day in order to get such a result:
TS     VAL
09.09.12 06:12     23
09.09.12 07:12     29
09.09.12 08:12     30
09.09.12 09:12     45
09.09.12 10:12     60
09.09.12 11:12     75
09.09.12 12:21     95
09.09.12 13:21     120
09.09.12 14:21     142
10.09.12 06:12     14
10.09.12 07:12     34
10.09.12 08:12     58
10.09.12 09:12     70
10.09.12 10:12     120
10.09.12 11:12     142
10.09.12 12:21     153Thank you

This solution works perfectly when the accumulated value has its low and its high on the same day. But I found out :( , that there is also data, which has its low yesterday and its high today. For a better understandig of the case, there is a machine, wich is working over 3 Shifts with irregular start and end time. For example Shift1 cann start at 5:50 or at 7:15. The accumulated value of the worked time is accumuated for each shift extra. This solution works for the shift 1 (approximate between 06:00-14:00) and for the shift 2(approximate between 14:00-22:00), because there is the low and the high of the accumulated value on the same day. This solution does not work for the shif 3(approximate between 22:00-06:00), because the high of the accumulated value is or can be the next day.
So the thread title should be: "Select just the values between min and max of an accumulated value over the same day(today) or over two successive days (yesterday and today)
Sampledata for shift 1 or shift 2:
{code}
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 143 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 144 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 147 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 148 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
, got_analytics     AS
     SELECT ts, val
     ,     MIN (val) OVER ( PARTITION BY TRUNC (ts)
                    ORDER BY      ts DESC
                    )      AS min_val_after
     ,     CASE
          WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
                         ORDER BY     val
                         ,      ts
                         ) = 1
          THEN -1 -- Impossibly low val
          ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
                         ORDER BY      ts
          END           AS prev_val
     ,     MIN (val) OVER (PARTITION BY     TRUNC (ts))
                    AS low_val_today
     ,     NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
                         RANGE BETWEEN UNBOUNDED PRECEDING
                              AND     ts - TRUNC (ts) PRECEDING
          , -1
          )          AS last_val_yesterday
     FROM sampledata
SELECT     ts
,     val
FROM     got_analytics
WHERE     val          <= min_val_after
AND     val          > prev_val
AND     (      val     > low_val_today
     OR     val     != last_val_yesterday
ORDER BY ts
{code}
with the expected results:
{code}
1     09.09.2012 06:12:02     23
2     09.09.2012 07:12:03     29
3     09.09.2012 08:12:04     30
4     09.09.2012 09:12:11     45
5     09.09.2012 10:12:12     60
6     09.09.2012 11:12:13     75
7     09.09.2012 12:21:24     95
8     09.09.2012 13:21:26     120
9     09.09.2012 14:21:27     142
10     10.09.2012 06:12:02     143
11     10.09.2012 07:12:03     144
12     10.09.2012 08:12:04     145
13     10.09.2012 09:12:11     146
14     10.09.2012 10:12:12     147
15     10.09.2012 11:12:13     148
16     10.09.2012 12:21:24     153
{code}
And the sampledata for shift 3 is:
{code}
with sampledata as (select to_date('08.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union ALL
select to_date('08.09.2012 02:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('08.09.2012 05:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('08.09.2012 06:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 08:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 10:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 12:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 16:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 17:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 19:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 21:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 22:00:12', 'dd.mm.yyyy hh24:mi:ss') ts, 24 val from dual union all
select to_date('08.09.2012 22:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('08.09.2012 23:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 68 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 79 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 124 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 125 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 126 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union ALL
select to_date('09.09.2012 22:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 5 val from dual union ALL
select to_date('09.09.2012 22:51:33', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 50 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the unexpected results:
{code}
- ts val
1     08.09.2012 00:04:08     23
2     08.09.2012 22:12:13     40
3     08.09.2012 23:21:24     68
4     09.09.2012 22:21:33     5
5     09.09.2012 22:51:33     23
6     09.09.2012 23:21:33     40
7     10.09.2012 00:04:08     50
8     10.09.2012 01:03:08     60
9     10.09.2012 02:54:11     78
10     10.09.2012 03:04:08     142
11     10.09.2012 04:04:19     145
12     10.09.2012 05:04:20     146
{code}
The result should be:
{code}
- ts val
1     08.09.2012 00:04:08     23
2     08.09.2012 02:04:08     45
3     08.09.2012 05:03:08     78
4     08.09.2012 06:54:11     90
5     08.09.2012 22:00:12     24
6     08.09.2012 22:12:13     40
7     08.09.2012 23:21:24     68
8     09.09.2012 01:03:08     79
9     09.09.2012 02:54:11     124
10     09.09.2012 03:04:08     125
11     09.09.2012 04:04:19     126
12     09.09.2012 05:04:20     127
13     09.09.2012 22:21:33     5
14     09.09.2012 22:51:33     23
15     09.09.2012 23:21:33     40
16     10.09.2012 00:04:08     50
17     10.09.2012 01:03:08     60
18     10.09.2012 02:54:11     78
19     10.09.2012 03:04:08     142
20     10.09.2012 04:04:19     145
21     10.09.2012 05:04:20     146
{code}
Thank you for your help!

Problems on connecting FT audio between 4s and 6 twice in last 2 weeks

Problems on connecting FT audio between 4s and 6 twice in last 2 weeks.
Has anybody else encounted this problem, I have 4s and my son (in USA) has 6. He normally calls on way to work using bluetooth in his car and we chat on FT audio. Works well for since about October last year now seem not to. Before I get him to admit his car bluetooth or wifi is not working. I wanted to make sure there is not conflicts between the 2 operating systems!

Hey RGD VLB,
Thanks for the question. If I understand correctly, two iOS devices are not able to connect using FaceTime. You want to know if the OS could be the problem? I would recommend that you read this article, it may be able to help the issue.
This article covers different things that might be causing an issue.
If you can't make or receive FaceTime calls - Apple Support
Update both devices (your device and your friend's device) to the latest version of iOS.
Thanks for using Apple Support Communities.
Have a good one,
Mario

Difference between validation and susbstittution with tcodes

hi all can any body tell me about difference between validation and susbstittution with tcodes
regars
sravya

Hi,
Settting up the FI Validations
You can use additional validation to supplement the existing SAP logic to fit you into your businness needs.
For e.g. to allow postings from company code 0001 to business area AA only.
GGB0 - To maintain the validations
Validation - Enter a validation name e.g. VBUS
Applicaion Area - SAP module e.g. FI
Calling Point - Dependent upon the application area that is selected.
0001 - Document Header - validate enteries at document header, e.g BKPF table
0002 - Line Items - check line item entris within a document, e.g. BSEG table
0003 - Complete Document - check settings for the whole documents.
e.g. Validation step 001
Allowed company code '0001' to post to business area AA only. 'FI00' checks that line item is from FI.
If checks failed, the error message number 14 is displayed to stop the transaction.
Prerequisite
<BSEG> $BUKRS = '0001' AND
<BKPF> $GLVOR = 'FI00'
Check
<BSEG> $GSBER = 'AA'
Message
Type E No. 14 - Business Area not allowed for company 0001
Output fields 1 - BSEG - GSBER 2 - BSEG - BUKRS
3 - 4
OB28 - Define Validations for Posting
CC CallPnt Validation Description Activtn Level
0001 2 VBUS Business Area Validation 1
Activtn Level - 0 - Not Active 1 - Activated 2 - Activated for all except batch input
GGB4 - Manage the activation of all validations in the SAP system.
Validations, Substitutions, and Rules
Purpose
With the validations and substitutions software, you can validate and/or substitute data at the time of entry in the FI-SL System and other SAP Systems.
Implementation Considerations
You do not need to change the standard system to customize your validations and substitutions. For each installation, you can define exactly which validations and substitutions are necessary to ensure the integrity of your data.
Features
Validation
In the SAP System, almost all input values are validated by a program or against tables or master files. Since some types of validations cannot be standardized, you can use FI-SL's validations program to create validations for your system.
With validations, you can check values and combinations of values as they are being entered in the SAP environment. Validation rules are stored in the Rule Manager; as data is entered, the Integration Manager validates the data against the validation rules stored in the Rule Manager. Because data is validated before it is posted, only valid information enters the FI-SL System.
You define validation rules using Boolean logic. When you define a validation rule, the system checks the validation rule to ensure that it is syntactically correct.
You can also define the result of breaking the validation rule. For instance, you can specify that a message is issued but the user can continue processing. You can also force the user to correct the error before processing can continue.
For more information, see Validation or What Are Validations?. For more information on using validations, see Creating a Validation. For more information on Boolean Logic, see Introduction to Boolean Logic.
Substitution
Substitution rules are stored in the Rule Manager. When data is entered in the system, it is substituted by the Integration Manager. The Integration Manager calls the Rule Manager. Substitution occurs before the data is posted to the FI-SL databases.
You define substitution rules using Boolean logic. When you define a substitution rule, the system checks the substitution rule to ensure that it is syntactically correct.
For more information, see Substitution or What Are Substitutions?. For more information on using substitutions, see Creating a Substitution. For more information on Boolean Logic, see Introduction to Boolean Logic.
Rules
A rule is a Boolean expression that you can use as a condition, as a check, or in another rule. Rules enable you to refer to frequently used Boolean statements simply by specifying the rule name.
The FI-SL Integration Manager uses Boolean logic. When you use Boolean logic and syntax, you can:
Validate data
Substitute data
Select ledgers for posting
Transfer substitution data to a rollup ledger
Select report data
The Rule Manager stores the Boolean rules used to analyze data. The Integration Manager calls the Rule Manager and determines whether entered data should be used. If a Boolean statement is true, an action is taken; if a statement is false, no action is taken.
Boolean logic is used in the following FI-SL modules:
Validation
Substitution
Ledger selection
Report Writer
Rollups
To use Boolean Logic in one of the functions listed, you create statements that are used as formulas in the FI-SL System. For more information on using Boolean Logic, see Introduction to Boolean Logic or Boolean Logic Statements and Rules.

Is it possible to transfer music between iPhones and iPods with out using iTunes

Is it possible to transfer music between iPhones and iPods with out using iTunes

Nope. Both require iTunes on a computer to sync music from.
Unless the iPod is an iPod Touch and the music was bought from iTunes. In which case the Touch can simply go to the iTunes App, under Purchased and download the purchased songs for free.

Diff between logical and physical page ?

hi
what exactly difference between logical and physical pages?
where to set page size in report designer?
after seting paper size in report designer can i readjust in print dialogue box?
which is will be effected?
please explain

A logical page can contain several physical pages. Assume you want to create a format which is larger then your printer is able to print, then you can define a logical size, which contains n pages horizontally and m pages vertically.
To set the page size for your report have a look at the properties in the main section of your paper layout.
Regards
Rainer

Which smart tv (SAMSUNG U46F7000 or SONY BRAVIA W8 46'') has the best communication and functionality with apple devices?

Which SMARTTV (SAMSUNG U46F7000 or SONY BRAVIA W8 46'') has a better communication and functionality with apple devices (i pad- iphone).
Since the above manufacturers do not give me a straight answer and it is very important reason for me to make a choice please advise!

Sorry but I must correct about SONY!!!
The question was for Bravia series W9 and not W8.

ERROR-- 9 [Motor unable to stabilize between min and max limits] -- (2708) TEST FAILED

Re: ERROR -- 9 [Motor unable to stabilize between min and max limits] -- (2708) TEST FAILED
Please Somebody Tell me What Is The Issue.

It might be helpful if indicated exactly what you were doing when the error appeared.

What is the difference between Aggregation and Composition with example

plz help me to find the difference between Aggregation and Composition with example

Dear [email protected]:
Get back to work.
August 4, 2007 stalin_gnana asked:
I would like to know the description about 'is a' ,'has a' ..relationship in java.plz reply me to the above doubt if known
August 8:
Can any one encounter the clarification on how and where Observer class and Observable interface can be applied..plz answer me
August 10:
May you find a solution on why not have the concept of pointer,opterator overloading,virtual function and destructor in java
(Also August 10):
I would desire to apprehend the brief description about usage of Singletone class and where it can be applied.plz help me
Today:
I am having the doubt of 'is there any relation among Delegation and composition'.if have,plz answer to regarding question.
And then this thread today too.
sniff sniff
I smell a lazy attempt at getting others to do one's homework for him.

Whats the diff between PPOC and PPOC with Work flow?

Hi,
Can any one please tell me out the difference between Creating Organisational Structure under OM and creating under "Tools" with Work Flow ?
on Creation what would be changing factors between them?
And Explain me about Work flow and how it will be useful and also where and all it reflects in SAP HR?
Regards,
Vinoth Kumar.R

Hi
I need the procedural difference between PPOCE And PPOCE with work Flow.
Suppose if i need to create with PPOCE with work flow, is the Procedure would be the same or additionally I need to Activate some thing, It Might be very much Basic but i didnt work on othat so far.
If there is any notes or Links to learn about it, please forward as it is helpful.
Regards,
Vinoth Kumar.R

What is the difference between OCIEnvCreate and OCIEnvNlsCreate with utf16

because i find a oci sample code cdemouni.c,in this sample,use OCIEnvCreate with mode set OCI_UTF16,but OCIEnvNlsCreate also can set charset and ncharset OCI_UTF16ID,what is the difference between OCIEnvCreate and OCIEnvNlsCreate with UTF16?

First, OCIEnvNlsCreate() is recommended way of switching to UTF-16 mode.
Second, OCIEnvNlsCreate() uses new semantics for bind and define buffer lengths. With new semantics all lengths are in bytes. With old semantics,
UTF-16 string lengths are in codepoints, while other character sets use bytes.
You can get new length semantics with OCIEnvCreate() as well, by
adding OCI_NEW_LENGTH_SEMANTICS to the 'mode' flags.
-- Sergiusz

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Audio between Logic and Max with Aggregate Device Tutorial

Similar Messages

Maybe you are looking for