Audio bleeding to center channel from left main on X-fi Elite

Erg! I was testing to see if I would like the x-fi as a pre/pro for about a week now. I?have been using the digital out since?I got the card an?it was working great for some time.. Now, using the analog outs, the center channel doesn't work and left ch. bleeds into the center. In the THX setup, If I play noise to the center nothing happens but play the left main it comes out of the left and center. I have the x-fi feeding into the Ext-Decoder source of my denon so its basically just being used as an amp. X-fi is configured to internal decoders with 5.. All the features are off for debugging(crystalizer,3D, ect..).
I fired up the THX optimizer in the Cars dvd to test DD and DTS and same result(theatertek, windvd8). It does the test tone for each speaker and when it gets to the left main it also comes out of the center. When it sends test tone to center speaker nothing plays. Its like my cables were crossed (somehow )
I switched the settings over to 4. in x-fi and it properly sends center ch. to left and right mains.
Am I missing a step?
I made sure control panel was synchronized to X-fi just in case. I have tried uninstalling and re-installing drivers and s/w (XP).
Maybe my card went bad ? its only been 5 monthsAny ideas what to look into?I have been searching for a long time now and couldn't find anything on creative or avs. Thanks for the help!

?Update: Well, i figured out it is wired correctly because if I go into "gaming mode" it works properly. I have the problem when in entertainment mode or audio creation mode. I tried to replicate all the settings in the gaming mode into entertainment mode but still no go.. Update 2: I uninstalled all x-fi sofware and took out anything in the registry. After reinstalling, it worked like normal. I then started fiddling and somewhere in my "fiddling" process I noticed?the sud?wasn't working anymore. What was happening before is now mirrored back to the Suroundleft/sub. So now the subwoofer is playing whatever the SL is playing and the sub channel plays nowhere. I went into Game mode and it worked untill I went into the?bass management. hmmm..
Message Edited by jdamore on 02-27-200705:36 PM

Similar Messages

How to access audio instruments as midi channels from midi keyboard?

Hi!
This is my first post here.
I use mostly Logic Pro 7 as a sound module with my keyboard. I have a song file in Logic that I made some time ago, where I've linked every audio instrument to a corresponding audio channel (same midi channel). All channels are in record mode, and thus every audio instrument is assigned a midi channel - and I can play different audio instruments by changing the midi channel on my midi keyboard.
Now, I want to create more tracks, so I can have more instruments to choose between. That doesn't work.. I try to make a new logic file and do the same thing with more channels, but I can't remeber how I made this work in the first place. I've been trying for hours and hours, and I'm going nuts here.
I would extremely grateful if anyone could tell me how this is done.
(No rewire/extra software is necessary.)
Thanks for reading.

Welcome!
It's fairly straightforward. On each audio instrument, assign a MIDI channel in the parameter box - so eg Audio Instrument 1 is set to MIDI channel 1, Audio Instrument 2 is set to channel 2 etc.
The key part is in your song settings "File -> Song Settings -> Recording" to make sure "Auto demix by even channel" is ticked.
Now, shift-click on the record buttons for all your audio instruments, and when you send on MIDI channel 1, you'll play the first one, switching to channel 2 you'll play the second one, and so on.
The max you can do is 16 channels at once, afaik, as the sequencer input doesn't retain port info (which is a bit of a shortcoming in my book, but there you go...)

Send stereo audio to center channel

I know I've done this before but can't remember how. I want to send the L/R audio to the center channel as a lower volume mono track. I thought all I did before was change 2/0 to 3/0 but it's now not working.

?Update: Well, i figured out it is wired correctly because if I go into "gaming mode" it works properly. I have the problem when in entertainment mode or audio creation mode. I tried to replicate all the settings in the gaming mode into entertainment mode but still no go.. Update 2: I uninstalled all x-fi sofware and took out anything in the registry. After reinstalling, it worked like normal. I then started fiddling and somewhere in my "fiddling" process I noticed?the sud?wasn't working anymore. What was happening before is now mirrored back to the Suroundleft/sub. So now the subwoofer is playing whatever the SL is playing and the sub channel plays nowhere. I went into Game mode and it worked untill I went into the?bass management. hmmm..
Message Edited by jdamore on 02-27-200705:36 PM

5.1 X-gamer and center channel of 5.1 speak

Hello,
first post may as well be a good one..
Ive read the FAQ and tried the options listed. im working with a week old install so not much on the dri've other than world of warcraft and MS office. Im running windoze XP pro on a AMD Sempron 2500+(.75ghz) with gig of ram and a nvidia GEforce6800GT video card. I have had this sound card a while, like 5 or 6 years. Ive connected a brand new Logitech X-5530 sound system to my X-gamer 5. sound card. everything sounds awesome excpet the center channel. Ive connected the center channel to the main output jack and got sound, so i know the speaker is functioning. the sub and center channel share a line on the X-530 speaker wires and the sub is working. however i get no sound out of the center channel. I tested this with the Creative Audio HQ panel set on 5. speakers. all other channels i hear the "front right, front left" etc... but center channel is totally silent.
any ideas?

Hmm, first go through windows control panel - sound and Audio Devices. Ensure you card is selected in all setup menus.
If "use only default devices is ticked, untick it.
Try S/PDIF and see if that works.
D/L this program - ?rightmark-3dsound-2.2 and run it just to tes things.

Changing track from left to right speaker

I recently acquired a Macbook with Garageband '09. I made a recording with two mics, one recording a guitar, and one recording a drum kit (They were both recorded at once on the same track). Since I had set the input to stereo, the guitar (mic 1) played through the left speaker, and the drums (mic 2) played through the right speaker. I would like to have mono sound, but I still want to use two mics to provide better clarity and prevent spill.
Is there a way to keep the track I have (guitar=left/drums=right) and perhaps duplicate it and switch channels from left to right creating a mono sound? Basically one track would be guitar=left/drums=right and the other would be guitar=right/drums=left. Or is there perhaps a way to switch a stereo recording to mono once recorded?

I would like to make a track mono, but do not see where in the "pane" I can do that. The only option I have found is to change the input from stereo to mono. Since I have audio that is already recorded, and is unfortunately only on the left track, is there a way to get the mix down to be mono so that I'm getting the audio in both speakers?

Center channel audio bleeding into left channel

When working on the audio mix for a project I discovered that dialogue would bleed into the left channel for some reason although the panner is set to center exclusive for that track. Can anyone else replicate this problem or can an expert chime in to confirm if this is a bug? It's definately bugging me
EDIT I am on 2014.2

with Premiere Pro CC 2014.2, build 8.2.0, I do not have any success with the center channel isolated with the stereo or mono audio
how about a work around with using an adaptive track, then channel output map the stereo input 1 and 2 both to output 3 (center channel)

HT204291 I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on

I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.

I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

Accessing center channel in Sony AVCHD video AC3 audio (5.1 surround)

I have tons of video shot on Sony HDR-CX7 and HDR-CX12 camcorders (AVCHD) in 5.1 stereo. iMovie '09 and Final Cut Express import the audio as two channel stereo, which is normally fine for a consumer app.
I use a Sony wireless microphone to record interviews, and I normally set the camera to record only the monophonic microphone audio. But, there is also a setting to let the camera record 5.1 stereo from it's built-in microphone, and use the wireless mic as the center channel audio.
I have footage recorded this way, and I find that when I play it back in stereo, I get a slight delay/echo caused by the wireless mic recording voices, and the camera recording voices (slightly offset). I cannot use the audio this way.
I want to extract the center channel audio from the AVCHD .mts files. I can then line that audio up with the video in Final Cut Express (or even overlay it in iMovie '09).
Does anyone know of a free utility that can strip out audio from AVCHD files?
It looked like Handbrake might work, but it errors out when it tries to convert more than two channel audio.
I believe the AVCHD audio is AC3 format, so if I can strip that out, Quicktime is able to mute the other surround channels.
Any tips?

Here is my current status, and a work-around method to accomplish this.
First, using "ffmpeg" it is possible to extract just the .AC3 audio stream from a .MTS AVCHD camcorder file. I have tried to do this with the Mac OS X GUI version, ffmpegX, but it errors out. It looks like it is sending the wrong parameter to ffmpeg internally (or perhaps it is using a different ffmpeg command I have on my machine). Anyway, the command looks like this:
ffmpeg -i 00000.MTS -acodec copy audio.ac3
That will extract just the audio stream from within the MTS file (which is an AC3 file). By default, you cannot play .AC3 files in QuickTime. It turns out, I had "Perian" installed, which is an extension for QuickTime that allows it to play a bunch of other files. One of the settings was a Stereo mode, which was causing anything I tried to play mix down to stereo. Aha! So, I could toggle that off and actually get to the audio track I wanted.
BUT, since native Mac OS X does not read .ac3, my workaround is to again use ffmpeg to convert the .ac3 file to a .aac:
ffmpeg -i audio.ac3 -acodec ac3 -ab 512k audio.aac
Since the source AC3 file was 448kb/s, I just manually chose 512k as the conversion rate, so it shouldn't lose too much quality. That value can be changed to decrease file size.
The end result, "audio.aac", is now a 6 channel 5.1 audio file. You can open it in QuickTime, and go to Window->Show Movie Properties then select the "Sound Track" track, and the "Audio Settings" tab of that track, and you will see tracks 1-6 (Left, Center, Right, etc.). You can toggle the tracks off to get to the one you want (in my case, just Center).
From there you could export this out to a file with just the track you selected, or drag the .aac file in to Final Cut Express.
If you drag in to Final Cut Express, you will see it takes up five audio tracks. I drug this under the original imported video track, and was able to mute the ones I did not need. I also found I could unlock the audio from the video, and then delete the ones I didn't want, just to clean up the edit window a bit.
The end result is now I can import the AVCHD file in to Final Cut Express, and bring in this converted AAC under the video to access just the center audio I wanted.
When I have time to streamline this process a bit more, I will update this topic.

Mono audio playing from left speaker only

For websites who have mono recorded (single channel) podcasts, audio in firefox will only play from left speaker instead of picking center channel.
If audio is downloaded and played on seprate dedicated player it defaults to center or if same site is played in IE also defaults to center.
Stereo recorded podcasts have no issue.

I assume that not a Flash player is used in this case, but that this is an issue with the (built-in) HTML5 media player and the audio tag is used.
Is that correct?
The Flash player should show the Flash context menu if you right-click the player area.

Feature Request: Modify Audio Channels from the Timeline in Premiere CC.1

Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Does anyone else feel the same? If not, what is your workflow?
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
I've submitted a feature request, with a link back to this discussion, so please pipe in—especially if you want this feature.

Maybe its your specific workflow, asset mangement and use of a 3rd party application that runs you into an issue.
Take Pluraleyes out of the equation, I would imagine my workflow is the same as most everyone else. Find footage in the Media Browser. Import it. Create a Sequence and start editing. Use the Source Monitor to set Ins and Outs and then Insert the clip on the timeline.
At this point, if the audio needs to be modified, it cannot be done on the Timeline. The workaround, of course, is to Find Clip in Project; Modify Audio in the Project panel; then do a Matchframe to replace the audio clip. This works, but requires many steps per clip. Also, Matchframe in Premiere Pro CC is not reliable.
Introducing a new Modify Audio (from Timeline) feature as seen in the fantasy screenshot above would solve it.
I dont use Pluraleyse ...which I understand to be a synching aid...so I dont know the workflow it imposes on one .
Returning to Pluraleyes workflow, this issue is compounded by the need to Modify almost ALL audio. Every stereo track is separated and placed on two MONO tracks taking up precious real estate. This is not something Pluraleyes imposes. It is due to the way Premiere imports XML timelines. This would apply to sequences imported from Final Cut as well.
In this case it would be ideal to select both the LEFT and RIGHT mono tracks and choose "Modify > Audio Channels > Merge L/R Mono to a Single Stereo track." Ideal? No. I guess Ideal would be if Premiere would interpret XML files properly in the first place.
What actually is the issue with Premieres synch and merge workflow in your case?
Audio Sync in Premiere Pro doesn't work. Period.

Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Audio Center Channel gone

Hi there!
I have been trying to work this problem out for some time without success, so I hope somebody here is able to help me.
I recently finished a project in CS 5.0.3 containing a lot of clips coming from DVDs which contain 5.1 sound which Premiere neatly converted to stereo tracks. Today I opened the project again to make some final changes only to find that the audio was not working as it did before. Suddenly the downmix Premiere does is missing the center channel. If I import a new clip an manually deselect all of the other channels only then I can hear the center. I tried creating a new project but it behaves just the same: the source monitor seems to playback the sound without the center, but if I drag the clip to a stereo track it the downmix seems correct.
This is all very odd, considering that nothing was changed. Maybe some external codec that has to do with how Premiere downmixes the audio? Hope somebody can help me out with this.
Thanks, dave

JSS1138 wrote:
Dragging the clips which contained a 5.1 mix to a stereo track
To the best of my knowledge, that is not possible. A clip will only go on a track of the same type.
These are mpeg2 files containing an ac3 6-channel mix. Previously Premiere seemed to handle them as stereo tracks (the information on these tracks that I imported a month ago still reads "Compressed - Stereo", but Modify->Audio channels reveals there are 6 channels only two of them are selected L & R). If I now reimport any of these tracks Premiere suddenly says "Compressed - 3 Stereo". I suppose that this difference in handling the ac3-audio has resulted in the missing tracks.
Could anybody tell me how their version of Premiere handles files with ac3 audio?
Does Premiere rely on any extrenal codec to decode ac3 audio? It might have been that this codec was updated on my machine and now produces a different result?
Thanks again, dave

How can I delete an item from the main left column of iTunes?

I'd like to delete an item from the main left hand column in iTunes (the column containing the main headings LIBRARY, STORE, SHARED, PLAYLISTS etc etc). Under the first heading 'LIBRARY' appear the items Library, Music, Movies, iTunes U, Books, Apps and Ringtones. I'd like to remove the item "Library" from that list - it appears immediately after the heading "LIBRARY" and serves no purpose whatsoever. (Neither does it appear to cause any harm, I must say, just a nuisance.) This item does not appear in any of the iTunes viewing options or controls lists. Neither does it appear in iTunes in the other accounts on my Mac and I have yet to see it any other iTunes on any other Mac.
I've upgraded since about iTunes 8 assuming the problem would eventually disappear through the upgrades but it hasn’t, even through all the providedupgrade increments available for iTunes.
I'm assuming it's from something I've installed in my main user account at some stage and it entered this item in the iTunes app. But I can't see how to remove it. The only things I can remember installing are "iTunes Batch Column Renamer" and "Join Together", both if which are just Scripts and which I use fairly regularly, but I don't recall either of them installing that particular item.
Is there any folder I can navigate to to edit the list of items in that main left hand column of iTunes?
Many thanks in advance for any help offered.

on second thought, that you have an item "library" is indeed odd - there shouldn't be.
suggest you try removing iTunes completely (click here and follow the instructions), then reinstall it using the standalone installer from here: http://www.apple.com/itunes/download/.
note this will not do anything to your media files, playlists, ratings, etc.
btw, you didn't install any 3rd party tools like this script:
Change Hidden iTunes Preferences v2.4
This application will allow you to invoke hidden iTunes preferences:
Show "Library" playlist
Changing view setting is global
Allow half-stars in ratings
Hide "Ping" buttons
Show/hide arrow links -- to either search the iTunes Store or search your library
Load complete iTunes Store preview before playing
Create playlists for purchased song collections
Play songs while importing or converting
Create file names with track number
Maintain grid view for Search results
Option-click zoom button for Mini Player&
Show buttons horizontally
Message was edited by: Jolly Giant

Audio only comes from left

I was recently trying to play my powerbook into my stereo with a direct RCA connection and I noticed that the audio was only coming out of the left speaker of the stereo. At first I thought it was the stereo but then I hooked my ipod up to the stereo and it worked fine. I hooked up to the stereo to my airport express and it produced audio through both speakers. The audio also only comes out on the left through the computer. Any ideas on what to do? Also, it is not just from iTunes the audio only comes out on the left with quicktime too.

I was just looking around - seems like there are lots of people with this problem. I was originally looking to see if anyone had a problem with their PowerBook's audio output jack - mine won't let the headphones plug all the way in. But I'd also noticed a frequent balance problem.
The consensus seems to be that if you adjust your sound during a period of high CPU-usage it'll lose proper balance. I ran Audio MIDI Setup (Applications->Utilities) and experimented with adjusting the volume. Lo and behold! When I would hit the volume keys on my keyboard, the sliders wouldn't move quite the same! Quite annoying. Seems that over time the difference gets greater.
Kevin Konikowski pointed out in this thread (http://discussions.info.apple.com/webx?128@@.68b6e310) that an application called balanced exists with the sole purpose of keeping your balance at 50%. You can find it here:
http://www.versiontracker.com/dyn/moreinfo/macosx/26786
Frustrating, but much more manageable knowing what's going on!
Jonathan

Audio bleeding to center channel from left main on X-fi Elite

Similar Messages

Maybe you are looking for