Audio book stop and start

How can I continue listening to the audio book where I stopped earlier?
Befuddled with nano.
Rudy

Problem solved. Thank you for your help.
Rudy

Similar Messages

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • While playing videos on itunes, audio and video will stop and start. It just started doing this recently and it does it with all my itunes videos..help!!

    While playing videos on itunes, the audio and video will stop and start several times during playback. This just started recently and it does it on all my videos. Help!!

    Try to download the application VLC.
    It is a media player that should be able to play any audio or video file you may have. If your videos play flawlessly using that application, then the issue is with iTunes and Quicktime, as they are both essentially similar software types when it comes to playing media.
    In that case you may need to install a plug-in file called Perian, in order for the videos to play correctly within iTunes or at least Quicktime...

  • Audio stopping and starting and video freezes

    Hello, I was playing back a clip in imovie when the audio stopped and started, and the video freezed.
    Please help.
    -filmmayker

    Never mind - I finally got it to stop. Thanks!

  • How come when I stop and start an audio clip before its done...

    How come when I stop and start an audio clip when before its done, that when I play it it only plays part of the file?

    I'm not sure if I got you right, but do you mean that it's like pausing...
    I have never played an audio clip with java, but if this is the case, maybe you have to rewind the clip.
    /J Lindroos

  • Burned DVD issues in DVD player not reading or music issues stop and start

    I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
    Message was edited by: me01

    Hi me01
    Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Task created to stop and start Health service not working.

    We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
    as well as when i check in Services.msc it is still stopped. Below are the screen shots .
    Task created to STOP the health service which is running.
    Screen shot of service start task creation which is NOT working
    The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
    We also tried the recycle health service and chche which is also failing.
    Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
    We are facing the issue only with Healthservice.

    Hi All,
    Thank you for all your answers.
    @ dktoa -
    You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
    @Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that  group in that site and then  enabled the override on Restart
    Health Service for a specific group and pointed towards that group then it worked.
    Thanks All.

  • Video playback stops and starts

    I've never had this problem before but since I wiped my 5th Gen (late 2006) iPod Video and put new content on it the video playback keeps freezing for a second and then continuing. Most of the time the audio keeps going but sometimes they both stop and start again. It's very annoying. I don't see anyone else in this forum complaining about this. Am I the only one?
    Anybody have any suggestions on how to fix this?
    -LT

    What codec does your source footage use?
    What codec is applied in Sequence > Settings?
    Where are the source footage and render files located on your computer?
    Version of FCS, Mac OS X and QuickTime?

  • Why does iMovie project jerk and stop and start in preview?

    I have been making iMovies with iMovieHD for years using photos with the Ken Burns effect.
    Recently after a movie project gets more than a few minutes long with typical audio and transitions, I no longer can preview it without it jerking and stopping and starting.
    Obviously this does not allow me to see what I am doing, how the music matches or doesn't match my photos.
    I have tried emptying the iMovie trash and emptying my finder trash, no change.
    I have made sure there is plenty of hard disk space on my internal drive, where iMovie and the movie file is located.
    Any ideas?

    Hi
    a. Emptying the trash - something I alway avoid - no matter why.
    b. Plenty of free space on internal (start-up) hard disk ? > 25Gb after
    project is captured and edited ?
    c. Deleted iMovie pref file ?
    d. Known trouble maker: Lot's of audio clips. eg > 50 gives a stuttering result
    Mix down audio to one audio clip.
    e. What kind of original material. 12-bit audio or recording in LP-mode (90min
    on a 60min tape) GIVES problems + audio sync troubles.
    f. .mpg4, .avi, .wmv and other ailient file formats also is problematic.
    g. movie stored on an external USB/USB2 hard disk - often troublemaker.
    I use FireWire AND ONLY: Mac OS Extended formatted -
    UNIX/DOS/FAT32/Mac OS Exchande DOESN'T WORK
    Yours Bengt W

  • Recording stops and starts up again

    So i was recording a gig and it would stop and start up again throughout
    the event.  I was not running anything else on my laptop but onlocation.  My virus protection was turned
    off since I was in a non-wifi location.
    Here are my specs for my laptop.
    HP-HDX18
    Intel(R) Core(TM) 2 Duo CPU
    T9900 @ 3.06 GHz-3.07GHz
    Memory 6GB
    64 Bit Windows Vista - Waiting for my Windows 7 upgrade to come in.
    500 GB HD
    Rating of 5.4

    When I first tried it out...  it was a band new laptop.  Nothing was running
    on it except on location.  I turned off the screen saver and virus
    protection.  There was no pattern of when it would glitch it would just do
    it.  Some a few seconds apart to a few minutes apart.  Yes my disk very
    defragmented which I always do after installing and uninstalling programs.
    So I know everything was up to par at that time.  I also have premiere pro
    cs4 on it and it runs fine with no hiccups.  Just on location does this.  I
    kind of notice at one time it seemed like it would hiccup when the audio
    level dropped.  But then again it would do it when someone was on the mic
    talking too.  So I'm clueless... and I believe its going to be very hard to
    diagnose.

  • Every video or podcast stops and starts every second

    Any help would be appreiciated, using Chrome, Windows XP Pro with SP3, Pentium 4 2.4GHz, with 2GB Ram, with Nvidia Gforce 5200 video card! Too old a system??

    hi, all three are pretty much the same, and its not a buffering issue. I hav Verizon Fios and had a WUGNET speed test show download speed being 11.3 Mbps and upload of 1.24. It was possible the Html was slightly better but not by much.
    Jim
    Date: Thu, 25 Oct 2012 15:22:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: Every video or podcast stops and starts every second
        Re: Every video or podcast stops and starts every second
        created by Chris Campbell in Using Flash Player - View the full discussion
    That should be fine for system specs.  My first guess would be network bandwidth issues.  Does it seem like the video/audio buffers fast enough or does the buffer continue to run out when the item is played? Try these two links out, do either of them play better? HTML5 videoNon-HTML5 video Thanks,Chris
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4801142#4801142
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4801142#4801142
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4801142#4801142. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Using Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Order of stop and start of reporting services

    Hi All,
    I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
    Thanks
    Hypuser

    The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Music skips and stops and starts

    Hello, we have just got a nano to replace a 3rd gen iPod.
    I have around 50 gigs of music on a lacie USB drive, and the music plays flawlessly from here in iTunes.
    However once imported into the nano, there is distortion, jumps and clicks in the music and sometimes the song will just stop and start from the beginning.
    Any ideas?

    Gary,
    You chould check out this thread we have going.
    http://discussions.apple.com/thread.jspa?threadID=356911&tstart=0
    Toshiba Satellite P25-609   Windows XP Pro   Media Center Edition iPod Nano 2G (as black as my cold, dead heart)

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    /Library/LaunchDaemons/local.postfix.stop.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.stop</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>stop</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.start</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>start</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

  • MacBook Pro hard disk stops and starts

    Why does the hard disk on MacBook Pro stop and start every 15 minutes or so? All operations suddenly stop for five to ten seconds during the spin down. I don't recall this happening in OS 10.5. The preference "Put the hard disk to sleep when possible" is NOT ticked, therefore the drive should never spin down.
    Any ideas?

    Try resetting your SMC.   Resetting the System Management Controller  >>
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Maybe you are looking for