Audio book stopped burning before end of book completed

I downloaded an audio-book from Audible to iTunes and successfully started to burn discs, however the entire book was not copied and the iTunes burner did not ask for additional discs to be inserted. (six hour book only four hours copied) I don't want to start over is there a way to burn additional discs from where iTunes left off?

Sadly, no change after updating v10.8.5(combo). A normal boot with an attempt to "buy book" from iPhoto, gets almost to the end of the upload and then gives me the following error:
In Safe boot, I get to the beginning of the Assembly process and iPhoto crashes. Here is a portion of the problem details:
I compiled my book on Thursday evening, thinking that would be the painstaking part. Purchasing it has become too much of a time consuming adventure! I did call Apple Technical Support last evening and the service agent suggested that I check the Apple Support Community discussions, so thank you for taking a greater interest in my problem.
One other thing I found regarding problems submitting photobook orders is at the bottom of http://support.apple.com/kb/TS2516. An excerpt from this webpage is below, but I can't find the "NetServices" entry in my Keychain Access window to try this fix. Do you think this is a piece to my puzzle or simply old info as it was last modified on May 24, 2012?
Again, I was able to order a photocard (cancelled the order within 90 minute window) as a test, so I don't believe I have an account problem.
excerpt:
If you are using iPhoto '08 or iPhoto '09 and are unable to submit your order after following the steps above, please follow these steps to reset your Keychain:
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
If you are unsuccessful with submitting your order, please contact Apple Technical Support.

Similar Messages

  • I CAN'T DOWNLOAD THE FILMS RENTED. THE DOWNLOAD IS STOPPED FAR BEFORE THE DOWNLOAD IS COMPLETED AND DISAPPEAR THE POSSIBILITY TO DOWNLOAD AGAIN

    I CAN'T DOWNLOAD THE FILMS RENTED. THE DOWNLOAD IS STOPPED FAR BEFORE THE DOWNLOAD IS COMPLETED AND DISAPPEAR THE POSSIBILITY TO DOWNLOAD AGAIN

    Hello guys. It seems i'm having the same issue here, but when I open Iphoto it says that I'm not running the latest version. But when I open App Store it doesnt show any updates.
    Does anyone knows why can't I update to Iphoto 9.5? I own the ILife 11 dvd.
    Thanks

  • ITunes began downloading a file I didn't order and don't want. I stopped it before the download was complete. What do I do now?

    iTunes began downloading a file I didn't order and don't want. I stopped it before the download was complete. What do I do now?

    Download past purchases - Apple Support
    I wold try to connect in a different WiFi setting

  • TS3694 I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.

    How do I turn off I pod touch?   The restore screen is stuck

    Thanks for the assistance.  I was able to restore my I pod after letting the battery run down.  I then synced the I pod to my new computer.  Most of the songs moved from the cloud to the actual I pod drive.  But, many of them did not.  I tried downloading them from the cloud on my I pod, but this didn’t work.  Will I be able to restore the missing songs?  Thanks, Cleveland.
    Sent from Windows Mail
    From: Apple Support Communities Updates
    Sent: Sunday, November 9, 2014 4:52 PM
    To: shircleve
    You received a reply
    lllaass has replied to your question. You can view the full discussion in Apple Support Communities.
    I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Correct Answer  Helpful Answer 
    Use the buttons above to tell lllaass and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to lllaass, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • Playback stops just before end of playlist in iTunes 7

    An annoying problem that started with iTunes 7:
    Playback will stop a few seconds before the end of the last track of a playlist (and so the play count for that track is not incremented). The play/pause button does not toggle. If I press pause then play again, it finishes the last few (silent) seconds of the track (and increments the playcount).
    Is anyone else having this problem? Anyone know how to fix it?
    I have crossfade and gapless playback both turned off.
    PB 15in 1.25GHz   Mac OS X (10.4.8)  

    Just experienced the same problem, while playing a single song searched on iTunes (iTunes 7.01).
    When the timer reaches 2/3 seconds to the end, it stops. If I try to start the playback again, or I try to play another song, sometimes iTunes freezes.
    Crossfade turned off too.

  • Can't get ios5 downloaded in itunes stops just before end.

    hi, ive tried 3 times now. it gets to about 5 mb left, then gets fatal error and goes back to zero kb. so i have used like 2,4 gb now and still it does not want to complete the downloand in itunes.
    any advise 4 me please?

    Cal Burke wrote:
    This is a programming error, obviously - to me. Is someone addressing that issue? Anybody?
    What behaviour exactly do you consider to be a programming error? If repeatable and clearly not an intended design choice then a bug report might be in order. If it works as designed but you think it should work differently then feedback would be the way to go. Either way nobody is likely to address an issue that isn't brought to their attention.
    I am unable to put the songs of a playlist I created in the order I want. iTunes 11.1.3 has been on my machine since September of last year and this issue began today. I'd lke to believe it's the result of something I have done, but the world is full of things I would like to believe that are not.
    "View Options" was set to 'manual' and songs would snap back when I attempted to move them, so - as that was the only preference I could find that applied - I changed it to "Artist Name" and back to manual. Now they don't budge when I attempt to move them.
    Ah, when viewing a playlist use the List view and select the heading of the left-most column of numbers. This is the Play Order column. You can drag tracks up and down the list. If you sort on some other column and would like to use this as an initial order which you can then modify, right-click on the playlist name and click Copy to Play Order then select the play order column. Note the triangle should be pointing upwards otherwise the list will play in reverse on your device.
    tt2
    Message was edited by: turingtest2

  • AME stops encoding before end of video

    Hello all. I have a video that is about 30 mins and AME is only encoding the first  29 seconds. Any ideas or directions or former posts regarding this? Thank you in  advance.

    You're having the same unanswered problem that we're having here. Do you use Quicktime Reference files to encode from?
    avidgy

  • Trying to burn an audio book....need some help...

    Ok,
    I am burning some auidobooks for a friend. Rather than the audio book being broken down into tracks it is one track. The first book went fine though I ran out of CD's. The first book was a mix of brands and contained CDR and CDRW.
    I purchased the next set of blank CDRs and finished the first book fine no problem. Then I started to burn the next book. As before, it tells me that I need mutiple CDs because the track is obviously too long to put on one CD. So I start the burning process. Everything goes fine. No errors at all. I put the CDs in to check them. When I get to the second CD, however, there is a track listed but it does not play.
    I check all my settings again (I am well versed in using my mac): Burn speed is at maximum and I am burning an audio CD. So I figure that I may be applying too much RAM else where in my comp so I close everything down except iTunes and I try again.
    The process has no hiccups and seems to be fine and it completes. I again put them into check their completion and about half way through the first CD the audio just stops. Both times it keeps playing, but no sound is coming out. I try playing the CDs in other programs and in an external CD player to no avail.
    So this is my problem. I have now wasted 12 CDs. I thought it might be the brand (Memorex) but remember that it did work. The only thing I think I can do is to slow down the write speed (the CDs are cabable of 52x...or so they say) or buy another brand But before I waste another 6 cds I was wondering if anyone had any advice?
    Thanks,
    Whiteonyx
    15" iMac   Mac OS X (10.4.9)  

    Whiteonyx,
    Welcome to the group. I don't have advice for why it didn't work but I can tell you about good CD brands as I've had problems burning music in the paste. From being on this forum I have heard Memorex is bad although I've used them for music with no problem. The best though is Verbatim and that after I ran out of my cheap ones I bought a big bundle of them, Sony is also good, along with Maxell.
    Here is my post on the subject of CDR's awhile back and everyone has different ideas of what is good:
    http://discussions.apple.com/thread.jspa?threadID=713248&tstart=0
    Hopefully someone else will know what is causing your problem.
    S.

  • IOS 8: Spoken audio or speech stops before end of the file

    Hi,
    I try to use iTunes Match on my iPhone (iPhone 6 , iOS 8 latest version). Uploaded files like audio books or other spoken files stop about 30 seconds before the file ends. Unfortunately I can't fix the problem. What can I do?
    It's the same playing the files from the cloud or playing them after downloading.
    It's the same to third party player like écoute.app.
    This problem doesn't arise with music files.
    Who can help me?

    Well, in early iTunes Match days all worked fine with these files. This problem appears since itunes shows the german information "Bestimmung der Information zur unterbrechungsfreien Wiedergabe" (translate.google.de: "Determination of Information for Seamless playback").

  • ITune fails to burn large audio books:The iTune library file cannot be saved. There is not enough memory.

    Hi,
    I am trying to burn large audible audio book to virtual CD and iTune 11.2.2 keeps crashing midway. After spending hours trying to get information off technical forum, here is the description and possible explanation of what is happening:
    The burn start normally, iTune  create 10 tracks of 8 mn per CD.
    The burn progress pass 10 CD (up to 30 CD).
    The a message box with: "The iTune library cannot be saved. There is not enough memory" appears.
    In the back ground the process keeps going for another 2 or 3 CD then stops.
    This is NOT a memory problem:
    My computer still has over 100 Gb of HDD left
    On my i7, only 4 of the 8 core were used.
    The whole process didn't go over 3.5 Gb of RAM (out of 8).
    I reinstalled, iTune.
    I re-imported the files.
    I raised the processes priority to High.
    From the forums, This problem started past iTune 7.x and x64 bit processors whenever iTune used more that 1.5 Ghz of RAM.
    It does follow the behavior of a 32bit bit system going Out Of Memory.
    The way I see this: Apple has to either create a fix to reuse the current iTune memory properly or create an update to 64bit so it can use whatever RAM is available in the computer.
    Does anyone else have any other idea?
    For those who want to play lawyers, I am not American. In my country, it is legal to remove DRM off content that you legally own. The fact that Audible softwares were made by drunk monkeys is enough of a reason.

    Well, I installed the latest iTunes this AM, works perfectly.  Although for some reason it did lock up after playing a song today.
    Horror stories?  That's a bit overly dramatic.
    No, it isn't.
    The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
    A simple search was conducted, no one seemed to have an answer.  Do you always adopt such a haughty attitude?  Or was I just lucky.

  • Audio book cd's burn with text

    Even with the "include cd text" box unchecked my audio book cd's burn with text and when I try to put them on my laptop to listen to them I can't import them into media player because the text is on the first cd.
    How can I get it to stop putting the text on the audio books when I burn them?

    There doesn't seem to be a way to do this just using iTunes. However, I'm aware of 2 approaches to overcome this limitation either by using a 3rd party app on the Mac or the iPod:
    a)Use a utility program on your Mac to join all the track files into a single file and transfer the generated merged file to your iPod. One such utility is called AudioBookBuilder and it's available in the Mac App Store.
    b)If by iPod you actually mean an iPod touch, you can transfer all the individual tracks to your iPod and then use a player app to listen to the audio book, ideally an app that is capable of keeping track of where you stopped listening so that you can resume listening later. One such app is called AudioBookCD and it's available in the iPhone App Store. Disclaimer: I developed the AudioBookCD app to address this need.

  • Unable to burn iTunes Store audio book track to CD - Track to long

    I am unable to burn an audio book I purchased to CD because the track is to long, 2 hours and 8 minutes. I tried setting the start and stop times to be less than 1 hour, but I still get the message. How can I get the track burned to a set of CDs?

    I found a work around.
    1. Select the long track and using get info
    2. Set the start and stop times and check the check boxes next to them.
    3. Create a new play list of the selected track.
    4. Burn a CD using the new playlist.

  • Burning Audio Book to CD

    I purchased and downloaded an audiobook from itunes. It downloaded in 3 parts; however, each part is too long to burn to a CD. Does anyone know a workaround for this? I'd like to burn it so I can play it in my car.

    If you want to make
    b exact
    copies of Audio CD's, you need a burning program like Toast (Roxio.com).
    The alternative is to import your audio book in iTunes, put the chapters in a playlist and then burn that playlist as an Audio CD.
    This will not be an
    b exact
    copy however.
    Depending on the organization of the tracks on the original CD, you might not notice the difference between the original and the copy.
    If you don't have Toast and you only incidental want to make a copy, try the iTunes way, before spending $$ at a program you hardly use.
    Read this article for instructions how to burn an audio CD in iTunes:
    http://docs.info.apple.com/article.html?path=iTunesMac/5.0/en/540x.html
    M

  • Trying to burn an audio-book that is too big for the CD?

    I purchased an audio book (apx 2hours long). I tried to burn it to the CD but it keeps telling me that there isn't enough room on the CD. Is there a way to burn the CD to a folder, then split the tracks up to muliple disks?
    Keep in mind with audiobooks, it's one file, but when you burn it, mulitple tracks are created. (kinda like an .iso).
    Thanks for any assistance.

    DVD's can only hold about 4.7 GB's of DV Stream format (the format used by iMovie).
    DV Stream is 13 GB's per hour of recording so it would take 3 DVD's to "store" your data for a one hour capture.
    "Export" (back to tape) or use iDVD to "burn" an MPEG-2 version of your file.
    Only the "tape" version would not require some type of conversion on import.

  • Sync/burn an audio book in full

    I bought my first audio book. It is 7:23.48 hours long. I tried to burn it to a cd, and sync it to my iphone. IT will only burn and sync the first chapter. (1:61) The book does not show the other chapters on my laptop screen. I go to controls and click next chapters and it will go to next chapter. I can listen to the whole book on my desk top. Any suggestions on how I can get this whole book on my iphone and a CD. Thanks

    With your phone connected, iTunes running, click on the "Book" tab, scroll all the way down, is sync audiobooks checked? If not, put a check in the box.

Maybe you are looking for