Audio Button Not Working after Reinstall of Windows 7 HP DM4

Hey guys i have a HP DM4-1275CA and i decided to reinstall windows (upgraded to Ultimate for school to debloat the computer too) and formatted my HDD (i kept stock recovery incase of emergency ..) and now that i reinstalled it I've installed all the drivers and the button that used to turn white on my laptop only gives me the LED when its off , so when it works there is no led when i shut off audio it shows me the orange LED. I am trying to get the White LED which lets me know audio is on .. how would i go about this? I've tried installing the drivers from HP Website, I've installed both Audio drivers, I've installed the Intel Graphics HD drivers and still nothing! i am getting very frustrated with this .. any help would be appreciated 

Hi:
I'm thinking you need this software...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-91100-1&cc=us&dlc=en&lc=en&...=
Paul

Similar Messages

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Volume button not working after update ios..

    My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???

    Settings > Sounds > Change with Buttons... Make sure this is set to ON.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

  • F5 is not working after update of windows 8.

    f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
    my laptop details are
           Product Name:    HP Pavilion 15-e008tu Notebook PC  

    Hello prem23,
    What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
    If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
    OR
    You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
    After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
     http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03327545&cc=us&dlc=en&lc=en

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
    Make sure all your data is available on your computer for manual syncing later.
    Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
    And you are using iTunes 10.7?
    I'm just trying to help get you going.

  • Home button not working after 5.0.1 update

    Ok now the home button not working after 5.0.1 update.  Anyone have any ideas?  How do I roll backfrom this update?

    This happened to me as well.  AT&T had me reset my network settings and this fixed the problem.  Here is how...
    Settings > General > Reset > Reset Network Settings
    "For now" the problem is fixed for me.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • A1: Home button not working after Ideapad A1 ICS upgrade

    So yesterday I finally tried the ICS upgrade for my Ideapad A1. It worked OK besides all data on internal memory and SD being deleted so I had to reinstall all my apps or restore from Titanium backup.
    In any case the only real problem is that the home button is not working after the upgrade. Does anybody else have this problem and maybe even a solution?
    Thanks!

    Hi, Im using A1 16G and tried to upgrade to ICS for couple of days i read too many articles in different forums....
    Can you put any instruction on how you made it?
    Thanks

  • Sound not working after reinstall

    I have a Toshiba Tecra A8514 and I had to re-install my windows XP  and since then my audio is not working, I have tried to install the audio driver on the site but that didnt work, any help on the matter would be great.

    So you installed this driver without success.
       Realtek HD Audio Driver for Windows XP
    My guess is that you did not install in the correct order. You might want to start over. It's important to install the chipset software followed by the display driver before any other driver.
    --------------------8<------------------- <snip> ------------------
    Install them in this order. Restart after each driver and take the time to test between drivers.  Some will apply and some won't.
    Chipset software
    Display driver
    Sound driver
    Modem Driver
    If your machine has the internal WiFi card, then install the WLAN driver
    ACPI Common Modules
    Toshiba Console
    Display Hotkey utility
    Touchpad Driver
    Toshiba Power Saver Utility
    Toshiba Controls
    Toshiba Utilities
    --------------------8<------------------- <snip> ------------------
    I would restore the hard drive myself. All this stuff is correctly preinstalled. Replacement media can be ordered by calling Toshiba Customer Service at 800-457-7777. Have the computer's serial number and a credit card handy.
    -Jerry

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Maybe you are looking for