"Audio Capture Device not selected" message?  Help please!

Howdy folks,
I just got a new PC, Windows 7 OS, I've installed ManyCam and version 3.2 of FME and am looking to broadcast again.  I don't recall this issue with my old PC (XP OS, Broadcaster StudioPro virtual cam and FME 2.5).  I updated to 3.2 as suggested/recommended in previous posts, but I am getting a message telling me to "please select audio capture devise connected to your system."  What am I doing wrong or might there be something that I need to download that I missed?
Any help you can give is greatly appreciated.  I truly loved using FME 2.5 but am doing like you suggest here.
Peace,

Hello -
My problem was fixed by setting a recording devise in my "sound" menu.
What I did was -
1.  Open the sound menu from the control panel.
2.  clicked on the recording tab.
3.  Chose "Stereo Mix - Realtek High Definition Audio" as my default device.
That solved it.  It was almost too simple.    Hope this helps you!

Similar Messages

  • SB X-fi Xtreme Audio PCI-E Not working correctly help please

    Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!

    First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.

  • When I go to burn an audio cd I get anerror message help please

    When I go to burn a cd I get the following message: The Registry Settings by Itunes for impirting and burning CDS AND DVDS are missing.  Does anyone know how to fix this?

    See this Apple support document related to your issue.
    http://support.apple.com/kb/TS2372
    B-rock

  • How do you select two audio capture devices?

    Hi all,
    At the moment I'm simply using CaptureDeviceManager.getDeviceList to get a list of all the capture devices on my system. Now when I print this it looks like this...
    [DirectSoundCapture : dsound://
    LINEAR, 48000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 48000.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 48000.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 48000.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 44100.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 44100.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 32000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 32000.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 32000.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 32000.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 22050.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 22050.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 16000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 16000.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 16000.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 16000.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 11025.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 11025.0 Hz, 8-bit, Mono, Unsigned
    LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 8000.0 Hz, 8-bit, Stereo, Unsigned
    LINEAR, 8000.0 Hz, 8-bit, Mono, Unsigned
    , JavaSound audio capture : javasound://44100
    LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
    LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
    Now my system actually has 2 michrophones attatched to it. At the moment I'm using DirectSoundCapture to record audio. My first question is, how do you detect multiple audio capture devices? and then of course, how can you record off of different audio capture devices?
    Anything would be helpful, if theres a tutorial somewhere on this which i've missed somehow, please tell me. I'm probably missing something pretty major I figure.

    I posted in a different thread that I was using the old javax.sound.sampled library to try to record. However, using this library it was quite simple to get a list of devices which could then be used to make a SourceDataLine that could be used to record. However, I was having trouble actually recording and switched to JMF as it has more features and I thought it would be simpler to use. It probably is but I have been struggling. I can record audio in JMF fine but I cant get a device list as I could with the javax.sound.sampled library.
    I'll put the code I was working off in here anyway. It shows what I want to do, I just want to do it in JMF.
    Note that this code was written 4 years ago by a Matthias Pfisterer and not by myself.
    import javax.sound.sampled.AudioFileFormat;
    import javax.sound.sampled.AudioFormat;
    import javax.sound.sampled.AudioSystem;
    import javax.sound.sampled.DataLine;
    import javax.sound.sampled.Line;
    import javax.sound.sampled.LineUnavailableException;
    import javax.sound.sampled.Mixer;
    import javax.sound.sampled.SourceDataLine;
    import javax.sound.sampled.TargetDataLine;
         /** List Mixers.
              Only Mixers that support either TargetDataLines or SourceDataLines
              are listed, depending on the value of bPlayback.
         public static void listMixersAndExit(boolean bPlayback)
              out("Available Mixers:");
              Mixer.Info[]     aInfos = AudioSystem.getMixerInfo();
              for (int i = 0; i < aInfos.length; i++)
                   Mixer mixer = AudioSystem.getMixer(aInfos);
                   Line.Info lineInfo = new Line.Info(bPlayback ?
                                            SourceDataLine.class :
                                            TargetDataLine.class);
                   if (mixer.isLineSupported(lineInfo))
                        out(aInfos[i].getName());
              if (aInfos.length == 0)
                   out("[No mixers available]");
              System.exit(0);
    Calling this method on my system will print the following.
    Available Mixers:
    Microsoft Sound Mapper
    AK5370
    SoundMAX Digital Audio
    AK5370 (2)
    This looks very different to what I get when I call CaptureDeviceManager.getDeviceList()
    How can I achieve the equivilent in JMF?

  • Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

    Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

    iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
    Computers are not airplay compatible unless you have downloaded an app to make them so.
    User to user forum, so I don't care if you switch to android or any other threats you make.

  • Media Encoder not finding "audio capture device"

    Hi,
    Im using Adobe Flash Media Encoder with Dxtory for Twitch streaming, and at first it worked fine. Recorded both my mic and game audio perfectly. Then seemingly suddenly, I fired it up  and it wouldn't stream the game audio. It would my Mic, but thats it. I then unplugged the mic and it started saying I had no Audio Capture Device. I checked in Dxtory and its set up the same as it was when it was working. It picks up both the mic and speakers like it should. I have uninstalled this program multiple times, both 3.1 and 3.2 versions, and each time when I re-download it, it loads up the same profile I had before. So when I am uninstalling it, its not uninstalling everything for some reason. Even though the program is no where to be found after its uninstalled. I have downloaded xsplit, and it picks up the game audio and my mic. So its just this program. Anyone have any ideas? I cant seem to find anything online about this issue.
    Thanks!

    From where?  PP sequence?  PP bin?  PP Source Monitor?  Watch folder?

  • Best way to find an Ipad 2 wifi only that has been stolen or lost? Have "Find My Iphone" installed but device not turned on. Please Help!

    Best way to find an Ipad 2 wifi only that has been stolen or lost? Have "Find My Iphone" installed but device not turned on. Please Help! Left in Spirit Airplane in Chicago and no where to be found

    Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    What NOT to do if your iPhone or iPad is lost or stolen
    http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • 2G Nano-USB Device Not Recognized message

    2G Nano has been sitting for months. Decided to use it as a backup. When connected to computer (tried on 4 different computers running iTunes) I get a "USB Device Not Recognized" message. It shows up in "Device Manager" as an "Unknown USB Device" not an "iPod". Have performed the required 5 Rs and it still will not work. Any help would be greatly appreciated!

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • USB Device Not Recognized Message

    Hi,
    I constantly get this message and it also says
    one of the USD devices attached to this computer has malfunctioned and Windows does not recognize it, For assistance in solving this problem, click this message.
    When I click on it,A box appears and is BLANK( It says the location of the device is shown in bold type).
    I went to system devices and uninstalled 5 USB devices and nothing changed except my computer reloaded them?
    I have a Satellite windows Vista.
    Also I can not start my computer at times and when I push F12. It try's to repair the problem and can't it gives me pretty much the same message.
    Can anyone help?? This darn message go off and on constantly..
    Any info/help appreciated, Valerie

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

    Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.

    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Rebuild screen freeze - unable to update firmware as not docking. Help please

    Hello, I've got an 8gb Zen.
    Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
    Ran scandisk on it - no joy.
    Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
    Any help appreciated. Thank you

    QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
    My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
    If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

  • No audio capture device detected Osprey 240e

    I have recently installed Adobe Flash Media Encoder (AFME).  I have installed the Osprey 240e video/audio capture card.  At first, the Osprey 240e was detected by the AFME.  Now AFME is telling me there is no audio device detected.  The video part seems to be fine.
    I have:
    1. Rebooted the computer AFME is installed on
    2. Reinstalled AFME
    3. Reinstalled the Osprey 240e drivers (reboot computer again).
    When I start the AFME program, it still indicates not audio capture device detected.  Any ideas on how to resover the issue.

    You may need to open a support case with Viewcast. They have always been very responsive when I have had problems/questions.

  • How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    Should be able to go into your sound preferences and choose your output device, you can also try downloading Airfoil and try that, it's a pretty cool app.

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • My macbook pro is not charging - any help please!?

    My macbook pro is not charging - any help please!?
    <Edited by Host>

    Hi sdennisonta,
    If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Mac notebooks: All about batteries - Apple Support
    If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
    Apple Portables: Troubleshooting MagSafe adapters - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for