Audio Causing Multicam Crashes - AudioRenderContextConstructor.ccp-110

Hello -
I do a lot of multicam interview edits and am running into a relatively consistent crash inducing scenario, namely, editing a multicam group with any audio inserts applied causes premiere to crash. The official error is related to AudioRenderContextConstructor.ccp-110.
Typically, I'll "master" my audio within the multicam group using 2 inserts on each active channel (usually only 2 audio tracks) - insert 1 EQ, and insert 2, dynamics. Once I'm happy with the mix, I make my camera selections in another timeline using the multicamera editor window. if I leave the inserts active within the multicam group, I'm guaranteed premiere will crash at some point while editing. If I export a mixdown (.wav), and then re-import it back into the multicam group while disabling the inserts, I'm less likely to crash, but still no guarantees. I've also tried doing an external mix in audition, using the send to audition feature, and it's still crashing on a pretty consistent basis.
I emptied my media cache and reset my preferences yesterday morning, but crashes started coming back by the afternon. Same thing today.
Is there anything I can do to avoid this very annoying problem?
System config:
Mac OS 10.8.2
PPro 6.0.2
Mac Book Pro Retina 2.7 Ghz i7, 16gb ram, 768 SSD
External 1920 x 1200 monitor connected via HDMI
Respectufully,
Carl Larsen
Telescope Media Group

I do not have soundflower installed.
I do, however, have screenflow (a screen recording app) installed, if that's important. My only expereince with soundflower was when it came bundled with another screen recording app called iShowuHD, which I have never had installed on this machine.

Similar Messages

I have files that freeze my programs whenever I try to open ANY file. Is there a way to find the exact files causing the crash?

I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!

This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan

Using Disk Warrior on external drive causes MacBook crash

I work on MacBook System 10.6.7, I back up to LaCie external drive, which I partitioned so that one partition is only for backup, the other is bootable. On this partition I have a clone of Disk Warrior (4.1), to use on the MacBook .
Today I ran DW from the MacBook on the external drive for the first time, because lately it happens that the backup partition does not always appear in the finder (still performs back up though). I applied it first to the boot-partition, and it told me there were some problems. When it got to replacing the directory, the computer crashed mid way.
I performed Disk Verify on that partition through Disk Utility, and it said that it needed repair, and then that it did repair it. Checked other partition, no problem.
Tried again to rebuild directory for the external drive, and both partitions caused the MacBook to crash. I then booted from the external drive to see if it works, and ran DW on the MacBook, and had no problem there.
Anybody can tell me if it is the MacBook that caused the crash, or if the problem is with the external, and if there is anything else I can try to sort it out?
thanks,

I work on MacBook System 10.6.7, I back up to LaCie external drive, which I partitioned so that one partition is only for backup, the other is bootable. On this partition I have a clone of Disk Warrior (4.1), to use on the MacBook .
Today I ran DW from the MacBook on the external drive for the first time, because lately it happens that the backup partition does not always appear in the finder (still performs back up though). I applied it first to the boot-partition, and it told me there were some problems. When it got to replacing the directory, the computer crashed mid way.
I performed Disk Verify on that partition through Disk Utility, and it said that it needed repair, and then that it did repair it. Checked other partition, no problem.
Tried again to rebuild directory for the external drive, and both partitions caused the MacBook to crash. I then booted from the external drive to see if it works, and ran DW on the MacBook, and had no problem there.
Anybody can tell me if it is the MacBook that caused the crash, or if the problem is with the external, and if there is anything else I can try to sort it out?
thanks,

Use of discrete graphics causes hard crash - (MacBook Pro 2010 with ML 10.8.2/3)

I have a client with a Mid-2010 MacBook Pro. He was having crashes with Lion so I upgraded him to Mountain Lion 10.8.2. The crashes did not go away.
I troubleshooted and with the help of gfxCardStatus noticed that every time his machine went to use the discrete graphcis he got the gray hard crash screen and system had to restart. Back then I tried a beta of 10.8.3 and it didn't help.
I noticed that if I created another user account (profile) it would not crash when the discrete graphics card was called upon.
So, I re-installed the OS (to 10.8.2), created a new profile and manually migrated pictures, documents, keychain, mail, movies, music and re-installed the relevant Applications. Everything was working fine and my client went on a trip to Europe and soon the crashes began again. Then he upgraded to 10.8.3 and the crashes got even more frequent (it seems 10.8.3 puts more applications on the discrete graphics list so it switches even more).
I am wondering what could have caused the crashes to begin. It was before he upgraded to 10.8.3. Some application or something he was using must have changed a setting or corrupted something to cause the crashing to begin. I haven't done this yet, but I'm sure if I create another user account it won't crash on it.
Any ideas where to turn my attention to see what is causing the shift from his working user account to a crash-causing one?
He has iLife, Office 2011, Final Cut Pro X, iPhoto Library Manager, VLC, Audacity, DropBox, FileMaker Pro 11, Flip4Mac Player, Fuze, GotoAssist, Handbrake, Skype, iSkySoft DVD Creator, iSkySoft Video Convertor, Onyx and Skype.
I know there are *MANY* others having problems with the automatic graphics card switching and it seems some are having more problems when gfxCardStatus is installed?
- Elan

is this your MacBook:
TS4088- MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Take a copy of the article with you when you go for service. They need to run a SPECIAL diagnostic to decide whether you have this problem. Do not leave until they run the special diagnostic. The "overnight run" does not detect this problem.
If they confirm you have the problem, they will replace the graphics chip, which is part of the motherboard. be prepared to hand over your Mac for depot repair. (Your backups must be up-to-date).

Is there a way to track down the cause of crashes in SAFARI?

Not long ago I was able to eliminate one type of crash I had been having in SAFARI by following a suggestion made in this forum. Those crashes, however, were of the type that generated a 'crash report.' So they left a kind of 'paper trail' as to what was causing them.
More recently I have been having frequent crashes that don't result in such reports. These crashes occur apparently randomly when I mouseclick on a link. The spinning beach ball appears on-screen and never leaves.
Is there a way to find out exactly what is causing these crashes?
Thanks.

Hello Michael:
I have not yet seen a
good approach to using that information (short of
deleting the account).
better search some yourself Barry <G>
if something runs fine in another account - one can isolate the cause to one of the plist files in the main acct Home/Library/Preferences/ or possibly an add-on in Home/Library/Internet Pug-Ins or ...Input Managers for example.
If there is the same problem in the new acct - you can discount anything with the main acct user library - plists,caches,plugins,input managers, the whole lot.
A useful tool is Console - found in Applications/Utilities/ keep it running while the 'problem' in question crops up & see if any messages pop up in either the system log or console log. Sometimes these will point straight at the problem area, other times no help at all.

Sticky Notes in a pdf file cause ie7 crashed.

This is a very interesting bug.
System version: Windows XP with SP3
Adobe Reader Version: 9
IE version: IE 7
Files needed for testing:
a pdf file (note.pdf) with Sticky Note displayed.
a html file (note.html) which has a url link to note.pdf
Action which causes the crash:
1.       Open note.html in a new IE window
2.       Click the link to open the note.pdf in a new window or a new tab, then close it
3.       Click AGAIN the link to open the note.pdf in a new window or a new tab, then close it
Then you could see the error window popup, the ie7 browser crashed. This has been tested in 3 PCs.
Check the Error Event, it said:
Event Type:        Error
Event Source:    Application Error
Event Category:                None
Event ID:              1000
Description:
Faulting application iexplore.exe, version 7.0.6000.16850, faulting module msvcr80.dll, version 8.0.50727.3053, fault address 0x0001e898.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 78656920 726f6c70 78652e65
0020: 2e372065 30362e30 312e3030 30353836
0030: 206e6920 6376736d 2e303872 206c6c64
0040: 2e302e38 32373035 30332e37 61203335
0050: 666f2074 74657366 30303020 39386531
0060: 0a0d38
The bug doesn’t happen to IE 6 and Fixfox

Try Goodreader in the App Store. It should do the job for you.

KB3038314 causing IE crash

hey all,
hopefully i have the right forum for this question.
the IE cumulative update for the past few months has been causing IE to crash on one of our internal websites.
the March update (3032359) has a documented issue with table-based websites (which our internal site is); this issue isn't documented for the April update (3038314), however it's still crashing IE on this website.
if i understand the cumulative updates correctly, they're a roll up of individual IE updates. from what i can see, there's no way to uninstall these updates one by one.
my current theory is there's an offending update within the cumulative that's causing the crashing issue, but not sure how to isolate the offending update.
make sense? any help is appreciated.
thanks!

Hi Matt,
>>if i understand the cumulative updates correctly, they're a roll up of individual IE updates. from what i can see, there's no way to uninstall these updates one by one.
Yes, your understanding is correct. Please try to remove this update.
If this issue is very urgent, you may contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope the issue will be resolved soon.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
thanks for the response; is there a way to uninstall individual updates that are included in the cumulative?
it's likely that one of these updates is causing our issue, and until we determine the offending update, we'll likely continue to encounter this issue going forward with the cumulative updates.
i can contact Microsoft support, but if there's a way for me to uninstall each update manually, i can easily take the time to troubleshoot this on my own.
any ideas?
thanks!

OVM 3 Generic Storage Plugin. Acess Group configuration causes server crash

Our iSCSI management is currently entirely done manually at the servers console, because we still don't have a SAN Equallogic storage plugin.
At OVM Manager interface, what we thought being just useless in our case (SAN Access Group), is the actual iSCSI connection (and disconnection..) management for servers.
Following the upgrade to 3.2.1, setting up the SAN did nothing more than what we do manually. But undoing part of it caused the crash.
All over OVM Manager, any operation/setup that could impact running VMs is denied... Except there, at the real root of everything.
Removing a iSCSI initiator from that panel disconnects abruptly the iSCSI disk, !!!! without warning !!!!.
Then, after the 60s timetout, the physical server reboots.
It is still not clear if we get a benefice to setup that "Access Group" of the SAN or not. At least, once setup, we know that we'd better keep it...

Updating OVM 3 host to use "brbond0" vs "xend" managed bridge to allow direct hosting of OVM Manager VM.
Update "ifcfg-bond0",
[root@ovm322 ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
BONDING_OPTS="mode=1 miimon=250 use_carrier=1 updelay=500 downdelay=500 primary=eth0"
ONBOOT=yes
BRIDGE=brbond0
Create "ifcfg-brbond0",
[root@ovm322 ~]# cat /etc/sysconfig/network-scripts/ifcfg-brbond0
DEVICE=brbond0
BOOTPROTO=bridge
ONBOOT=yes
IPADDR=A.B.C.D # IP address of ovm322
NETMASK=255.255.254.0
NETWORK=A.B.C.0
GATEWAY=A.B.C.1
Update "/etc/xen/xend-config.sxp",
# Enable network-bridge, JAP 20120618
# Disable network-bridge, JAP 20131223
#(network-script network-bridge)
Update "vif" for OVM Manager 3 "vm.cfg",
[root@ovm322 ~]# grep ^vif /etc/xen/auto/ovm322-m
vif = ['type=netfront, bridge=brbond0']

Emptying iPhoto trash causes iP crash

and it rhymes!
Using latest version of iPhoto, I was deleting a number of photos a week ago or so when iPhoto crashed. When I re-opened iP after a restart, everything seemed okay, so I proceeded to add more photos to the trash folder and tried again. It crashed again. It's obviously doing something because all of the thumbnails for the photos in the trash are gone (nice little box with dotted line) and if I try to view a full size image, it gives me a big box with a small question mark in the middle.
The left info window shows the file size, date, etc of each photo still so it seems to me that the photo is still there, but not displaying, not to mention that I can't delete the 1 GB or so of images I have in there. I've tried doing everything in the ctrl-option window but to no avail.
Is there any way I can get rid of these photos? Thanks!

I can't figure out how to delete, so this has been solved. It was just one file from another persons camera that was causing the crashes. Removed that, deleted all the rest and then deleted the one photo by itself. MAGIC!

Ad exception causes app crash

hi guys,
In my app i am using a ad control.It works fine in windows phone 7 .But in windows phone 8 it causes crash my app.I used a ad_errorOccured event and there it says capabilities missing(ID_CAP_MEDIAIB).But I have checked all the capabilities in windows phone
8.All have been checked in WMAppmanifest file.
System.Diagnostics.Debug.WriteLine("ad error " + e.Error.Message.ToString());
message---e.Error.Message = "Required capabilities are missing from manifest (WMAppManifest.xml): ID_CAP_MEDIALIB."
where as all media capacity has been enabled,dont know what is causing my crash app........
pls help
dj_Fox

Hello,
You should ask in the
Windows Phone Development forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

No audio in multicam CC

Hello, working in Premiere Pro CC and can not get audio in multicam to work for some reason
(1) selected clips AND THEIR AUDIO in timeline and selected Nest
(2) enable multicam
(3) double click nested compostion in timeline to open Multicam Window
- no audio inside that window, when i go back to timeline i hear it just fine. WTF

Double click opens it in the Source Monitor. You can't cut it there. Click the wrench under the Program Monitor to change to multicam view there.

Vodaphone dongle causes panic crash. Help please?

It is essential for me to use a Vodaphone dongle for certain work purposes. After installing Snow Leopard, dongle caused panic crash in my MacBook Pro. 4 panic crashes and reports to Apple later ... alert message appears as follows.
" System/Library/Extensions/USBExpressCard can't wake_Huawei.kext"
Check out support and hit on Welcome Wake Up issues. More like Unwelcome! Is this the problem?
Have reinstalled Leopard since this dongle is the only way to connect at work.
Any ideas?

Hi everyone
Vodafone really have not excelled here but today tracked down a solution using the GlobeTrotter application to intall the right modem driver (not sure but I think this was the problem causing kernel panics)
Here is how to do it...
1. Make sure you delete any extension from the System/Library/Extensions folder containing the word "Huawei" in the file name
2. Restart
3. Download latest version of Vodafone Mobile Connect (which by itself will still cause kernel panic if you install and then plug dongle in and install.
4. Download latest version of GlobeTrotter Connect (http://support.option.com/att/index.php?title=GT%20Connect%20for%20Mac%2010.4.11 ,%2010.5.x%20and%2010.6.x%20and%20Manual&action=module20/index)
and install it.
If asked to confirm new network preferences do so - this I think installs the updated modem driver which I think was the source of the kernel panic previously.
5. Then insert USB modem - should not cause kernel panic!
6. Then run the Vodafone Mobile Connect software and press Activate
It works and does not crash!!
Good luck!

Installation Is Causing The Crashes?

How Do I Know A Conflicting Flash Installation Is Causing The Crashes?
yabancı dizi izle

Read Before Posting: How To Get A Useful Answer To Your Question

Shockwave 10.3 causes IE crash with QuickTime

Shockwave 10.3 seems to have introduced a problem using
QuickTime cast members. A movie which was working fine before now
causes intermittent crashes (about 25% of the time) on PC IE 6.
I've isolated the two lines of code which trigger the crash to the
following:
video.fileName = videoPath (where "video" is a QuickTime
castmember)
and
if (video.trackCount() = 0) then...
I'm guessing that both of those properties cause the .dcr to
access the external video file... could that be what's causing the
problem? Any help would be appreciated.
Thanks,
Erik

Shockwave 10.3 seems to have introduced a problem using
QuickTime cast members. A movie which was working fine before now
causes intermittent crashes (about 25% of the time) on PC IE 6.
I've isolated the two lines of code which trigger the crash to the
following:
video.fileName = videoPath (where "video" is a QuickTime
castmember)
and
if (video.trackCount() = 0) then...
I'm guessing that both of those properties cause the .dcr to
access the external video file... could that be what's causing the
problem? Any help would be appreciated.
Thanks,
Erik

MacBook Audio/Midi setup crashes in Midi

Hello all,
I have a MacBook C2D and a Korg Microkontrol connected via USB. The MacBook sees the MicroKontrol, but only as midi in and out instead of 5 midi ports it should have. When I click on the Microkontrol icon, Audio Midi setup crashes.
I would like to use the 5 ports - any ideas? I run Ableton Live and it sees all 5 ports and uses them.
thanks,
dustspec

Thanks for that Bob - The article was very helpful but I am still crashing. I'll have another look at the logs and see if I can find the problem.
My MOTU Ultralite is coming up greyed out in the midi devices section so maybe that is part of it?
dustspec

Audio Causing Multicam Crashes - AudioRenderContextConstructor.ccp-110

Similar Messages

Maybe you are looking for