Audio-CD Wiedergabe / Import nicht möglich
Hallo zusammen
Habe schon etliche Themen zu meinem Problem in diversen Foren durchforstet. Habe dabei auch einige Lösungsvorschläge gefunden, allerdings vermochte keiner mein Problem lösen.
Ursprünglich konnte ich in iTunes Musik-CD's wiedergeben und diese auch importieren. Seit einer gewissen Zeit, geht dies nun jedoch nicht mehr. Wenn ich eine Audio-CD einlege, startet iTunes automatisch, allerdings wird die CD links in der Navigation nicht angezeigt, also kann ich sie weder hören, noch importieren. Ich habe den Versuch mit verschiedenen CD's durchgeführt, ältere und neuere, keine Chance. Jedes andere Audio-Programm, das ich installiert habe, erkennt die CD problemlos. Habe es mit und ohne Fehlerkorrektur versucht. Habe sämtliche Apple Software komplett deinstalliert und iTunes dann neu installiert, keine Veränderung. Was kann ich noch tun?
Ich bin überzeugt, dass es wieder funktionieren würde, wenn ich das System (Windows 7) neu aufsetzen würde (Recovery). Aber das wäre ein grosses Problem für mich. Brauche diesen Computer unter anderem für geschäftliche Zwecke, dafür habe ich diverse Business Software installiert, dessen Daten ich nicht einfach mal so sichern und wieder herstellen kann.
Bitte helft mir.
Can you import from CD with Windows Media Player? If so a temporary workaround would be to rip into mp3 format and then move the songs into the "Automatically Add to iTunes" folder.
Translated by Google. I hope it makes sense.
See also http://support.apple.com/kb/TS1584?viewlocale=en_US
Kannst du von CD importieren mit Windows Media Player? Wenn dem so ist eine vorübergehende Lösung wäre es, ins MP3-Format rippen und dann die Songs in die "Automatisch zu iTunes hinzufügen"-Ordner.
Übersetzt von Google. Ich hoffe, es macht Sinn.
Siehe auch http://support.apple.com/kb/TS1584?viewlocale=de_DE
tt2
Similar Messages
-
Ein Import von Bildern in IMovie ist nicht möglich. Es erscheint anstatt des Bildes nur ein grünes Fenster. Was ist zu tun?
Wenn man eine "Rescue email Adresse" aufgesetzt hat, kann man die Sicherheitsabfragen bei "MyApple ID" https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ zurücksetzen: Dann bekommt man eine email von Apple an die "Rescue Adresse" und kann die Fragen und Antworten neu einrichten.
Ohne Recue email Adresse hilft nur der Anruf bei AppleCare http://support.apple.com/kb/HE57); die können die Antworten zurücksetzen. -
AVI Export in Full HD-Auflösung in Premiere Elements 10 PC nicht möglich
Ich verwende Premiere Elements 10 auf PC und habe ein Video Projekt in Full HD (1920*1080) erstellt,
dass ich in bestmöglicher Qualität exportieren möchte, um es mit Soerenson Squeeze zu komprimieren.
Der AVI Export lässt bei mir jedoch keine Full-HD-Auflösung zu. Das File wird per Werkseinstellung auf 720*576 reduziert.
Es erlaubt keinen Zugriff auf die manuelle Skalierung.
Was tun?
Mit welcher Einstellung kann ich in Full HD und unkomprimiertem Audio exportieren?
Vielen DankHi ATR,
thank you for your advice.
I´m just testing your setup but it serves actually not completely my
purpose.
My aim is to export one AVI format with an as good as possible
resolution to serve as a master file to be subsequently
compressed with the Soerenson Squeeze Pro to various different
distribution formats.
I need to do it with the Soerenson Squeeze as I get the presets from my
distributors so that I can deliver different output
to the particular distributors.
The problem is that premiere elements does not offer individualized
pixel size within the AVI export option.
I have now purchased Premiere Pro (within CC), trying to open the
Element projects in Premiere Pro.
Unfortunately it does not work. Just the source files are imported but
not the actual movie project with the time line
so that I would have to start from scratch which is no option at all as
I´m done with a 1h:30min tutorial.
If you have advice on the AVI export of Elements or how to import the
full project with Premiere Pro you would make me happy.
Thanx
Friedemann
Am 12.04.2015 um 20:11 schrieb A.T. Romano:
>
AVI Export in Full HD-Auflösung in Premiere Elements 10 PC nicht
möglich
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano>
in /Premiere Elements/ - View the full discussion
<https://forums.adobe.com/message/7431323#7431323> -
Wieso ist es nicht möglich vom Iphone auf ITunes Musik zu synchronisieren?
Wieso ist es nicht möglich vom Iphone auf ITunes Musik zu synchronisieren?
You can't use songs you buy from itunes in Garageband because of copy protection. You can burn them to CD and import them.
Am I anywhere close to the right answer. -
Anmeldung ist auf diesem Computer oder Gerät nicht möglich.
Hallo,
wir haben mehrere Abonnements bei Adobe (1x Vollabo, 1x InDesign) über den gleichen Account/ Adobe-ID. Jetzt wollten wir InDesign auf einem Desktop und einem Laptop (beides der gleiche Nutzer (InDesign-Abo)) installieren und einmal InDesign bei einem weiteren Nutzer auf dessen Desktop (Vollabo). Dies sollte eigentlich so funktionieren. Leider bekommen wir immer die Fehlermeldung: Anmeldung ist auf diesem Computer oder Gerät nicht möglich. Diese Adobe-ID wurde bereits verwendet, um die Software auf zwei anderen Computern zu oder Geräten zu aktivieren. sobald wir von einem dritten Computer zugreifen wollen. Die anderen Computer/ Nutzer sind nicht angemeldet!
Haben wir etwas übersehen, was man noch einstellen muss? Oder kann uns jemand sagen woran das liegt?
Vielen Dank!Du musst Dich an einem der anderen Geräte von der Creative Cloud abmelden. Du kannst nur zwei Geräte mit dieser Lizenz angemeldet haben. Ob die Nutzer an diesen Geräten angemeldet sind, ist egal.
-
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
FAQ: How do I troubleshoot audio issues when importing .MTS files?
Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Audio Drift when importing VHS Tapes-Do I need a Canopus ADVC 300
Embarking on the daunting task of importing/editting >100 2hr VHS tapes, and want to get the best results for my efforts.
I pop a tape into a VCR connected via S-Video (video) and RCA (audio) cables to a Sony DVMC-DA1 AD converter, and from there to my Mac Pro via Firewire. Use FCE "Capture Now" using NTSC DV Converter setup. Start capture, let it run unattended, and return at my leisure to do some rough editting.
Problem is the audio on the imported clip gradually loses sync, by about 2 seconds by the end of the clip. The sync problem is present on the clip when played with Quicktime as well.
Questions:
1. Is there a reasonable way to correct this in FCE?
2. Since my Sony converter is nearing 10 years old, will use of a more recent AD converter such as the Canopus ADVC 300 result in a perfectly synced import?
3. If so, can you comment on the Canopus's purported video noise reduction and image stabilization capabilities? Is it noticable/worthwhile?
Thanks for your time.Hello,
The problem is the audio is not 'locked' to the video, and your old Sony DVMC-DA1 does not appear to support locked audio.
The only way you might deal with this in FCE itself would be to capture shorter clips (say, under 15 minutes each) which would minimize the degree to which the audio drifts out of sync in each clip. (The longer the clip, the greater the drift.)
Given the large amount of video you wish to digitize (some 200 hours), it will be far preferable to use a Canopus ADVC-100, 110 or higher model - +they all support DV locked audio+ - so the video & audio are sync'd without the need for manual intervention or capturing short clips.
I have used the Canopus 100 & 110 extensively and have been very happy with the results. Sometimes, depending on the VHS tape, there is some slight banding at the very bottom of the image but 1) this is +usually not visible+ in the finished movie because it is outside the 'image safe area' and 2) if necessary can be compensated via about a 2%-4% enlargement of the image in FCE (which is not enough to soften the image).
I have not used the Canopus 300 because I never felt the need, as I am happy with my results from the 100 & 110. Users of the 300 have been pretty positive about its built-in TBC and image cleaning capabilities. -
What's the highest quality audio format to import CD?
I've a 40 GB iPod. the system default to AAC. But i'm planning to buy a Shure e4c ear-plug and want to make sure i've the best quality audio format recording in the ipod.
could someone tell me what audio format yields the best audio quality to import CD? i'm only used less than 20GB of the ipod.
so i don't mind using the best audio format which may take the most space.Simple answer: Apple Lossless. You will hear the song at the same audio quality level as on the CD--at about half the size.
-
I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?
What version of iMovie?
What camera? -
Installation von Photoshop Elements 12 mit win 8.1 nicht möglich?
Installationsabbruch (PSE 12) durch Fehler bei der "Installation Gemeinsame Technologien". Nach Neustart will Installationsassistent PSE 12 entfernen - die aber nicht vorhanden ist. Damit ist Wiederholung der Neuinstallation nicht möglich .Alle techn. Voraussetzung für Installation erfüllt.
Was tun?http://forums.adobe.com/message/5982666#5982666
-
PS CS3 uns AE CS3 aktivierung auf neuem iMac nicht möglich
ich habe einen neuen iMac 21" und die Daten von dem alten iMac migriert. Nun kann ich PS CS3 und AE CS3 nicht mehr aktivieren. Bei dem Versuch es über das Internet zu tun, kommt die Meldung "keine Verbindung".
Die 7 Tage sind schon rum.. was kann ich tun?Hallo,
ich habe heute PS CS3 mit Hilfe einer Kollegin (Manja Kügler im Chat) von ihnen auf dem neuen Mac aktiviert, über den Punkt telefonische Aktivierung. Das hat super geklappt.
Mit After Effects CS3 geht das auch, nach ihrer Aussage.
Sie brauchen nur die Sereinnummer und die Aktivierungsnummer. Daraufhin gab sie mir einen Autorisierungscode.
Hier die Seriennummer: 1023-0046-1462-2509-5636-1057 After Effects CS3 professional.
Die Aktivierungsnummer: 2829-1191-0792-9742-4033-2721-6550-4959
Es wäre nett, wenn sie mir die Autorisierungsnummer zusenden können.
Mit freundlichen Grüßen
J. Weider
W.A.V.E. creative media
Inh. Joachim Weider
Borngasse 8
55234 Flomborn
Tel: +496735 226443
mobil: +491522 1987412
e-mail: [email protected]
Am 06.08.2014 um 11:34 schrieb Willi Adelberger <[email protected]>:
PS CS3 uns AE CS3 aktivierung auf neuem iMac nicht möglich
created by Willi Adelberger in Deutsche Foren - View the full discussion
Migration geht bei Adobe-Produkten nicht. Die musst Du schon vom Originaldatenträger installieren.
Zudem habe ich Zweifel, dass CS3 mit Deinem neuen Mac und dessen OS kompatibel ist. Da wirst Du wohl upgraden müssen.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6616125#6616125
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Deutsche Foren by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Adobe Acrobat XI Dieses Dokument ist geschützt Bearbeitung nicht möglich
Hallo Community,
Ich habe folgendes Problem. Habe mich vor Wochen dazu breitschlagen lassen für jemand PDF Formulare zu erstellen ind denn auch Berechnungen ausgeführt werden.
Hab die Dokumente in Illustrator erstellt und später in Acrobat die Formularfelder eingebaut...... hat auch alles super geklappt
Jetzt einige Wochen später sind an dem Formular Änderungen gewünscht......
Leider wir mir nun folgendes angezeigt: Dieses Dokument ist geschützt Bearbeitung nicht möglich
Da ich keine Lust habe alle Formularfelder neu zu erstellen wollte ich fragen ob es eine Möglichkeit gibt das Problem anders zu lösen.
Bin in Sachen Acrobat und PDF noch ein Neuling....
Hoffe Ihr könnt mir helfen...
Vorab schonmal Danke
Gruss Ollidanke erst einmal.
Hab es dann selbst rausgefunden. Ein Passwort hatte ich gar nich vergeben. Konnte das Formular erst wieder bearbeiten nachdem ich eine Kopie gespeichert hatte.
Die Kopie konnte ich dann wieder bearbeiten..... wie gesagt Neuling in Sachen Formulare und Acrobat. -
Hallo Zusammen,
ich möchte die Voreinstellungen bei 3D-PDF: "Modell-Rendermodus" --> "Gefüllte Kontur" und "Zusätzliche Beleuchtung aktivieren" --> "Scheinwerfer" im Acrobat Reader setzen.
Bisher leider ohne Erfolg.
Nach dem Schließen des Dokuments gehen die Einstellungen verloren, auch wenn unter Voreinstellungen/Dokumente/Öffnen-Einstellungen der Kenner "Letzte Anzeigeeinstellungen beim erneutem Öffnen von Dokumenten wiederherstellen" gesetzt ist. Unter 3D-Voreinstellungen gibt es auch keine Möglichkeit.
Sollte es tatsächlich nicht möglich sein, an wen könnte ich mich mit der Bitte der Implementierung für kommende Versionen bei Adobe wenden ?
Grüße,
Johannes1710Das hat mit dem Reader gar nix zu tun und da die Technologie nicht mal mehr von Adobe betreut wird, kannste da Mails schreiben, bis dir die Finger bluten und es wird sich trotzdem nix ändern. Die Rendereinstellungen werden auf Dokumentebene festgelegt von dem, der das Ganze erstellt und wenn der sich eben keine Mühe macht, dann werden nur die Standardeinstellungen genommen.
Mylenium -
.mov audio doesn't import
I've been importing a .mov file that has audio but the audio doesn't import. What should I do?
According to Flash's Help…
"If you attempt to import a file format that is not supported on your system, a warning message appears that the operation cannot be completed. In some cases, Flash might import the video but not the audio in a file. For example, audio is not supported in MPG and MPEG files imported with QuickTime 7 on Mac OS. In such cases, a warning indicates that the audio portion of the file cannot be imported. You can import the video without sound."
So this may be an issue with the format of your particular video clip. If you have Quicktime Pro, you can try exporting the movie again using a different format for your sound options such as "AAC" or something.
Maybe you are looking for
-
Export all tables' name under user by informatica
Hi, I have a requirement about informatica mapping, we want to user one mapping to export all tables' name under user, like sql : SELECT t.OWNER || '.' || t.TABLE_NAME || FROM all_tables t WHERE t.OWNER = 'BIEBS'; How to realize it? Thank you!
-
Use macbook to manage 1 itunes library in a server
Hi all, I'm planning my move to MAC but need the answer to some key questions before. I'm planning on having a itunes installed on a mac mini (server) connected to an external USB hard-drive holding all my music. I don't want to use this server itsel
-
I can no longer access all the music in Itunes. I could before but now only can see 5 albums on AppleTV so I can tell it's finding my computer
-
I have dvd video linked, how can I make it loop on a chapter?
I have the video playing using the code below...I simply want the same chapter to loop when it gets to the end. Any help would be greatly appreciated!
-
Can't open Safari because it is not supported on this type of Mac
mac OS X mavericks was a sleep and now can not open Safari, gives message: You can't open the application Safari because it is not supported on this type of Mac. How can I get the Safari working again?