Audio changes not affected in final sequence

I am working in Final Cut Pro 7
An occasional problem I am getting is: I work with several sequences, nine in total, before dropping them into a final sequence. I decide the audio needs altering in sequence number 3. I open up sequence 3 and alter the audio level. This change is not transfered to the final sequence. So I delete sequence 3 from the final sequence and insert the new amended sequence 3 but the changes are still not transferred to the final sequence even though when I open up sequence 3 the changes I made are there?
This morning this has gone a stage further. I altered the audio on a sequence within the final sequence and the changes were transfered to the final sequence - great!
Until I created the movie and the changes aren't in the movie but they are in the final sequence.
I hope you can follow that.
Any suggestions welcome.

Not exactly sure what you're describing, but  "nests" sometimes have problems updating.  To force an update, simply select the nest in the containing sequence and hit control-b twice (toggle clip enable), or control click and choose remove attributes, make sure nothing is checked and hit ok.   I used to have this problem occasionally in earlier versions of fcp, but haven't seen it recently.
Make sure you understand how nests work.  To make changes to a nest double click on it in the containing timeline.  It will load as it's own tab in the timeline.  Make changes there.  They should be reflected in the containing timeline.  If not, try the solutions described above. 
If you still have problems, consider simply copying the contents of your source timelines into a new timeline.
Oh yeah, you might try deleting your preferences.  www.digitalrebellion.com's preference manager does a great job.

Similar Messages

  • Persisted changes not affecting session

    Greetings,
    In some local portal code that I am writing, I allow the current (logged-in) user to add himself or herself to one group out of a specific list of groups. This is accomplished by calling IPTUserGroup's AddUser function. The change is immediately persisted to the DB (I check the user's group memberships with my admin account). However, in the current user session, the user's group memberships are NOT updated. Thus, when trying to get places in the portal where members of the group that he or she was just added to should be able to go, he or she gets an error message stating that access is denied. Only if he or she logs out and logs back in does the session have the new group membership (obviously, as it acquired such information from the database on login).
    Is this by design? It seems to me that if you make a change that affects the user's group memberships in the database, it should also update the session! What is the point of adding a user to a group if the portal will still consider that user to not be a member until logging in again? I realize that normally a user would not be able to do such a thing as this mid-session (unless as an administrator in administration). Nonetheless, is there any way to refresh the user's session data that holds his or her group memberships? Or is there a way to terminate the session programmatically and use IPTSession.Reconnect(sLoginToken) to perhaps force the session to acquire data from the database again? I need the user's group membership data in the database to be reflected in the session immediately. Any help would be greatly appreciated.
    Regards,
    Andrew Bays
    bdg | [email protected] | http://www.thebdgway.com

    Hi,
    sorry that I can't really help you, but we had/have same problem. Changes are not updated in current sesssion. See topic "UserProfile updated only when user log out". Our solution was to logout and login in background.
    Regards.

  • How to get around audio clips' audio changes not working

    Here is how I got around the annoying (and recurring) problem of audio clips not being adjustable. First, it's a good idea to add your music track as the very last thing you do. Often, when I am editing a video together, as soon as I drop in a full length music track, I'm no longer able to make changes to my audio clips. So now I drop in the music track as the very last thing I do to my project. If I want to test a music track in the file, then I drop it in, press Command G to preview my project, and when I'm done previewing the project with the music track, I immediately press Command Z to undo the addition of the music track. If, for whatever reason, I'm still having problems with audio clips no longer updating changes I make to them, I have discovered a trick that works: make the changes to the clip's audio, then copy the clip, then delete it, then paste it. The pasted version should now have the updated audio adjustments. Worked for me, anyway.

    Hi,
    Have you tried the very first link ? Please try it now if still no luck please use    Scan now    from the following link:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5318926
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why Are My Audio Changes Not Saved?

    I'm using iMove HD 6.0.3. When I select a clip in the timeline viewer whose volume I want to change and I drag the slider to decrease the percentage the change is not recognized when I play the project again. I don't see an "apply" button anywhere or "add" or "update" but I assume there must be one somewhere because the way I'm doing it now isn't working. It's a very short project. Just 2 clips - the first one is 7 seconds the second is 12. Was just experimenting a little here.

    You don't say which Mac you're using, or how much RAM you have, etc.
    If your changes don't seem to have been recognised, try exiting iMovie and then restarting it. iMovie temporarily stores some video in a memory 'cache', and replays your video from there, without 'checking back' to see if there's a different version on the hard disc.
    You could also try using ⌘S to Save your project after adjusting the audio, thus forcing iMovie to 'pay attention' to what adjustments you've just made.
    Sometimes this happens just the first few times you use iMovie ..it then gets 'run in', and gets to know where and when to store and replay your material. Most programs need to build, er, what are they called, "pre-bindings" the first few times you use them, to create links with other software which they utilise or interact with. This may be one of those 'early times' in which your iMovie needs to get properly 'run in'.
    Seriously!

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • Equipment changes in ECC not affecting in CRM

    Hi,
    Equipments from ECC are loaded in CRM. Then any changes done for equipment in ECC, not affected those changes in CRM. What needs to check for this to happen.
    rgds,
    balu

    Hi,
    Thanks for the quick reply...
    1. In CRM,
    SPRO->CRM->Master Data->Installed Base->Replication of Technical Objects from SAP ERP->Define Default Settings for Replication of Equipment
    i hv activated Delta Load check box.
    2. No changes are affecting for all equipments.
    3. In table TBE31, following data is maintained:
    EVENT : 00001270
    APPLK : BC_MID
    FUNCT: CRS_MATERIALRT_COLLECT_DATA
    EVENT PM000020
    APPLK BC-MID
    FUNCT EQUIPMENT_COLLECT_DATA
    In table CRMRFCPAR, field DISCARDDAT has not checked.
    rgds,
    balu

  • I have transferred all my music from iTunes onto my USB to play on my car audio radio. The radio reads the music but does not play it in sequence. There is a specific way to save the music into folders and name them. I have a Pioneer DEH-2350UBSW.

    I have transferred all my music from iTunes onto my USB to play on my car radio. The radio reads the music but does not play it in sequence. So it plays certain folders, then it skips folders. in certain folders it skips tracks. apparently there is a specific way to save the music into folders onto the USB with regard to naming the tracks and folders.. I have a Pioneer DEH-2350UBSW. Can anyone please help.

    It is a stick, Cruzer Blade 16gig.
    In the manual it says the following about the USB storage device:
    1. Playable folder hierarchy is up to 8 tiers
    2. Playable folders up to 500
    3. Playable files up to 15 000
    Under sequence of audio files it says that the user cannot assign folder numbers and specify playback sequences with this unit. It also gives an example of a hierarchy:
    01 - folder
    Under that is 02 which is also a folder
    Under that are compressed audio files 01 to 05: folder number
    Under that there is another folder same concept as above - I have attached that part of the manual in this response.
    I named my folder - Folder 001 Artists name and then in that folder I added the tracks as:
    001 Song title
    002 song title
    It played the 1st song in the folder and skipped to the next folder, I can't even locate the other tracks.
    On another folder I saved 31 songs but only 29 played so I am not sure whether there is a limit.
    All I need is an example of how to number and name everything.

  • I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    Chances are you mis-typed a character in the Wifi password and the devices saved that information.  Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection.  Tell your devices to forget the wireless connection and start over.
    Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

  • Output to XDCAM HD - Audio Settings for Final Sequence?

    Hi,
    If the approval gods are smiling, it'll be time to export several programs back to disc for a client in the next week or so. The original clips and the sequence are all at XDCAM HD 1080i60, 35Mbs VBR. I've ingested using Sony PDZ file transfer with a PDW-F75 deck, and everything looks/sounds great on approval QTs so far.
    My question is on the audio settings for the final sequence on to XDCAM disc. I've got 2 tracks of talent audio, 2 of nat sound and 4 of music. If I understand the FCP manual correctly, I have to select 4 mono track outputs when doing a file transfer export of the sequence. What settings do I need to choose so that the mix I hear when I play back my sequence in studio is what anyone down the line will hear when they play back the final sequence I've exported to XDCAM disc? That is, if I've got 8 active tracks, what happens to them with the 4 mono track setting? Thanks very much for any suggestions and advice.
    Pat

    Agree that the HDV downconvert in the camera is optimal.. but the darn print to video needs to work reliably to GET the hdv material back to the camera
    i still have to use iMovie to get my files back to the camera in HDV...
    FCP 5.0.4 still doesnt work well

  • Changes in the RDF are not affecting the report

    Hi All,
    Greetings.
    I have D2K which is working fine from a couple of years. we had encountered an error recently and we have found the cause of it in the formula column of the RDF and made changes accordingly. We are sure that the changes we made in the formula column will resolve the issue.But, the changes are affecting the output.What could be the cause for it?
    The report is called from the form and the RDF is in the report server which is being called on pressing the button. We are sure with the location of the RDF file in the sever path.
    We encountered the same problem with other report which is having the layout problem.
    Do we need to restart the report server every time we made changes to the RDF ?
    Thanks in Advance.
    Regards,
    Bhaskar

    Hi,
    do you seen the changes if you try to build a new report based on th emodified universe?
    Regards,
    Stratos

  • My Video and Audio are not syncing up after importing

    I am trying to edit a few Ipad Clips in premier pro.  My video and audio are not syncing.  They are .mov lower resolution from the ipad.  The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead).  I did not add any affects or change anything.  Please advise?
    Thanks for any help in advance.
    Allison

    Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

  • Annoying Bug ('feature'), requiring video to have audio (or not) to import!!

    There are several occasions where I'm in the middle of a job and I wish to change, say, a video. I have some other video that can directly overlay it. Premiere Pro CS3 (as opposed to older versions) will not let me relink a video in my project to another video unless they both either have audio, or do not.
    Why?
    Why do you care, Adobe, if both videos have audio?
    Why do you care if they both don't?
    I think I can make my own decisions based on if they have audio or not. 99% of the time, I don't use the audio in the clip as it it, so please stop failing my re-linking of a video based on if they both have audio or not. That's for ME to decide if it's "ok" to replace.
    Just remove audio off the timeline if the video I relink to does not have it. Vice versa, do NOT put the audio on the timeline if it DOES have it and my original video did not. This is not difficult, this is expected behavior, and having to re-create videos so they match audio-wise is insanely counterproductive.

    Not true. In fact most of what you describe I was able to achieve. I tested it now and it worked fine. What exactly are you doing to relink a clip?
    I already explained this but, no, it's not working for you, you must be doing something different entirely. Once my machine is done rendering in after effects I'll post a screenshot, but I already explained this. To reproduce this problem the steps are simple:
    1. Import a video with mono audio
    2. Place on timeline in any sequence
    3. Right-click on the video in the Project Library, Make-offline
    4. Right-click on the video in the Project Library, select link the video, choose
    some other video clip with stereo audio, or no audio
    You will get an error that the source video has a mono audio channel and cannot be replaced by a stereo (or no audio) clip. It will fail. Every time.
    Then hold down ALT and replace the audio/video with a track from your bin.
    This is an entirely different thing than what I'm doing. Replace clip is not my solution, and is limited as I posted about earlier.
    This is natural of course. You cannot expect Premiere to match and keep internal In & Out points for clips that have different total durations. Also each clip has a different timecode In Point seperate from it's duration.
    Ahhh.. The good old "assumption" screwing everything up.
    This is not the case, all the time. My
    videos are identical. That is, exact resolution, exact time (down to the frame count), etc. The only difference is in the content in the video itself (text and visuals). They are an
    identical video as far as the computer is concerned,
    only differing in audio. And premiere things this is a good enough reason to refuse relinking.
    And honestly, even if the duration differs, there are better ways of dealing with it than just outright failing. So what if the in and out points are out of range for a clip I'm replacing it with? Just use the 'video offline' effect or create a new visual indicator that the timestamps are invalid for the range, but
    work for the
    valid timestamp ranges. Then I can wholly replace clips easily with other clips to see which I like better, without making me re-create my keyframing effects.
    Again, this is not my problem, I don't like or care to use replace clip. I am trying to RELINK files, which as you said, is a completely different thing. I am not confused, I have been using premiere for as long as anyone else here. This is a valid issue that older Premieres did not care about, and rightly so.

  • Audio Does not export with ideo in quicktime conversion

    I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
    I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
    is there a way i can reset all settings without adjusting my video clips?
    Sound settings
    Format: Lubear OCM
    Channels: Stereo (L R)
    Rate: 48.0000 hHz
    Render Settings:
    Quality: Normal
    Linear PCM Settings:
    Sample Size: 16 bits
    Checked: Little Endian

    Hi(Bonjour)!
    Does the audio play when you run sequence?
    Did you toggle off the monitor icon at the left side of timeline for audio track?
    When export to quicktime conversion, select quicktime movie and click OPTION.
    From this point, you should see a checkbox for SOUND. Be sure to check it ON.
    Michel Boissonneault

  • All-Day-Events Not affecting Availability

    Hi All,
    We have iCal server setup on 10.5.4 and I've come across a bug in the iCal client (3.05).
    If someone has created an event and checked it as All-Day, that event will not affect that users availability if someone else tries to add them as an attendee.
    I have checked the option on for each calendar (Get Info) that "Events Affect Availability". Other events do affect availability, just not events flagged as "All Day".
    Any ideas? Or is it still a bug in 10.5.5 (also happened in 10.5.4)?
    Thanks in advance!

    In the iCalendar data format used to represent the event information, there is a TRANSP property that can indicate whether a specific event contributes to freebusy or not. By default iCal makes timed events appear as busy, and all-day events appear as free (transparent). There is no way in iCal itself to change that. The only workaround when using iCal is to create a timed event that blocks out 24 hours.

  • XPS 8700, audio is not working

    Hi,
    I got this new desktop last month. From the beginning the audio is not working. When I tried installing the drivers from the dell site, I get this error. My system details are:
    XPS 8700 (Mid 2013)
    <private data>
    When I install this:
    Audio_CREATIVE_W7_W8_W81_A00_Setup-241T2_ZPE.exe
    I get the error setup is unable to install.
    When I install this:
    XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.EXE 
    I get this error =
    Vendor Software Return Code: 3
    [04/01/15 10:16:01] logo.png
    [04/01/15 10:16:01] Name of Exit Code: DEP_SOFT_ERROR
    [04/01/15 10:16:01] Exit Code set to: 3 (0x3)
    [04/01/15 10:16:01] Result: FAILURE
    [04/01/15 10:16:09] Open file: C:\ProgramData\Dell\UpdatePackage\Log\XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.txt
    Please tell me what to do

    The audio loaded correctly. Plug speakers or head phones (not wireless head phones) into the rear green audio jack. Then the red arrow should disappear under Sound- Playback Speakers.
    The KM632 USB adapter should be unplugged, then plugged back into a USB port on the rear of the XPS 8700.
    Do that and see if these change.

Maybe you are looking for