Audio channel 1 and 2 to audio left and right??

I am going to dub from betacam machine has audio ch 1 and ch 2 to DV deck that has audio left and right. I am not sure which channel 1 connect to left or right? I am deaf and not usually transfer video with audio. So I can use mini dv so I can log and capture it on FCP. Appreicate your assistance.

Channel 1 is left, channel 2 is right.
-DH

Similar Messages

Delete all audio left or right of cursor: is this possible?

Can I assign a shortcut key function of delete everything to the left (or the right) of the cursor? This would be a nice feature in both views, but Multitrack will suffice. And even then, on just one segment or clip is fine. I'm a Pro Tools user and it has that feature.

You can't quite do it with one key but there are various ways of Selecting to the end of a track quickly and then pressing the Delete button. If you hold down Shift and press the End button (assuming that your keyboard has one, that will select the audio from the Play head to the end of the Track/Session. There are also some new keyboard shortcuts, which may not be assigned, under Edit/Keyboard Shorcuts/Edit which may of use for your type of selection process.

I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
Detlef

You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording.

APE 7 Audio Fill Left, Fill Right

What is the trick to make this effect work. I have a video clip with only one channel. I need it in two channels. I select the clip and apply Audio Fill Right and nothing happens. I also tried Fill Left. How do you apply this effect, please.
BTW Is the top channel on the time line the left or right channel.
Thanks all.
Cheers! Phil

The Fill Right/Fill Left Effect only works when one has a 2-channel source/Track. With 1-channel, there is nothing to Fill.
If your Project has a 2-channel Master, probably the easiest way to get a dual-mono (2-channel from a 1-channel source) is to just duplicate that 1-channel source. It will then go to into the 2-channel Master. If one wants to adjust the separation a bit, that is easily done with the Audio Mixer, and the Balance for each of the two 1-channel, mono Tracks.
Good luck,
Hunt

My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
Basically I just want to turn one-channel audio into two-channel audio.

25424...
Sure you do not want to give the Fill Left and Fill Right another try?
According to the Adobe document Adobe Premiere Elements Help | Effects reference
Fill Left, Fill Right
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
From what you wrote, your Premiere Pro video seems to be saying the same.
If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
Audacity: Free Audio Editor and Recorder
And, then import the Audacity edited audio back into Premiere Elements project as source media.
Is the speaker system OK?
We will be watching for your results.
Thanks for the follow up.
ATR

How to separate left and right audio channels?

I've imported some AVCHD footage that had audio recorded separately to each channel, left and right. When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually. When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels. Any advice?
Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding. I used Free MTS M2TS Converter to do the transcoding. While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip. It offers me "6 mono" but not dual mono. Any advice?
My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually.
Thanks!

Thanks Tom. I recorded 2-channel audio, not 5.1 surround. Six mono was only an option on the MP4 clip. I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently. Even when I mute one track, the audio meter still shows equal left and right levels.

If I have audio coming from left channel. How do I make same audio Left and Right?

Hi there,
I've recorded some footage with a mono mic and it recorded the audio on the left channel of the audio. In FCP. I placed this audio clip as a part of a multi-cam clip but the sound is only coming out the left. Is there a way to set this audio to mono or to make them play the same levels through the left and right channels?
Thanks,
Caleb

Wow! 30 Seconds later, I figured it out. LOL
Under Inspector for audio, you just click on channel configuration, click on channel and use "Dual Mono" mode. Thanks Caleb!

How to divide audio in Left and Right Channel?

Hi there,
I want to divide audiofiles into the left and right channel, but I keep forgetting the shortcut.
Can anyone give me the shortcut again?
Thanks a lot

If you have two audio clips of the same duration, you can select (highlight) both, then hit Option l (lowercase L) to make them a stereo pair. The pan will be set to -1 indicating that channel 1 will be routed to the left output channel and channel 2 will be routed to the right output channel.
-DH

How to set audio instruments to record in left and right channels

I am a new Logic express user. I am using a PreSonus FireWire to in put guitars and mic's. If I use Logic Express to record my guitars from input 1 I only get sound out of the right channel. If I use input 2 I only get sound out of the left channel. If I use the Garage Band tab to input the same instruments plugged into either channels 1 or 2 on my PreSonus I get sound from both the left and right channels together. There must be a simple fix I am missing in Logic. If anyone can help me I would I would appreciate it.

Hi t,
welcome to the forum!
There's nothing wrong with your set-up!
MONO inputs to mono tracks,
from the mono track you can add mono to stereo plug-ins and benefit from that.
In garage band you have a mono input that showing a stereo channel, that's what what I have explain above. In Logic it's a blody waste of HD space (not to say wrong) as you recording a mono file to stereo.
Think bigger and pratical now T, those things make all the sence,
GB is so easy that can confuse us about the real thing because it's hidden from your eyes.
Kindly regards,
Jorge

Left and right audio channels in clips not balanced.

One is louder than the other. How do I make them the same or is it a problem with how it came in? They are in stereo mode but the waveform shows one lower than the other.

Select the clip in the timeline and open the audio tab in the inspector. Under the audio configuration label click the drop down arrow at the right and change stereo to dual mono. Go back to the timeline and right click the clip and select expand audio components. You can them change the volume of the two audios independently. After adjustment right click the clip again and choose collapse audio components.

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Route audio left channel to mono master

Our videographer records all audio to the left channel only, which leaves the right channel empty. Is there any way to route only the left channel to both the left and right master, or to route only the left channel to a mono output?

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Audio channel 1 and 2 to audio left and right??

Similar Messages

Maybe you are looking for