Audio channel 1 clips are the same.

My questions is in Channel 1 all the clips are locked at the same level, so when I adjust one clip they all move. I just turned on the program today and noticed that happened. I don't know what I did. Channel 2 is fine. I'm new to Premiere so any help would be great. 
Thanks Ralph

Ralph,
The OP (Original Poster) has two options, with regard to points. They can award up to 4x the 5pt. "Helpful Answer" (up from 2x fairly recently), and then can award the "Big 10" points for "Correct Answer." That equates to a total of 30pts per post, however, the OP can only give one award, per Reply, so you could give Stephen the Big 10 for a Correct Answer, and then 5pts. each for each of his "Helpful Answers."
One can also mark a question as "Answered," without any points being awarded, and the thread will be marked as "Answered." One can also award up to 4x 5pts per Reply, for "Helpful Answers."
Those points go into the poster's Profile. Note: Stephen is joking about the "use" of the points, as few, if any of us know what those points translate into. We used to speculate that at some point, Adobe would award a free lunch at the Official Adobe Cafeteria (Friday is Maine Lobster Day), and 5 mins. with the Product Manager of one's choice for some one-on-one "face time." That, however, was just pure speculation, but fun, none the less.
Most of all, we try to just help posters with problems, and let the points fall, where they might. It is useful, though, to mark a solved question as "Answered," so that future readers will know that the OP did get a useful answer.
Good luck,,
Hunt
PS - Also, the OP can mark their own Replies as Helpful, or Correct, but those points do NOT appear in the OP's Profile - or I'd be asking a ton of questions, and then padding my "account" with my own points...

Similar Messages

  • Unrendered Audio - sequence and clip settings are the same

    When I drag a clip to the timeline a redline appears on the top of the timeline. I know this means that there is a setting issue between the sequence and the clips. All the settings are the same with the exception of the:
    audio format - Clip: 8 bit integer
    Seq: 32 Bit Floating
    Audio Rate - Clip: 48000 5kh
    Seq: 48.0 KH
    The clips which is 1 1/2 HR takes 6 minutes to render.
    Does anyone know why I need to render this clip?
    Macbook Pro   Mac OS X (10.4.8)  

    Here: a foolproof way to ensure clip-sequence settings match up:
    http://web.mac.com/steelepro/iWeb/steelecuts.com/fcs%20detective/6FD1D5FD-0C56-4 F06-992C-902D00556549.html
    And if you still have the problem, why not convert it to AIFF via QT?

  • How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    Tom Wolsky wrote:
    The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
    You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
    Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
    I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

  • Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

    Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
    thanks everyone

    BaconHouseVidz wrote:
    … at the same time…
    in hope to speed things up?
    no, no effect.

  • Can you avoid multiple clips of the same media in a project

    We have 2 suites and we sometimes work together on a common project utilising the same media.
    If I want to use a sequence from the other suite I can easily import it.
    The problem:  it creates another folder with clips that only belong to the imported sequence.
    The end result after a few imported sequences is that my final timeline has instances in it that
    are from clips belonging to several different folders or bins even though the media is the same.
    In summary... is there a way you can avoid having multiple clips of the same media in a project.
    Makes for a very messy project when you have finished.
    You've got multiple clips with the same name scattered everywhere.
    Cheers

    Not yet.
    I'm kind of hoping this type of media management will be vastly improved in CS6, whose main new 'feature' reeeeeally needs to be outstanding network collaboration with other editors working on the same project.

  • Different zoom levels for different clips in the same project?

    Hi
    I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
    kind regards
    Soren

    You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
    Using Motion or Scale to Frame Size commands
    Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

  • Work on more clips at the same time (premiere elements 11)

    Question: is het possible to change the colour / ad the tool videostabilisation on 2 or more clips at the same time?

    Gentlemen,
    I will try to explain what happened to me when I tried to paste effects.
    I copied the keyframe effects from the first clip, (selected the clip, right click, copy)  Then selected the target clip and didn't pay attention to the postion of the timeline indicator which was about 1/3 of the way into it.
    Subsequently, when I then selected "paste effects and adjustments" to this target clip, it did so, but the effects then began at that point where the timeline indicator was at.
    So for a timing eg:  Say the both clips are 10 seconds long with all the effects at the beginning within the first 5 seconds.
    The indicatior was at about the 4 second mark in the target clip when pasting and that's where the 5 seconds of effects from the first clip started.  (about 4 seconds in)
    Since I didn't know about the shift key technique, I just discovered that moving the timeline indicator to the beginning of the target clip (first frame) and re-do the procedure, it resulted in the correct position and timing etc.

  • How do I layer 2 video clips in the same time space/ playing side by side at the same time

    I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

    aggro
    What version of Premiere Elements are you using and on what computer operating system is it running?
    This sounds like a split screen effect to me.
    If so, one view on Video 1 and the other directly above that is the other view on Video 2.
    Then crop each so that each occupies 1/2 the Edit area monitor screen.
    (generalized since I do not know your program version, see effects Transform/Crop).
    I wrote the following in 2011 for a Premiere Elements 8 user in another forum
    Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
    Video ONE on video track 1.
    Video TWO on video track 2, directly above Video ONE.
    Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
    Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
    Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
    You may or may not need the "flip" part of the effect.
    Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
    Thanks.
    ATR

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • Time Lapse - How to shorten hundreds of clips at the same time

    Hi there, i have recently purchased a Gopro camera and have recorded a number of high definition picturtes that i want to stick together and put in a video, however there are about 600 images in total in the timeline, all i want to do, is because they are just images , i want to have each picture (or clip) exactly the same length. Its obviously going to take ages if i try and shorten each clip individually. Also, how do i resize the clips en masse, as they all looked somewhat zoomed in compared to the source file.
    Thanks in advance
    Nick

    Stephen already answered this:
    "Resize one clip the way you want it, copy the clip on the timeline, select all of the other clips that you want affected, right click and choose paste attributes."
    Basicaly you do resize 1 frame (1 clip) to 27.7%
    - select it
    - cmd+C
    -cmd+Alt+V (or right clic Paste Attributes)
    enjoy!

  • Query database fields are the same character but not in the same order

    Hello Oracle WIZ !
    I have a simple question regarding perhaps a function.
    I have a columns in a database with data the could have been transpose meaning the keyer might have entered. 1234 and someone else could have come in and put 2134.
    the characters are the same but the numbers are in a different order. Is there any function that would allow me to query just based on characters? hence bringing back the 1234 and 2134 rows?
    Hope this makes sense
    Thanks
    all

    Hi,
    You can use CONNECT BY to re-arrange the characters in a string in ascending order, then use that value to compare strings.
    For example, in the following sample data:
    CREATE TABLE     table_x
    AS
    SELECT     1 AS id,     '1234' AS txt     FROM dual     UNION ALL
    SELECT     2,          '4231'          FROM dual     UNION ALL
    SELECT     3,          '433'          FROM dual     UNION ALL
    SELECT     4,          '343'          FROM dual     UNION ALL
    SELECT     5,          '431'          FROM dual     UNION ALL
    SELECT     9,          NULL          FROM dual
    ;ids 1 and 2 both have txt consisting of '1', '2', '3' and '4'.
    ids 4 and 5 both have txt consisting of '3', '3' and '4'.
    There are no other matches.
    This query finds those pairs:
    WITH     cntr     AS
         SELECT     LEVEL     AS n
         FROM     dual
         CONNECT BY     LEVEL <= ( SELECT  MAX (LENGTH (txt))
                           FROM        table_x
    ,     got_ordered_txt     AS
         SELECT     x.id
         ,     x.txt
         ,     MIN (SYS_CONNECT_BY_PATH (SUBSTR (x.txt, c.n, 1), ','))     AS ordered_txt
         FROM     table_x     x
         JOIN     cntr     c     ON     c.n     <= LENGTH (x.txt)
         WHERE     LEVEL     = LENGTH (x.txt)
         CONNECT BY NOCYCLE     x.id     = PRIOR x.id
              AND          c.n     != PRIOR c.n
         GROUP BY     x.id
         ,          x.txt
    SELECT     a.id
    ,     a.txt
    ,     b.txt
    ,     b.id
    FROM     got_ordered_txt     a
    JOIN     got_ordered_txt     b     ON     a.id          < b.id
                        AND     a.ordered_txt     = b.ordered_txt
    ;Output:
    .       ID TXT  TXT          ID                                                
             3 433  343           4                                                
             1 1234 4231          2                                                

  • How do i get my contacts to sync so they are the same on my computer, Iphone and Icloud?

    from over the years I had a lot of information in my address book that was not relevent anymore, was incorrect or incomplete or a dupluicate. I went through all of them on my mac computer and updated all of the information. As soon as I pluged my iphone in to sync it I ended up with more duplicates, some contacts on my phone not on my computer and vise versa. I checked Icloud to make sure that one was ok but it is different from both my computer and my phone. Now I have 3 different versions of my contacts. How do I sync all three so they are the same so I can start cleaning it up again? Does i matter where I make the changes (phone, computer or cloud)? After I clean everthing up again how do I make sure that the most current and correct contacts are in all three places?  Please help it making me a bit crazy at the moment.

    That's  your problem. You must have 10.7.5 or later installed to have iCloud. Upgrade your computer:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • My iphone / mac no longer recognize they are the same Itunes library.  When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library.  I have purchased items on the phone I don't want to erase

    My iphone / mac no longer recognize they are the same Itunes library.  When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library.  I have purchased items on the phone I don't want to erase them from the phone.  The phone backs up fine, but won't sync. 

    File>Devices>Transfer Purchases from "iPhone" and then sync.

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • HT204053 I changed my apple ID. What can I do to change the icloud ID also so that they are the same.

    I changed my Apple ID. What can I do to change my icloud ID also so that they are the same.

    If you used the "Manage your Apple ID" login at https://appleid.apple.com to simply change your primary email address of your existing AppleID, then all you need do is log out of iCloud and then log back in with the new email.  If on an iOS device, go to settings, delete the iCloud account, and then log back into it with the new email address.
    If you actually created a wholly new AppleID, then you cannot change that for your existing iCloud address.  You can make a new iCloud account with the new AppleID.  But your current iCloud login would continue to use the same AppleID as its login.

Maybe you are looking for