Audio Channels. Only one channel is playing

For some reason only one channel is playing a signal on a couple of clips. The other clips are fine.
All I did to the clips in question was increase the DB levels.
How can I adjust it so that I get signals on both audio channels?
Thanks

duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

Similar Messages

  • What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time?

    What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time? I changed the password but soon discovered it didn't help. I want to play Clash of clans but every so often the person comes back on. is there a way for Game Center to log off all the accounts, so the hacker will be gone?
    Please help me with this problem

    Your iPad can be hacked only if it's been jailbroken.  Has it?

  • My Ipod is 5-6 years old.  Suddenly, I'm getting audio through only one ear bud.  Is this a common occurrence?  And does this just mean I need to replace them?

    My Ipod touch is 5-6 years old.  Suddenly, I'm receiving audio through only one ear bud.   Is this a common occurrence?  And does this just mean I need to replace them? 

    It's fairly common for headphones after extensive use (5+ years).  If you have another set of headphones (any type with same connector), try it with the iPod to determine if the fault is on the headphones or on the iPod.  Or you can try the same headphones with another device, to see if they are working fine or you get the same audio problem.

  • Please Help - Audio Exporting-Only one channel

    When I export the audio from Final Cut, I get only one channel of audio ( right side). This happens with all the AC3 and PCM audio settings.
    All of the settings are correct in Final Cut. I have dual output audio on the meters and playback. I've also done a complete troubleshooting check on my playback system to make sure that everything is working properly. It is. I tunes plays everything back in stereo as does final Cut.
    Any suggestions? I'm really behing the 8ball at this point.
    Thanks,
    Bigsul
    g5   Mac OS X (10.4.7)  

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Exported Audio Voiceover Only One Channel

    I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
    Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
    Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
    So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
    Export and only one channel.
    When I monitor in FCP X I heare the audio out of both channels.
    When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
    Killing me.
    So I I loaded the H.264 exported clip into QuickTime Pro 7
    Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
    So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
    But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Only one iTunes song plays during DVD slideshow

    I have built a slideshow in iDVD6 that's about fifteen minutes long. I added four purchased iTunes tracks, grouped in a playlist, into the audio well in iDVD. The Project Info shows the four tracks.
    Only one track plays, however, on the burned DVDs. It repeats itself several times until the slideshow is finished.
    In reading other posts about audio, I've noticed that too little available space on the drive with the project can sometimes make iDVD a bit wonky.
    I have about 15 gigs available - could that be causing this problem?

    15GB should be sufficient, although more always is better.
    On the chance that some preference or permission is corrupted, try the following standard stuff that we do when an iLife program is acting weird: Close iDVD and trash the file com.apple.iDVD.plist found in User/Library/Preferences. Then do a permissions repair using the Disk Utility app on your Mac.
    If that doesn't solve it, as a workaround you could try joining the songs in your playlist into one total soundtrack. You could do this by putting your playlist into an iMovie project and then exporting your playlist onto your desk top as an aiff file. (File/Export/Expert Settings/Share/Sound to aiff) Then import that file directly into your iDVD project, or into iTunes and from there into your iDVD project.
    Another way is to export your playlist to a musical CD, and then import all the songs at once from the CD back into iTunes, checking the "Join CD tracks" option on the iTunes Advanced menu. That will join all the tracks into one long clip.
    Perhaps someone else will come up with a better suggestion. Good luck with this.

  • When I plug in headphones or use audio jack only one speaker works.

    I have an iphone 4g.  When I plug in headphones only one side works.  When I plug into my car audio jack...only one car speaker works. 

    There is only one speaker, the other side is the microphone.

  • When I choose an album to play in my itunes library, only one song will play and then itunes stops. Also, when I click on next, itunes just stops playing.

    When I choose an album to play in my itunes library, only one song plays and then itunes stops. Also, when I click on the next button, itunes stops. How can I play an entire album through without stopping after each song?

    Sounds like you have accidentally unchecked all items. In the Songs view ctrl-click on any empty checkbox.
    tt2

  • HT3775 I have a webpage where I embeded more than 2 quicktime players. I want that at a time , only one player is played. When second player is played the first one should stop. I am using simple EMBED / OBJECT tags to embed the player.

    I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.

    I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.

  • Difficulty with SF2 files containing multiple sounds; only one sound will play

    Here's my difficulty. I know exactly how to install SF2 soundfonts on my computer, I have used them in several compositions, but there's one limitation I havent been able to overcome.
    Some soundfonts, as you probably know, contain multiple sounds. My problem is that when I have a multi-sound SF2 selected, I can only get GarageBand to play one sound -- presumably the first one in the pack. There are no options in the DLS Music Player window for selecting other sounds within the soundfont; only the soundfont itself is listed. I have a couple of soundfont packs where the different sounds are all split into individual SF2s within a folder, and that displays as a submenu properly... but I can't get these others to work properly. Any ideas?

    I don't think you can get it to work with the current version of GB. There used to be a plugin called SoundFontSynth that handled soundfonts with sound banks, but it has been discontinued and the auther never replied to emails.

  • Audio Out only one channel

    There was a previous topic on just this issue but it was archived and I did not see any resolution. I am having the exact same problem with my computer. Sound only comes out of the left internal speaker, and only comes out of the left speaker when plugged in to headphones, external speakers, etc.
    Does anybody know what the problem is? Thanks!

    Wow, I feel like an idiot. Is there any reason why this would randomly happened because I certainly never changed the balance. Although, I do share my computer with my fiancee now, and nothing is out of the realm of possibility when she uses it...

  • Front and Rear Audio Through only one Socket - Sound Blaster Live! 24

    <p class="MsoNormal">PLEASE HELP ?
    <p class="MsoNormal">I'm getting Front and Rear Audio through the front speakers (Front Socket), and nothing out of the back.
    All cables are set up correctly; I have reinstalled drivers, updated drivers etc. and the software.
    What?s going on ? :S

    I'll answer you here, as I believe it may be helpful to other users as well... You will need to download the latest drivers for Li've! 24-bit under Vista, which are available [url="http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+Vista+32-bit&region=&Product_Name=Li've%2+24-bit&Product_ID=035&modelnumber=&driverlang=033&OS= 26&drivertype=0&x=29&y=0">here[/url]. These add AudioConsole, which allows you to select CMSS options for your soundcard.
    amm44 wrote:
    On Windows XP this was never the case, for surround sound I would leave it in Dolby mode.
    This is indeed strange... In ProLogic mode, as I already said, it'sproduces?surround sound from the 2 front channels but this is not the same as discrete sound, which is eventually 6-channel analog or Dolby Digital. It really all depends on the content you are playing. Also note, that a lot of the Dolby movies available on the web, may use AC-3 format, but may still be stereo only. On this content ProLogig will produce nice surround sound. (Media Player Classic states clearly how many channels are actually available)?If you however playback a true 6-channel AC-3 movie and you have ProLogic enabled, you will most probably not hear any dialogue, or just its echoe... (Assuming that you leave the AC-3 decoding to happen on the soundcard, which will then send the signal through the 6 analog channels)?How is your soundcard connected to the receiver? SPDIF/Optical or only analog??

  • Only one song is played at time

    My 80GB iPC only plays one song at a time then it resets by showing the Apple Logo Screen and then to the Main Menu. This happens when I try to listen to a playist, album, etc. Sometimes I can skip to the next song and sometimes when i try to skip, it will reset again. What's going on?

    Anybody else with the same issue?

  • Audio in only one speaker

    What did I do now?
    I finished the video, uploaded it to youtube and my friend says it's only audible in one speaker (I hadn't noticed but after he mentioned it I realized he was right).
    A few days ago I had been screwing around with the audio for the video... but I have no idea what I did. Any guesses on how to fix it?

    Sorry, I'll try to explain it the best I can.
    I had been trying to delete the audio in the clips (because it's a music video so I had the recorded track that I wanted for the audio) and the audio for the clips weren't showing up in the timeline but I HEARD them so I might have done something to the audio mixer... (later the audio tracks did show up on the timeline but I have no idea how or why.)
    Right now when I view a clip in the viewer and open the audio mixer, the bar is all the way down at -96.... is that normal? I know I screwed around with controls like that but the ones I worked with had meters all across the pop up window, not just the "master" one on the side like what I'm seeing when I open the audio mixer right now.

  • On Export, getting audio but only one still frame of video

    I am trying to export a .mov file to a QT file to reduce overall size, and each time I do the export, I get all of the audio fine, but the video is just a still picture of the first frame. Does anyone have any idea what I am doing wrong? I've tried tinkering with the export settings, but nothing seems to work.
    Powerbook G4   Mac OS X (10.4.9)   QT Pro 7.1.6

    You, like the OP whose thread this is, fail to say
    what the source video info is or if it even plays
    before trying to reprocess it to H264.
    oh! Sorry for not informing about the source video. The source video was a QuickTime video compressed with H.264 and audio with AAC.
    Interesting settings- why is the output so tiny?
    160X120 is pretty small.
    I was encoding this to put it as an inset video.
    BTW, I could encode it with Movie to MPEG-4 settings.
    20" iMac   Mac OS X (10.4.7)   2 GHz Intel Core Duo, 1.5 GB DDR2 SDRAM

  • Only one angle is playing in multi clip sent back to FCP from Color

    2 camera Multiclip edited and rendered in FCP 6, sent to color, played ok after color adjustment.
    Rendered in color, and sent back to FCP; second angle in the clip is blank (black).
    tried different settings in color prior to sending, same result.
    The multi clip plays ok in FCP prior to sending to color, and plays ok in color prior to sending to FCP.
    Any idea what is being missed here to make second camera show?

    The fix you can try is to Media Manage the project exporting the active Multiclip selection as independent. With that, you might even be able to create a new COLOR prj and import color corrections, so not much repeated labour.
    jPo

Maybe you are looking for