Audio clips between moving menus

I have created a disc with moving menus from after effects and when the transition takes place, there is an audio clip. Is there any way of reducing this or even eliminating it all together?
I have checked other retail discs and some do have it, others don't

Soundbooth, Audition, Premiere, to name just a few of your options.

Similar Messages

Continuous audio clips between slides

how do you make the same song play for 2-3 slides? i know you can add a song to the entire presentation but i want to have that specific clip for only 3 slides. Also, is there a way to make a smooth transition (ie: sound fading out and into the next sound clip with each slide change) between slides and different songs??

Greetings and welcome to the Forum.
The only way to accomplish what you want (within Keynote) is to create a new audio track from your audio "clips" off-line (for example in Garage Band) cross-fading between them.
Next, create a "sub-set" presentation, containing only the slides that will be associated with this audio track.
Then, import this track as a Soundtrack for the "sub-set" presentation.
Now, Record the Builds and Transitions for each slide in sync with the audio track.
Finally, link each of these "sub-set" presentations together via Hyperlinks.
Yes, it is cumbersome, but the ability to deal with audio is severely limited in Keynote.
You also can use other off-line programs to create audio-with-visual segments and then import these into Keynote. But that's a whole other story ...
Good luck.

Video and audio clips not moving together on timeline

So every time I move my video clips in the timeline, the audio clips are not following.
I know "make a stereo pair" links up the audios, but is there any way to make the video and both the appropriate audio tracks move together?
Thanks
D

Link them - select the video and audio tracks and press ⌘L.
Patrick

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

No.
OT

Video audio enabled clips not moving together

I am dragging clips on to the timeline. They have audio and video. the dialogue box says they are enabled. However, If I move the clip, audio and video are not moving together when I drag either the video or audio clip in the timeline. Even when I disable the clip, link them or group the audio and video, they do not move together

Link them - select the video and audio tracks and press ⌘L.
Patrick

Audible Click Between Audio Clips

Running PP 5.5. Editing an AVCHD project with seperately-recorded WAV audio files. Dropping the various audio clips of the various scenes into the timeline and I keep getting clicks between the audio clips upon playback and export. There are no empty frames between the clips, nor any overlapping clips. Even looping a single audio clip in Audition results in a click at the beginning of each clip. In either PP or Audition the clicks are only audible when playing normal speed. Scrub through the timeline with the arrow keys and the clicks are not present.
Ramping up/down the gain at the head/tail of the files still results in clicks between the clips. Doesn't matter if the clips are in the same track. It seems to be a file access issue and not an actual audio track sound, except that when I export the movie the clicks become part of the audio track of the exported movie. Except for these audio clicks everything is working perfectly.
I just upgraded from PP CS4. Opening up a copy of this project in PP CS4 and I have no audio clicks.
I'm stumped...
Any ideas?
Thanks in advance.
I have a very fast computer:
i7 - 980x
24GB RAM
Dual SSD HDD's in raid 0 for OS
Quad 2TB 7200RPM HDD's in raid 0 for files
Dual GTX 460 Fermi Video Cards
PP 5.5 (5.2) Legit
W7P x64

Audio is encoded in samples per second (e.g. 48000) and video is played back in frames per second (e.g. 24). There are significantly more audio samples than there are individual video frames and Premiere cuts to the nearest video frame, so there may be instances where the cut point occurs in the middle of a very short sound that you would have barely noticed in the full-length recording.
This is a problem I have experienced in all NLEs; it is not just limited to Premiere. The easiest way of solving it is to add a short cross-fade at the beginning of the audio clip.

Moving clips between events

In the FCPX manual, it states that you can move clips between events by just clicking and dragging a clip from one event to another. It also says that doing the same thing with the option key down will copy clips to the other event.
However, I've noticed that dragging a clip to another event just makes a copy of the clip. It's kinda annoying. Any workaround?

I'm seeing odd behaviour with this too.
Imported a tape which contained 3 separate days footage of different activities.
These were imported to my Movies folder in Home directory.
I created 2 new events and tried moving the content as per manual instructions for content on same drive but I only ended up with copies or a freeze due to a non-updating background activity (the file transfer).
Ended up with multiple copies of the same clips in different events on the same drive, some events listing the clips several times but only a single physical clip when viewed in Finder.
I managed to move a single clip successfully but for the life of me not sure why that worked - maybe because it was a single clip not a group?
This is very disconcerting behaviour when you're trying to organise content.
AC

IMovie moving audio clips when transitions are added

iMovie moving audio clips when transitions are addedI have some video clips that need simple fades to black added at the end. However, whenever I add the fade out transition, iMovie does something insane. Instead of the last two seconds of video fading to black and the last two seconds of audio fading out, it seems that a random two seconds of audio from elsewhere in the clip is tacked onto the end and faded. This problem is nuts and I am having no luck finding a solution. Does anyone have one? This has happened with other transitions, but I’d settle for just getting a fade to black to work properly. Is this only a problem with Intel machines?

The problem that you describe has come up frequently on this forum. There are lots of things people have tried, but no solution has been found, other than the workaround of extracting the audio, as Klaus 1 mentions, and manually adjusting the fade out. Some feel that it is an intel machine problem, but that is not clear.
For more information on this issue, try using the search function of this forum, typing in "audio echo with transitions", or some other appropriate search words. You might find of interest the information contained in the following post:
http://discussions.apple.com/message.jspa?messageID=5681815

How to SIMPLY add audio crossfade between two clips ?

Tried to make a simple cut edit for tv news.
How to add an audio crossfade between two clips to soften transition ?
Detach audio, then create audio only scenario, then add transition ? Unusable.
When importing 8 tracks from Xdcam HD, how do you choose wich audio track to add your transition to ?
Also, impossible to re-export to Xdcam disk on the field.
This piece of software is simply unusable in real life pro conditions. Some very nice features, globally a disaster.

First thank you all for taking time to reply.
I found these solutions myself but for me these are only workaround.
In Fcp7, you just had to drag and drop dissolve transition to clips junctions TO AUDIO TRACK ONLY. Very quick and simple. In Fcpx, it is very time consuming if you want to add audio crossfade to every clip junction in a full project. That's really not a software evolution in my opinion...
I think "easy transitions to audio tracks only" has to be implemented in next version.
Thanks again !

Moving Video & Audio Clips on Timeline

How can I move all video and audio clips on the timeline together? I can select and move all video clips, or all audio clips, but I can't find a way to move everything together. Moving separately will put audio and video out of sync.
Thanks.

Lock the audio to the Playhead first (Advanced menu).
But you should be able to select both video and audio clips together using the usual shift key.

Audio clips change when moved from sequence to sequence in FCP7

Working on a documentary piece within FCP7 and am having problems with moving audio from one sequence to another. Both sequences have the same settings, but when I copy the audio clip and paste it into the new sequence, the audio that pastes is from the same clip but is not what I copied. Does anyone know why this is happening and/or how to fix this?

Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
x

Moving Audio Clip less then 1 frame in Premiere

Is it possible to move an audio clip less then one frame in premiere CS4. I recorded and then remixed in Audition 3. Live concert was also recorded in HDV on a Canon hv30. I want to use the remixed audio with the video footage in place of the camera audio. It was recorded hdv 30P so one frame is a significant amount of time from the audios point of view. The audio and video are about half a frame apart. The only thing I can think of is take the audio back into audition and shorten the lead in by the required amount. I was hoping for a easier way.
Any thoughts would be greatly appreciated.
Ken

Ken,
Glad that it did work for you. Now, there are still some frame-specific things that can and cannot be done, as PrPro is frame-based, but for your need, it sounded like a good solution.
Thanks for reporting success,
Hunt
PS so you can mark your question as having been answered, right?

Moving clips between projects, without rendering them

Is this possible? I work on a Macbook Pro, using CS4 production premium. How can I move clips between projects in PP CS4?
I KNOW there's a way. Just can't figure it out.
Thanks!

The easiest, IMO, is to Open your source Project and remove everything that will not be needed. Do a Save_As. Import that Save_As Project into your new one. Be sure to then twirl open the Bins, and Dbl-click on the Save_As Project's Timeline.
Hunt
PS I also go to Project and choose Delete Unused (or similar syntax) to clean things up for the Save_As.
Message was edited by: the_wine_snob Added PS

Menus shorten audio clip

I have many shorter music clips that I have recorded (using WireTap Pro) from my iTunes music, whenever I need part of a song, or just the first few seconds of the beginning.
I can drop these into my iMovies (using v 6.0.4) without problem.
If I want to use these as menu audio in iDVD, iDVD 08 shortens them. For example, a 35 second clip will be only 6 seconds, no option to lengthen to the length of the clip.
Even when the duration slider will move, the length of the clip does not change.
This was not a problem in iDVD 6, where any audio clip would work.
I tried recording longer clips, and I can get the length of the new clip to be slightly longer....ie. recording 1 1/2 minutes will sometimes get me 25 seconds. This is a bit tedious....any ideas?

The 'save' format choices for WT are AIFF, AAC, MP3 and QuickTime.
Do you think any of the others would make a difference?

Audio clips between moving menus

Similar Messages

Maybe you are looking for