Audio clips change when moved from sequence to sequence in FCP7

Working on a documentary piece within FCP7 and am having problems with moving audio from one sequence to another. Both sequences have the same settings, but when I copy the audio clip and paste it into the new sequence, the audio that pastes is from the same clip but is not what I copied. Does anyone know why this is happening and/or how to fix this?

Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
x

Similar Messages

Appearance of images changes when moving from ACR to PSE11 Editor .. why?

I run Windows 8.1 x64 bit on my new PC and use PSE11 which opens raw files automatically into ACR. Once I've finished editing an image in ACR I then click on 'Open Image' which transfers the part edited file to the PSE11 Editor. Once there I perform a few additional tweaks before cropping, sharpening and saving as a jpeg.
At about the same time as I installed PSE11 onto my new PC I became acutely aware of a change in the appearance of my images as they transferred from ACR to PSE11 Editor. Having performed the basic adjustments in ACR and things are to my liking, the image now opens in PSE11 Editor looking rather washed out by comparison .. less contrast, maybe a little more brightness and a certain degree of reduced colour saturation.
Obviously all images are seen on the same monitor, so any fingers pointing at calibration issues don't count in this instance! I just need to know if there is a fix that will return me to the situation I've always had before, where the part edited ACR image looks the same when it opens in the PSE11 Editor. I have been using PSE in various versions for a number of years and this is the first time that I've experienced this irritating problem.
Help, please!

CanonMan49 a écrit:
Thanks for your reply Michel ...
The colour setting in both Editor and Organiser is: 'Always Optimise Colours for Computer Screens'
I believe this option will select the sRGB colour space by default and that the option 'Always Optimise for Printing' will default the colour space setting to Adobe RGB. Is this so? I only print occasionally (most of my viewing is on the monitor or the TV) but it would be nice to know if the chosen colour space chosen produce this odd effect I'm experiencing (although I sincerely doubt that it's got anything to do with it).
This option will be used by the ACR conversion module to set the colour space of the file imported in the editor. So, you are right, the sRGB colour space is a good choice for you. What's good is that the raw file itself has NO colour space. If you have edited a raw file for sRGB, good. But you can set your editor to 'optimize for print', and you'll get an aRGB version for printing. Worth a try if you have a good printer (mine is an all-in-one with 6 inks and I can see the difference for some subjects).
My camera (EOS 5D MkIII) is always set to sRGB. Is this significant?
No for raw files. That's used only for the in-camera conversion to jpeg. It's a simple tag which is ignored in the ACR conversion process (see above).
The main issue though remains, namely the fact that part edited images look washed out in PSE Editor in spite of looking just fine in ACR a split second earlier, so I'm still looking for a remedy.
Such a difference is often noted when a file with aRGB colour space is seen in a software that believes it's sRGB. Nothing in your worklows seems to explain that.
Do you see a difference when you see the same edited picture in a non colour-managed software? I can't help you more for the moment.

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

When moving from one master block to detail block it must save record.

when moving from master block to detail block it must save record or it will give message like 'save changes '....
when i write it ,but this message will be coming.
But if i save record message will appear two times.
plz Help me.
Thanks & Regards
Venkata.
Message was edited by:
venkata

Hi,
you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
Jose.

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Can you keep your playlist when moving from computer running xp to computer running vista. v

can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

When moving from a list of threads view to a thread would be nice to jump to last thread read.

When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
Sometimes the threads get rather long. Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post.
Seems this could be implemented in javascript without too much problem. Might be a problem of when to get rid of the tracking data.
Robert

This would be a new capability. I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions. However, I am interested in jumping to the first post that I haven't read.
Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread. Lets assume these are divided into three pages with at most 10 items in a page:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z
The software know that I have viewed the first three pages. It doesn't know what post on the pages I have read. The software would need to assume I have read all the available posts on a page.
Now lets assume that 12 more post were added. This results in:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
It would be nice if I could go to aa.
Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same. For the existing capability of going the the last post, I was thinking of Goto Last Post.

Why doesn't iPhone store audio clips that you download from say whatapp like it does with photos and videos?

Why doesn't iPhone store audio clips that you download from say whatapp like it does with pictures and video?

Because you can't add content, to any iPhone, that way. Done by design.

Performance issue when moving from 4.6c to 6.0

Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware.
For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c. We've noticed other SAP area's are taking longer as well. With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer. All leading to more time to do a PGI in 6.0.
Has anyone else noticed this increase in Response time when upgrading to 6.0 ?
Thanks,
David

Hello.
Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
Run the optimizer statistics and see if it get's better.
Regards.
Valter Oliveira.

Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts. Can anyone help to find and restore my contacts?

IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts. Can anyone help find the contacts on my phone and restore them?

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

Insufficient content when cutting from sequence as individual clips

When cutting from one sequence into another, with an in point set on the source sequence and an in and out set on the program sequence, I get a "Insufficient Content for Edit" error.
This occurs when I have the "Insert and overwrite sequences as nests or individual clips" toggle deselected (so as to cut in the individual clips, not a nested sequence). If I select this toggle the edit works, but obviously as a nested sequence, which I do not want.
Is anyone else having this issue?

We are getting nested sequences whenever we try to cut in a sequence that is more than a minute or two long. We can't get it to cut in anything but a nest for longer clips and if the in/out points are in excess of four minutes, Premiere crashes.
Do you get the Image/cache error?
I have contacted Adobe customer service. They kept me on the line for an hour deleting my settings and playing around and never found a solution. So far all we can do is cut in little tiny bits at a time.
I wonder if your problem is similar, how much material are you trying to cut in?

Audio Clip plays when it is supposed to be faded out.

Hey I keep running into this bug and its a fickin nightmare. I am editing 16:9 dvcpro50 23.98 footage, with audio from dats, cds, camera.
I am playing back the timeline with 12 to 14 audio tracks being faded in/out. When the audio clips are at -inf they still PLAY!!!
This only happens when I have a lot of tracks.
I have deleted renders. Still happens. Made new sequences. Still happens.
This is for sure a BUG. Where is Apple's list of bugs so we can all know we are not hearing things.
Using latest, greatest of OS X and FCP. Using AJA IO hardware.
dual 2gig G5 Mac OS X (10.4.4)

I've been having this same problem since upgrading to 5. (I've got a 90 min feature running, w 20 audio tracks) there's a couple of possible fixes i've figured: drop you're real-time audio tracks down to min(2) so you have to render the whole thing... doesn't take too long. then 4 playout, export a quicktime (not self contained) this'll ref the media and seems to ease the load. Also moving overlapping tracks slightly seems to help, though obviously not ideal... the two combined got over most probs. only happened twice after that... which is a. lot. better!
hope that helps,
i'm on 5.0.3 so maybe it's fixed on 0.4? haven't checked whats out...
2GHz G5 Mac OS X (10.4)

Audio quality changes when I drag to timeline

I selected one part of a video, placed it on my timeline and suddenly the audio changed to a terrible quality. The problem is that when I play the same part on the preview it sounds completely normal. I was using the same video(but not the same part) earlier and everything was fine, now every part I try to put on my timeline(I even tested the ones i've already used) gets the audio messed up. I am working with a video of a lesser quality along with an hd one, but I don't know if it has any influence in that, I was using both earlier and i've done it with other project and it was okay but I don't know... Can somebody help?

Is the FCE Sequence matching your imported Clips?
Right click the Sequence icon in the Browser and select Item Properties.
Al

Audio clips change when moved from sequence to sequence in FCP7

Similar Messages

Maybe you are looking for