Audio codec grayed out

I upgraded to the new version of Premiere and now when I export a file I am unable to change the audio codec settings. Am I missing something or why am I no longer able to change the settings?

Wrong forum. This is the hardware forum for hardware related topics.

Similar Messages

QT Pro 7 - trying to export .mpg to .flv - "export audio" option grayed out

I've opened an .mpg video in Quicktime Pro 7 and am trying to export it to Flash video. It exports successfully, but the audio (present in the original .mpg) is missing in the exported .flv file.
Investigating, when I try to export, I've clicked "options", went to the "audio" tab and found that the checkbox for "encode audio" is grayed out and unchecked. The format listed in this grayed-out window is MPEG layer III (MP3) - which I think isn't correct; this video I'm exporting is an MPEG version 1 file, with layer 2 audio.
Help! What can I do to sucessfully export video with audio?

QuickTime has never supported audio export from muxed file formats.
Use MPEG Streamclip (free) to convert your .mpg to other QuickTime formats (it doesn't export to .flv) and then export that new file to Flash.

Extract Audio is grayed out

Hey guys,
I searched for a solution but haven't found one. Hopefully somebody knows what's going on.
I took the selection tool and selected my video/audio1 clips (two short ones) Went to Clip, Audio and then Extract Audio was grayed out.
Audio Grain and Render and Replace were not grayed out, though.
CS5
Windows 7 Enterprise 64 Bit
Not many other programs running. Shouldn't be a RAM issue.
Thanks for any help,
James

Extract Audio is only available when you select a master clip in the Project panel or a bin, not in a sequence.
(Funny; I was just going to link you to the Help document page about Extract Audio, and I saw you posted there Notice what it says in Step #1?)

Audio Pans Grayed Out

Hey everyone,
My audio pans are grayed out, not sure why. I never encountered this problem before and wondering if anyone has any suggestions on how to un-gray them.
Thanks,
Rob

To get audio from my pans I use Calphalon cookware...sorry
I'm not clear on what you're asking about (ie panning from the timeline, panning from the Audio mixer).
What I can suggest though is double clicking the audio track to launch it in the viewer where you will have a great deal of control with your pans.

Audio waveform grayed out

how come some of my audio clips are grayed out in the viewer window? i can adjust only amplitude but cannot create any node points and cannot even see the waveform. other clips in my timeline are fine but about half of my clips are grayed out.

*the timeline shows the waveform fine but how do i edit the levels if i cannot see any waveform in the viewer window?*
Doesn't answer your viewer issue but since you say you can see the waveform in the timeline, you can add keyframes and edit audio there as well.
rh

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Flash Video Encoder - audio options are grayed out

I'm trying to convert some mpg videos to flv and the first
time the audio settings were available - but since I tried to
change the data rate in the audio settings - the choice is now
grayed out to "include the audio"? The videos have audio...ugh, I'm
frustrated. I hope I have explained my situation enough - I'm very
new to working with videos...

If those boxes are grayed out then it's because FME didn't
recognize the codec used, try to convert the mpeg to an avi or mov.

No Audio - A/V Controls grayed out

Video tutorials on my new PaintShop Pro wouldn't play until I downloaded QuickTime Player. They play now but there is no audio. I tried the instructions on the QuickTime Player Help page: "1.choose Window > Show A/V controls 2.Drag a slider to adjust the setting"
I can't drag a slider because everything is grayed out.
My system audio is working fine. I tried restarting the computer. Any other suggestions?

What codec is the file you are trying it on? Are they greyed out for a Apple sample QT movie?
If you don't have Core Image then they don't work at all: http://docs.info.apple.com/article.html?artnum=301589

How do I get my Built-in Mic to work in Audio MIDI setup, grayed out 1

My iMac is over a month old, and the first week I had it I tried to talk on Skype with a friend. My mic wouldn't work, and after making an Apple Care appointment with a local Mac store last weekend, we found out that the iMac DOES hear me, Dictation works with my voice, but for some reason Skype won't pick me up. Another program I sometimes use is Livestream Procaster, and neither pick up audio from me, oddly though they do pick up finger tapping on the desk, which is no further away from the computer than I myself am.
I Googled this issue with Skype and I found this page:
http://community.skype.com/t5/Mac/Apple-IMAC-Internal-Microphone/td-p/305172
It shows a screen capture using Audio MIDI Setup, and I opened mine to make sure everything was in order, but my CH: 1 & 2 are both grayed out, so I can't adjust them at all.
I have a screen capture of my window as well:
And I did check to make sure that my Interal Mic is selected in Skype, Livestream Procaster, and even my iMac's System Preferences. I wonder if it has something to do with this Audio MIDI Setup. I don't actually know, but from searching for solutions, this is the only thing that doesn't seem to match up with suggestions I've found online.
Thanks guys for any help.

I'm talking with a friend, and he says I'm muffled, and he can't understand me but can hear that I'm talking. When I turn on dictation to record what I'm saying he says I come through crystal clear.
The problem is I don't know if this is a Mac issue or a Skype issue. I was going to go to Skype, but when I found that page that I linked to above, that's what lead me to believe it's a Mac issue again because I can't get my Audio MIDI Setup to match the suggestion made by the user in that link.

Audio Capture not available / grayed out

I have a Samsung SC-D263 connected and when I try to capture video in FCE there is no audio. When looking in the settings, the check box for audio capture is grayed out... any ideas?
I managed to find drivers for the camera, but i don't know how to install them...

What audio checkbox are you talking about?
Do you see the video in the capture window? Do the meters move?
http://www.fcpbook.com/Audio3.html

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

Newbie question - Regions grayed out, audio not playing... please help!

Good morning,
I've got a problem that seems like it should have a simple solution, but I don't know enough about Logic to know what the solution is.
I had put together a few tracks and everything was working fine. Now, for some reason, the regions are grayed out and when I hit play, there is no sound and the meters do not register anything. I've checked the levels on the mixer, and I have the proper audio input-output settings in the preferences (I think); the audio just isn't playing.
Note that when I double click the region and go into sample editor mode, the audio plays fine.
Here is a screenshot: http://grab.by/3nMD
Can someone please help?
Thanks so much!
Matt
http://www.lexappeal.org

Hello,
Logic has a number of ways to mute or solo regions, tracks and channels.
Select the two regions (they are selected in the picture) and press the 'M' key on your keyboard. This will unmute them.
There is a very good and easy to follow tutorial for new users I recommend very highly -
http://www.macprovideo.com/tutorial/logic9101
JG

Audio Grayed Out

I can't figure out what the issue is what my audio. I currently have it running through a system via HDMI. I've had it this way for a few months now. Today I came home and my audio wasnt working and it is grayed out.
I option clicked it and selected "internal mic" and that helped as audio is now coming out of the mac mini itself.
I'm just not sure how to fix it so that it will come out of my system again. Any ideas?

Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

WVC54G Audio & email alert Dropdown grayed out

I have not used the camera in a few years. Pulled it out recently and everything was working great. Went to change the area that the camera monitors for motion and both audio/email dropdowns are grayed out. They were there initially while I was getting everything working, and even had a few test emails sent through.
I changed nothing during this time, just accesed the feed via IP Cam Viewer Lite and did final postioning before trying to change alert area.
V2.07, Sep 7, 2004
I rebooted it a few times and stil have the grayed out dropdowns.
Also, where is the download for the recorder/viewer utility?

Ok, I got a repsonse back from the programmer of IP Cam and he said choose either viewing on the cam or on the phone. Pick one or they other as both won't work.
Does anyone have a recommendation for any other Android apps to use with this camera?
Here is a thread on the IP Cam message boards with a few others having the same issues:
http://hit-mob.com/forums/viewtopic.php?f=7&t=595&p=2044&hilit=linksys#p2044

"Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated.

I have one big wav file of segued tracks as a mixdown and inserted CD markers where I want marked tracks. "Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated. Why can't I export these marked portions as separate files?

the markers durations need to be configured, there is an easy way to do this using your existing markers. click the start time of marker 2, this should change to edit mode to type in a new number, just copy the numbers cmd/ctrl+c. then click the end time of marker 1 and paste, cmd/ctrl+v. now repeat for the rest of the markers, and on the last one enter a value for the end time or click and drag on the duration to manually extend it. once all the markers have a duration, the button should be active to export.

Audio codec grayed out

Similar Messages

Maybe you are looking for