Audio Configuration error after installing iTunes 7.1.1

STEPS:
1. Launch previous version of iTunes, verify application opens.
2. Agree to upgrade to latest version of iTunes.
3. After installation, restart PC and launch application.
EXPECTED RESULT:
iTunes 7.1.1 launches
ACTUAL RESULT:
iTunes does not launch; error "iTunes cannot be run because it has detected a problem with your audio configuration" is generated.
NOTES:
I changed nothing between when I last launched iTunes and when I upgraded to the new version. This error message is quite vague - does anyone have any clue what it means? Thanks.

that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Similar Messages

Audio sounds horrible after installing iTunes vers 10.5. How do I restore the audio quality?

How do I restore audio quality after installing iTunes version 10.5? The audio is high-pitched and metallic.

I wish i knew, no feedback or help forthcoming from apple yet

Svchost.exe errors after installing iTunes 7.0.1.8

I have two computers that starting throwing svchost.exe errors immediately after installing iTunes 7. First it happened on my desktop. In preparation to reinstall Windows XP on my desktop, I prepared my laptop to use while my desktop was out of commision. I installed iTunes 7 and immediately I started getting svchost.exe errors. I don't have the blaster worm on either machine (already checked). My desktop is behind three firewals, runs Norton, and I already did a full virus scan on both.
This is causing significant problems as my computer can't see the network, outlook can wig out, and in general my machine is unpredicatable. I hate to think that installing iTunes 7.0 leads to the need to reinstall Windows. If anyone has any ideas I would appreciate any help.

I changed my "Startup Type" for "Terminal Services" from "Disabled" to "Manual". Resolved issue.
http://docs.info.apple.com/article.html?artnum=304434
Windows XP Pro

Windows error after installing itunes 8.0.2.20.

I' ve a problem after installing Itunes 8.0.2.20.
When i try to use Itunes i get the message windows with a log and use of itunes is broken.

Might have been a bad cable. I reinstalled. Got a crash again. Tried a different cable. It worked.

DEP error after installing itunes 10.5

I have updated my laptop running Windows XP Home Edition with all the latest Microsoft updates and then updated itunes to 10.5 so that I could update my ipad 2 to ios5. After updating itunes, I cannot open the software. It gives me the data execution prevention box saying that itunes cannot be opened. I click on the details and it gives me event type: BEX for itunes.exe. I have researched everywhere on the web and tried everything suggested and still get the same error. I have now uninstalled itunes 10.5 and found an old itunes 9.4 that I installed. I get an error opening saying that some windows components are not compatible and run the appleitunes.bat file to register dlls. That didn't help. I am at my wits' end!!!! What is causing this error? If I completely turn off DEP, I get an error that the progam cannot be opened and each time it gives me a different dll file in the details. Does anyone at Apple or other know a fix for this?

Same problem here!

Getting a side by side configuration error after installing obiee 10.1.3.4.

Hi, I have installed obiee 10.1.3.4.2 version over my windows 7 desktop. After installation, when tried with opening the admin tool, i'm getting a side by side configuration error. Please help what to do to overcome this

Go through the Doc id 1067138.1 at Metalink below is the extract.
The following procedure must be done by a UNIX administrator or by an Oracle BI Administrator with sufficient privileges.
To download Oracle BI installation files under UNIX:
   1. Log in as the user who is to run the Oracle BI processes.
   2. Insert the Oracle Business Intelligence infrastructure installation DVD.
   3. Change to the directory where the installation DVD is mounted (or change directory to the downloaded software).
   4. Download the Oracle BI files by using FTP to copy them to the desired server and directory.
      Note: Make sure to FTP all the files in binary mode, including license.xml.
   5. After the files are downloaded, check that the files in the top level directory, such as setup.sh, have execute permissions.
      execute the command: ls -la or ls -ltr
      Confirm that the files have permissions resembling these:
      -rwxr-xr-x 1 oracle dba 6395 Aug 9 22:11 license.xml
      -rwxr-xr-x 1 oracle dba 657328 Aug 9 22:10 Solaris.bin
      -rw-r--r-- 1 oracle dba 12 Aug 9 22:04 media.inf
      drwxr-xr-x 3 oracle dba 4096 Aug 9 22:11 script
      -rw-r--r-- 1 oracle dba 501194022 Aug 9 22:10 setup.jar
      -r-xr-xr-x 1 oracle dba 1311 Aug 9 22:11 setup.sh
      -rw-r--r-- 1 oracle dba 104 Aug 9 22:04 version.txt(Mark the asnwer as helpful of Correct if it is )
Cheers

Audio Configuration Error when Opening itunes

I installed the latest version of iTunes onto my PC a few days ago, and just tried to open it tonight. Everytime I try and open iTunes (via shortcuts or the direct icon in the Programs folder), a message pops up, telling me that "iTunes cannot run because it has detected a problem with your audio configuration." I checked through the FAQs and troubleshooting and came up empty-handed. Anyone know how to fix this problem? Thanks in advance!

Read this and follow the steps:
http://docs.info.apple.com/article.html?artnum=304424
Rachyl

Error after install iTunes setup: Apple application Support was not found

Hello,
I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
Apple Application Support was not found
Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
Anyone please has some advice?
Thanks in advance!
Marieke

When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now?

Apple pls fix this - MS Visual C++ Runtime error after installing itune 9.1

Ever since I upgraded itune to the latest version 9.1, I kept getting the error messasge below when I start up the computer. Tried restoring system to a previous date, and uninstalling & installing itune a couple times to no avail. Any idea what's going on and how to fix this? I had to remove itune to be able to use my computer (ugh). The irony is that the itune upgrade was mainly to enable ipad. Now that I have my ipad I can't use itune.
The error message reads:
'MS Visual C++ Runtime Error' - 'Runtime Error'
This application has requested the Runtime to terminate in an unusual way. Please contact the support team for further assistnace.

Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong during the removal.

Unknown error after install itunes 8 and starting Genius

I can no longer connect with my AirTunes. Each time I try I get an "unknown error (-3256)" message.
Tried restarting and reconfiguring, no go.
Anyone else experiencing similar difficulty?

I am having the exact same problem. I checked what version of Airpot Utility I am using and it is 6.3.
I checked for any updates and there was one for Front Row. The update said it would fix problems with ITunes also. But still no luck.
Can anyone help?
Thanks

Getting a reistry error after installing telling me to reinstall itunes

I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

After installing itunes it says it encountered errors as it couldnt be configured, any ideas??

After installing itunes it says it encountered errors as it couldnt be configured, need help asap please

I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

After installing itunes 10.5 itunes wont open it says i have an error , i need help so i can update my ipod , HELP!!

after instaling itunes 10.5 i cant open itunes , my pc says its an error . . what do i do ?

In order to download iTunes 10.7, which requires OS X 10.6.8, you have to buy OS X 10.6. It's available from the online Apple store, in the US by calling 800-MY-APPLE, or online here. After OS X 10.6 installation, run Software Update until there are no more updates available, at which point you'll be at OS X 10.6.8 and can install iTunes 10.7.

ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeX

Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Audio Configuration error after installing iTunes 7.1.1

Similar Messages

Maybe you are looking for