Audio configuration?,,,I need the right configuration...

Anyone know why i have this error? I tried to transfer my itunes libarary into a file in my music, then uninstall itunes, then re-install itunes to find my music in my newly created folder, to transfer my itunes libaray into my itunes.. then i went to re-install, then baam...
I get the error my audio configuration is not set up properly...
HELP ME>>>>>>>>>
'THANKS'

Since iTunes uses QuickTime to play its audio/video, and error message like that most likely indicates that the problem is being caused by some failure with your QuickTime program.
Try out the suggestions in this article:
iTunes for Windows: iTunes has detected an audio configuration problem
-Kylene

Similar Messages

  • Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

    Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
    You can also send my answer to [email protected]
    Thanks in advance for all who will help.
    slovebk

    refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
    http://support.apple.com/kb/HT1380
    Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
    Have a nice day!

  • I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit.  Does anyone know how to fix this problem?

    I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit.  Does anyone know how to fix this problem?

    Hi alexanderfrommilton,
    First try reinstalling itunes.

  • I need the right plug in for my online tech training course--HELP!

    I need the right plug in for my online tech training course--it requires Macropedia Flash Player 8 and Internet Exploder 8 (but worked with my Safari ver 5.06). I updated my iMac software and Acrobat application software and now it won't show the study material nor animations.... I have MacOSX ver 10.5.8, 2GHz Intel Core 2 Duo 1 GB 667 MHz and Acrobat X.   How do I get back to what I had previously?!? PS: my Time Machine is not setup so that won't do the trick this time...

    About Safari 5.1.7 and Leopard Security Update 2012-003
    Summary
    Learn about Safari 5.1.7 and Leopard Security Update 2012-003.
    Products Affected
    Mac OS X 10.5, Product Security, Safari 5.1 (Mac OS X 10.6), Safari 5.1 (OS X Lion)
    Safari 5.1.7 for OS X Lion, Safari 5.1.7 for OS X Snow Leopard, and Leopard Security Update 2012-003 disable out-of-date versions of Adobe Flash Player.
    Out-of-date versions of Adobe Flash Player do not include the latest security updates and will be disabled to help keep your Mac secure. If Safari 5.1.7 or Leopard Security Update 2012-003 detects an out-of-date version of Flash Player on your system, you will see a dialog informing you that Flash Player has been disabled. The dialog provides the option to go directly to Adobe's website, where you can download and install an updated version of Flash Player.
    Additional Information
    If you need to re-enable an out-of-date version of Flash Player, you can do the following:
    Navigate to the /Library/Internet Plug-Ins (Disabled) folder.
    Drag "Flash Player.plugin" into /Library/Internet Plug-Ins.
    If the browser is running, quit and restart it.
    http://support.apple.com/kb/HT5271
    http://support.apple.com/kb/HT5655

  • Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?

    Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?  where can I find this codec?

    hey, I'm not sure if I've set it up for hard drive video.  When I
    try to import it says it's the wrong codec.  I had a similar problem with windows moviemaker.
    except the error message there (moviemaker) said 'too many methods firing from events'
      hmmm.  I don't know what it all means.  I have an hdd sony digital handycam.
    dcr-sr45 is the model.  any suggestions?

  • Power Mac G5 Audio is outputting only the right channel

    I have an audio problem with my PowerPc Audio card, I presume. It is only outputting the right channel. I have a set of computer speakers and when I go into System Preferences and move the balance slider, there is only sound coming from the right channel. Absolutely nothing from the left.
    I found this problem when editing in FCP and needing to do a split track with VO on channel 1 and Nats and music on channel 2. I could see the meters showing the audio output from channel 1 but no sound coming through the Mac's left channel output.
    Also, I have a DeckLink extreme card in my system and when I test the L-R channel output I get the same problem. I do not know if the decklink is somehow using the Mac audio card for help with its output. I would think that it is using its own hardware for generating the audio output from the card.
    Hardware issue? Time for a Mac Genius repair? Don't know if there is any workarounds or fixes before I go that route. Any help would be appreciated.
    Thanks
    Doug

    No I didn't but I run my Mac's output into an analog mixer and then out to my speakers.
    When outputting through channel 2 only, both speakers work, yet when I pan to channel 1 the sound drops out. As I pan from full channel 2, where both speakers are up full, you can hear the sound fade out.
    Also, I got the Deck Link card to work through my mixer. The L and R channels are outputting through separate inputs in the mixer and work independently and correctly. I even changed out the mini stereo cable just in case and still no left channel out of the Mac.
    Very weird! I've even repaired and defragged my system disk in case it is some sort of corrupted code. Just grasping at straws before I take it to a Mac Genius.
    Thanks for writing. I appreciate any and all suggestions.
    Doug

  • New iMac and Logitech-z5500... need the right cable.

    so I read on some forums that you need a optical cable and a mini plug adapter.
    is this the right cable?
    http://www.clickok.se/PartDetail.aspx?q=p:919456;c:36142
    I want all of the speakers to work when I watch movies which supports 5.1 audio.

    Yes, that should work fine.

  • My ipod audio only coming through the right headphone whats wrong?, My ipod audio only coming through the right headphone whats wrong?

    Ive tried with mulitple headphones but my audio on my ipod is only coming through the right headphone. Whats wrong with my ipod? WIll I need to purchase another one?

    I don't know if this is a common issue: I bought an iphone from someone and notice that only the plug design of the stereo headphone that comes with it fits in its receptacle. I tried others that are generally for the same size but they can't go deep enough in the receptacle thus can't get any audio. One thing I noticed is that this iphone's receptacle is deeper in the device than usual, so any other plugs other than the one provided can't fit. I can't use my external speakers with it!!! I fail to understand this. All all iphones like this or is it a defect particular to mine? After all, my ipod touch doesn't have this issue! If anybody knows, please tell me.

  • Much of my audio was moved to the right +.6

    Yesterday I did a lot of editing with the timing of clips. I would find some clips coming in too soon so I would make adjustments to make them start later so as to make the pacing and flow of the video better.
    The video is long at almost 2 hours. I thought with all the changes I was making I (thought I) was keeping all the audio in line with all the video, however I did not think to be constantly looking far down the timeline to make sure.
    Today I started looking farther down the timeline and noticed in all the rest of the video past where I had made changes, many audio clips had been moved to the right .6 I started to try to manually move it all back but found it would take just as long to do that as to redo all the editing I did yesterday. Plus some audio is purposefully out of line and I think I would lose track of those that are supposed to be out of line and those that were thrown off yesterday.
    Today after every edit I make I'm going to look at the entire timeline to make sure my audio has not been thrown off so that hopefully I can understand which changes that I made caused this.
    Does anyone have any tips to prevent this from happening again? Thanks.

    If you decide not to follow Ken's very good advice, another option is to make sure that all your audio tracks are temporarily locked before making any video-only edits. This will prevent inadvertent changes to your audio tracks.
    Also, it is always a good practice to briefly inspect your timeline after each edit. It takes only a second or two and can help you quickly spot any errors that may have be added to your timeline as a result of the edit.

  • I need the right download file for CS4 Design standard.

    i can not install cs4 from the cd's i bought a few years ago and i can not find the right download file so i can go use again

    yes i do think so the cs4 design standard
    ADBESTPPCS4_LS1.dmg
    STPPCS4_Cont_LS1-2
    once i start the set up it lounges and asks for my serial number which i have on the back of the dvd box i got
    and then i get this .... and it is the right serial number
    Invalid Serial Number
    The serial number you entered is not valid. Click OK to retry entering the serial number.

  • Is there a way to highlight all files (video & audio) that are to the right of the playhead on my timeline? Or to the right of my mouse?

    I have a complex project in which I have divided half of the video clips to the left of my timeline, and another half to the right. I now want to drag the finished right half, and connect it to the left half, but there are so many files high up in video slot 7, that I can't click and drag to highlight them all. What do I do?

    Track selection tool does that.
    Adobe Premiere Pro Help | Find, select, and group clips in a sequence
    A Tip on the side:
    in your specific case the fastest action would be to highlight the gap in between your clips and ripple delete.
    Lift and extract, delete, and ripple-delete clips | Adobe Premiere Pro CC tutorials
    (the tutorial shows the ripple delete - function with a clip segment, but it works the same way with gaps.
    Hope that clarifies a bit for you.
    ... and keep smiling

  • Need the right charger for my Satellite C660D-153

    Hey,
    Sorry to be a bit ignorant but I need a replacement charger for my Satellite C660D-153. Just wondered if there was a right or wrong one to get?
    Thanks
    Sidler28

    Hello,
    I would also like to order a new laptop charger. My laptop is a C660D (not sure about the "-153") and I have the serial and model number of the charger at hand. Where I can submit an order? Tried to fill out a support e-mail but it failed to submit twice.
    Thanks.

  • Searching for BIOS Update (UEFI) for HP 650 - need the right Version

    Hey there,
    my Bios is broken and for recovering I need:
    BIOS Update Unified Extensible Firmware Interface (UEFI)
    for HP 650
    Can someone help me?

    Thanks for the information. It does help.
    If you removed the original partitions then you are correct, UEFI is no more. That is why the Startup menu does not appear.
    You will need to use the recovery disk set or USB thumbdrive media that you created and put aside. That was your plan "b". Booting into Recovery Manager and performing a factory image recovery will restore the original partitioning scheme and the UEFI environment.
    There does exist a possibility of recovering a BIOS.
    Put a BIOS ROM file on the root of a USB thumbdrive formatted in FA32.
    Plug it into a USB port.
    Plug in the power adapter and verify that the power led is lit.
    Press the Power button and hold the Windows key and tap the "B" key
    Your notebook may recover the BIOS at that point.
    There is no guarantee that this will work. You may end up having  to send it in to HP to recover the BIOS and operating system.
    I will edit this and supply a link to a BIOS right here.  Use the F.12 version on this page. You will need Winrar or winzip or 7zip to extract it from the softpaq and copy to the thumbdrive.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need the right flash unit for Canon Rebel EOS T3i to use as separate fill light.

    Im looking to have a separate flash unit for my Rebel T3i purchased in 2012.    My old Canon speedlight 300EZ was for my old 35mm. film Canon EOS 650 and is somewhat limited.   I have a Phottix Strato II Multi Transmitter and Receiver set but I can't get it to work with the old 300 EZ speedlight.
    Thanks,
    Zeida Cecilia-Mendez

    A Canon 430ex would be a good flash for not a lot of money. So would a Phottix Mitros.
    The best thing would be to have 2 or 3 flashes so you can shoot with a more 3-d professional look, though you'd need an extra receiver or else you can simply buy a pair of Phottix Mitros Plus flashes, which have a transmitter and receiver built in. I have 3 of the Mitros + units and I love them.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Need the right hardware (cord) to connect my new HP Pavillion thin notebook to older projectors​.

    What hardware is needed to phsically my HP Pavillion notebook to older monitors? my computer does not have a place to plug in the prong type connection cord. Is there an adapter?
    This question was solved.
    View Solution.

    This is what your looking for:
    http://h30094.www3.hp.com/product/sku/10464062
    http://www.amazon.com/gp/aw/d/B007PLL4CK/ref=redir​_mdp_mobile?keywords=HDMI%20to%20VGA&qid=140433496​...
    http://www.amazon.com/gp/aw/d/B007PLL4CK/ref=redir​_mdp_mobile?keywords=hdmi%20to%20vga%20converter&q​...
    Thanks,
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

Maybe you are looking for

  • XSLT or Scripts (Mac -Indesign CS3)

    Good Morning Everybody, We are planning now to move our Journal (XML) production into Indesign CS3. I've been successfully (though with limitations, as I am newbie in Indesign) implemented our books productions into Indesign CS2. This has been achiev

  • Using iWeb for e-mail marketing

    I am trying to create my own template in Iweb to use for e-mail marketing. However, I am having trouble importing my template into the e-mail marketing program I am using- I'm not really sure what files to choose. I tried to use the css and html file

  • How to transfer photos from curve 9300 to pc in a Vista OS

    How do I transfer photos taken by my Blackberry Curve 9300 to my pc, which uses a Vista OS?  With the Blackberry Desktop software I synchronized the data and I backed up the phone, but I cannot find the photos on the pc.  The backup files cannot be o

  • Migrate from Kerio E-mail to OS 10.4

    Hi All, Does anyone have a good manual or know how to move FROM Kerio e-mail to MAC OS Server 10.4 ? This is my first time attempting this and would be very helpful. Thank you!

  • Finder Hanging On Startup, Restart

    This just started several days ago; the Finder hangs after a normal startup. After say, three minutes, everything finishes loading to my desktop and system operation is normal, other than the HD seems to perhaps be running too much. Here is my consol