Audio configuration is dammaged??? how to solve??

Hi all,
im getting a message that reads this in one of my projects:
Audio configuration is dammaged.
it only gives me an o.k option.
what is this and how can i fix??
thanx
marc

There is nothing you can do about this but starting a fresh project and copying pasting everything into the new project.
From time to time projects get corrupted, this happens more frequently in Logic 8 than in former versions. Besides that message, does the project behave strangely or do you just get the message without noticing any problems?

Similar Messages

  • Mac Mini resets audio configuration on reboot - how can I stop this?

    Hello all,
         Specs up front :  Mac mini 4,1 mid 2010 server model (running client OS not server) 8Gb RAM
    I had a problem with one of the RAM slots a couple months back and had to take the computer in for repair at the Apple store where they replaced the logic board.  Now every time I reboot the computer the audio out configuration switches to HF289H (which I assume is the speakers on my monitor, a Hanspree 28" that is connected via HDMI cable).  Selecting the audio out options I notice that and "headphones" - choosing headphones will switch the sound output to the speakers connected.
         However on every reboot it reverts.  Is there some setting I can apply to make the computer "remember" how I want the output set?
    Much thanks.

    You don't tell us what Mac OS version you're running. I'll assume it's 10.7. Select Safari > Preferences > Privacy > "Remove all website data." Then quit Safari and relaunch it by holding down the shift key and clicking its icon in the Dock. That will stop the page from reloading automatically.
    Open your Downloads folder and delete anything you don't recognize.

  • Itunes won't run because of some problem with my audio configuration? help!

    it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    Good luck.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Problem detected with audio configuration

    I have had itunes for a few years now and never had a problem i just recently updated to itunes 7 and it worked fine for about a day and since then i have not been able to open it i have tried uninstalling and reinstalling, whe i try to open it i get the message "iTunes cannot run because it has detected a problem with your audio configuration" anyone know how to fix that?

    "iTunes cannot run because it has detected a problem with your audio configuration"
    that is usually caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's first try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

    I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
    Two things:
    1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
    2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......".  I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
    Obviously it will fit.
    What am I doing wrong, all of a sudden?

    Hey ryclark,
    Thanks for responding. Something else is going on here.....
    Here's what I re-replied to our friend...
    Thanks for the response.
    When I built this computer last Nov/Dec, it was built with the second 
    fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's  running
    Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard 
    drive space. It is set up with 64 bit. I had been using Audition CS3 for  many
    years and even go back to it's origin: Cool Edit and Cool Edit Pro. My 
    learning curve was minimal, sans the CD burning, which I used other software
    for  which is now antiquated, so I need Audition for this. Between this and 
    IZotope 3 I've repaired and improved many a recording. All-in-all extremely 
    useful software.
    As for the idea "to burn it anyway", well the error message comes up and 
    that's it - if I "X" out of that message and try to burn again the message
    comes  back  - so Audition will not let me. It is convinced that this file is 
    longer than it really is, but only when I add track  marks to it!
    There are only 11 tracks.
    I was able to burn a CD of this same file but without all the track marks, 
    so the same exact file length/size will burn, only as the one track.
    I've also succeeded in burning other WAV's , both greater and smaller, with
    and without multiple track marks, without issue. Of course all with less 
    than the CD's max. capacity.
    This problem seems to be with this one file. I've even  re-made/re-recorded
    the file from scratch with no change. There's something else  going on here
    that I can't put my finger on. (I am "recording" LP's and making  personal
    CDs of them)
    Also, only from time to time, I have another error after burning a CD that 
    states it could not verify the CD. For this I assume it is the blank rather
    than AA? The first might burn without issue and with the second burn I 
    get the error. It is near the end of a stack of blanks, so.....
    As for the need to "mark the end" of the file makes a lot of sense but of 
    all the other CD track-marking software I've used, none needed one to do
    this,  but this IS Adobe after all.
    You'd think there might be a smidge of intuitiveness with Adobe, but maybe 
    not.
    - Mark
    In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time, 
    [email protected] writes:
    How  to solve Audition CS6 error "The amount of audio to burn will not fit
    on  the CD........."?
    created by ryclark (https://forums.adobe.com/people/ryclark)  in 
    Audition CS5.5, CS6 & CC - View the full  discussion
    (https://forums.adobe.com/message/6605916#6605916)

  • This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

    Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

    Hi B, thanks so much for helping me troubleshoot !!
    Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
    * Sound Playback Default Device = No Playback Devices.
    * Sound Recording Default Device = No Playback Devices.
    * MIDI Music Playback Default Device = No MIDI Playback Devices.
    All text in this drop-down box were light grey, and therefore unable to be selected or altered.
    I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
    Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
    Thanks again,
    Shell

  • How to solve this Data Configuration issue with error message ORA: 01017

    Bad public user name or password. ORA-01017: invalid username/password; logon denied
    How to solve this?

    I'm using JCreator jdk1.5.0_7.But i don't know how
    to use command prompt. When i execute my program, the
    command prompt showed
    Exception in thread "main"
    java.lang.NoClassDefFoundError: StringManipulation
    Press any key to continue...So you managed to compile your code since now you are running it. This error means that the class StringManipulation was not found. Usually an indicator that your classpath is incorrect.
    What did you do to generate this error? That is, how did you execute your program?
    [edit] if you did not compile your code then there is no class file StringManipulation.class and this error will appear.

  • Cannot run because it has detected a problem with your AUDIO CONFIGURATION

    past few days been unable to open iTunes application - instead error message is displayed saying:
    iTunes cannot run because it has detected a problem with you audio configuration
    unsure how to solve this issue

    This error occured to me recently and i just simply restarted my pc and it was cured.
    The usual little volume icon that sits in the tray at the bottom right of my desktop had vanished and i couldnt play any music via itunes, win media player or any media player. But as i say a simple restart cured it.
    HP   Windows XP  

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • Itunes cant open due to Audio Configurations

    I was Messing with my sound settings because of an over the internet Voice program called Ventrillo I don't think that the Program has anything to do with the error but I don't know how to get either itunes to open or how to get my sound settings back to default

    Does this help?
    iTunes has detected an audio configuration problem

  • Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Hello FranBNYC
    It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How to solve extra commas in CSV files in FCC..!!

    Hi,
    I have the CSV file with comma(,) separator which has around 50 fields. Among them there were some description fields which has comma (ex: karan,kumar) which has to come as a single field and comes as 51 fields instead of 50.
    Due to this, im facing problem at File content conversion and it is failing with error " ERROR converting document line no. 8534 according to structure 'Header':java.lang.Exception: ERROR in configuration / structure 'Header.': More elements in file csv structure than field names specified!
    We have around 10 fields which comes in this way.Any idea how to solve this issue?
    Thanks
    Deepthi.

    Hello Deepthi,
                 The option here is use fieldFixedLengths instead of fieldSeparator. By this way evethough you have more fields in file than given filednames, it will not trigger any error. (But this one will still keep the commas which you might not need in the xml structure, though you can replace these in mapping anyway this is one solution )
    enclosureSign option you can try, but you need do include the delimeter in you file structure, which is again a troublesum.
    eg:- field1, | karan,kumar|,fieldn
    In case you are familier with Adapter Module you can do it  easily, but its a final option as far i am concern.
    Regards,
    Prasanna

  • Failure to launch...audio configuration issue!

    I just upgraded to 7.0.2 and now iTunes will not launch. When I try to open iTunes I get the following message: "iTunes cannot run because it has detected a problem with your audio configuration."
    This has never ocurred before and I don't know how to fix this annoying problem. I've tried a few of the troubleshooting options but none of them worked.
    What should I do???
    Dell Inspiron 6000   Windows XP  

    "iTunes cannot run because it has detected a problem with your audio configuration."
    that one is typically associated with a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's first try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • "Out of memory" message when trying to copy audio configuration between songs

    Hello again,
    Any suggestion welcome about how to do paste an audio configuration successfully in 9.1.8. Here both the source and target songs are quite light stuff, 20 tracks, not much automation, never more than 3 inserts. The computer has 16 GB of Ram. Not sure if Logic X has the same problem but I can't afford to switch just yet. Please help if you can... Thanks !

    Mbelekete,
    Although I am in 64 bit mode,
    Are you sure? Go to Logic Pro's menu bar, About Logic Pro and check the pop up widnow for it to actually say 64bit mode as some people have reported unchecking the 32bit mode option in Get Info but Logic continued to boot up in 32bit mode usually because of a permissions issue with their Applications folder.
    Anyhow.. assuming you really running Logic Pro 9  in 64bit mode
    Logic only uses more memory when it needs to do so... such as when loading in large sample libraries... for example. so by default it will only use, say 3GB of Ram itself upon start...
    Safari caneasily  use more memory depending on for example,  how many tabs you have open.. what the websites you are viewing use.. such as HTML5, Java routines.. Flash etc.. and so on.... So its not so strange really.

Maybe you are looking for